Resume - Sixteen years experience in inspection such as Piping and Structure Inspector, P...

Misco Jobs

Resume #53126

CONTACT INFORMATION:
View contact information...

List of present & previous Company

Jun 2006 to present: Carigali Hess Operating company Sdn. Bhd.
Nov 2004 to May 2006: OGP Technical Services Sdn. Bhd.
Nov 2003 to Nov 2004: Arashins Services (J) Sdn. Bhd.
August 2003 to Oct 2003: K & K Sepadu Sdn. Bhd.
July 2002 to July 2003: Arashins Services (J) Sdn. Bhd.
Feb 2002 to May 2002: Yongchan Jaya Engineering Sdn Bhd
April 2001 to Jan 2002: Alstom Export Sdn. Bhd.
Sept 2000 to Feb 2001: Amerstrand Engineering Sdn. Bhd.
Sept 1999 to May 2000: Malaysia Shipyard and Engineering Sdn. Bhd.
March 1999 to July 1999: Penang Shipbuilding and Construction.
June 1998 to Feb 1999: Gunawan Iron and Steel Sdn. Bhd.
June 1996 to May 1998: Time Salam Lavalin Construction J.V.,SNC & GTMI J.V.
Dec 1994 to May 1996: Teknispek Sdn. Bhd.
Nov 1993 to Nov 1994: Sime Sembawang Engineering Sdn. Bhd.
July 1992 to Nov 1993: Malaysia Shipyard and Engineering Sdn. Bhd.

COURSE ATTENDED
July 2006: Incident Investigation course
Conduct by Risk Global Technologies Sdn. Bhd.
Kuala Lumpur.
June 2006: Basic Offshore safety,Sea survivaland helicopter underwater
Escape training, basic fire fighting, first aid CPR/EAR.
Offshore safety Sdn.Bhd. Kuala Lumpur.
May 2001: Construction Industry Development Board Malaysia (CIDB)
Supervisor for Mechanical Works
August 2000: Welding Inspector – CSWIP ( RTO / QA7 )
Ruane & T.P O'neill. TATI Terengganu.
Sept 1994: Magnetic Partical Inspection Course
Organised by Mr. Saharuddin Kambari
NDT Level III from NDE Consultancy Services
June 1994: Total Quality Management (TQM)
Conducted By Mr. Azaddin Aziz
QA/QC Manager
Sime Sembawang Engineering Sdn. Bhd.
Pasir Gudang Johor.
Nov 1993: In House Training – ASNT Level II
MPI and DPI
Sime Sembawang Engineering Sdn. Bhd.

WORKING EXPERIENCE ( 1 )

Turn Around / Shut Down Jobs

Nov to Dec 2002: Corro-shield (M) Sdn Bhd. Miri Sarawak
Position: Inspector
Location: Petronas Methanol (Labuan) Sdn. Bhd.
WP Labuan. Sabah.

Jun 2002: Arashins Services (J) Sdn Bhd
Position: Inspector
Location: 1) Kaneka (M) Sdn Bhd, Gebeng, Kuantan
2) Petronas CUF (M) Sdn Bhd, Kertih, Terengganu

May 2002: S.E.M Inspection Sdn Bhd, Shah Alam, Selangor
Position: Inspector
Location: PSR-1 Turn Around May 2002
Petronas Penapisan Melaka Sdn Bhd
Sungai Udang, Melaka

July 2000: Pakaruji Sdn Bhd.
Position: Inspector
Location: FPG Oleo chemical Sdn Bhd, Kuantan, Pahang

WORKING EXPERIENCE ( 2 )

Jun 2006 to present: Carigali Hess Operating Company Sdn. Bhd.
Position: Structural Welding Inspector
Project: Brown field Construction (Fast Track Project)
Cakerawala Gas field Development Phase 2
KHL yard. Lumut Perak.

Scope of Work: Monitor All welding NDT activities as per contract requirement (structure and Piping).
Review NDT result and witness Welder Qualification
Test (WQT) to qualify welder.
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.
Report to the Client Site Representative (CSR) for area assignment.
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

Nov 2004 to May 2006: OGP Technical Services Sdn. Bhd.
( A Member of PETRONAS Group of Companies)
Client: Petrodar Operating Company (PDOC)
Republic of Sudan,
Position: Welding Technical Inspector
(Project management Consultant)
Project: Central Processing Facilities (CPF)
Al-Jabalayn site
MELUT Basin Oil Development Project
Block 3&7 (Upstream)
Republic of Sudan,

Scope of Work: Monitor all welding and NDT activities as per contract requirement (piping, tanks. Pipeline, mechanical and pile caps)
Review NDT result and witness Welder Qualification Test
(WQT)to qualify welder.
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the specification and procedure.
Report to the site manager for area assignment

Dec 2003 to Nov 2004: Arashins Services (J) Sdn. Bhd.
Taman Rinting, Masai, Johor Darul Ta'zim
Client: Sime Sembcorp Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: Structural Welding Inspector
Project: Talisman Energy
East Bunga Raya BR-E CO2 PLATFORM.
: West Africa Field Development FPSO Project
MODEC International LLC. Singapore.
(Fast Track Project)

Scope of Work: Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications
Request NDT on Complete joint as per contract requirement
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

August 2003 to November 2003: K & K Sepadu Sdn. Bhd.
Petaling Jaya, Selangor.
Client: Gas Malaysia Sdn. Bhd.(GMSB)
Position: Pipeline QC Supervisor
Project: EPCC of NGDS to Super Food Technology (6 inch-1.75km)
Mukim Plentong, Masai, Johor Darul Ta'zim.

Scope of work: Witness and monitoring welding activities,
Fit-up and visual inspection of each weld,
Witness and monitoring holiday testing and wrapping around the joint,
Request and monitoring Radiography activities,
Preparation Pre lowering acceptance report and lower in report, approval for backfill.
To monitor weld summary Record and compile for the final documentations.

July 2002 to July 2003: Arashins Services (J) Sdn. Bhd.
Taman Rinting, Masai, Johor Darul Ta'zim.
Client: Sime Sembcorp Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: Structural Welding Inspector
Project: Petronas Carigali Sdn. Bhd.
Angsi C & E Topside and Jacket
(Fast track Project)
Sarawak Shell Berhad
B11DR-A Jacket

Scope of Work: Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications
Request NDT on Complete joint as per contract requirement.
To monitor weld summary record and compile for the final documentations
Monitor tie-down jobs during load-out activities

Feb 2002 to May 2002: Yongchan Jaya Engineering Sdn Bhd
Johor Bahru, Johor
Position: QA/QC Supervisor – (Structural, Piping, painting)
Project: Gadong Power Station
Brunei Darussalam
Client: Shinwa Corporation Pte. Ltd. Japan
Scope of work: Arrange sub-ordinate to do the job as per client's requirement.
Inspection of all fit-up and visual during fabrication and installation as per ITP.
Perform dimensional check of structure
Perform Welder Qualification Test (WQT) to qualify welder.
Review NDT report before submit to client for review.
Monitor and inspect on painting work after fabrication.
To monitor weld summary record and compile for the final documentation.

April 2001 to Jan 2002: Alstom Power Sdn. Bhd.
Petaling Jaya, Selangor
Position: Piping Inspector
Project: 3 x 700 MW Combined Cycle Coal Fired Boiler
Manjung Power Station, Perak.

Scope of work: Inspection of all fit-up and visual during pre- fabrication and installation.
Perform Welder Qualification Test (WQT) to qualify welder.
Review NDT report before submit to client for endorsement.
Perform line check together with client and sub-
Contractor for any rectification.
To monitor coating work for underground pipe line(fresh water)
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation

Sept 2000 to Feb 2001: Amerstrand Engineering Sdn. Bhd.
c/o SIME Sembcorp Engineering
Pasir Gudang, Johor
Position: Qa / Qc Coordinator – Piping
Project: Petronas Carigali Sdn. Bhd.
Angsi- A Topside

Scope of work: Arrange subordinate to do the job as per client request.
Inspection of all fit-up and visual during pre-
fabrication and installation.
Perform line check together with client and sub-
Contractor for any rectification.
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation

Sept 1999 to May 2000: Malaysia Shipyard and Engineering Sdn. Bhd.
Pasir Gudang, Johor.
Position: QC Inspector – Structural & GRE Piping
Project: Petronas Carigali Sdn. Bhd.
ANDR-A Topside and Jacket.

Scope of work: Inspection of all fit-up and visual during pre-
fabrication and installations
Liase with client representative and PMT on matter related to quality.
Perform Inspection as per ITP.
Monitor of all welding activities during fabrications Perform line check together with client and sub-
contractor for any rectification.
To witness for flushing and hydro test, to monitor weld summary record and compile for the final documentation.

March 1999 to July 1999: Penang Shipbuilding and Construction Sdn.Bhd
Kemaman Supply Base (KSB) Kemaman,Terenganu.
Position: QC Inspector – Piping & Structural
Project: Esso Production Malaysia Inc (EPMI)
GUD-12 Angsi Host Tie-in and Tabu-11 Gas Injection

Scope of work: Conduct welder qualification test, prepare welder certificate, carry out material inspection, material verification, fit-up inspection, visual inspection, request NDT, interpret RT result, prepare hydro test report, prepare welding summary and prepare manufacturing data report.

June 1998 to Feb 1999: Gunawan Iron & Steel Sdn Bhd
Phase 2 Project
Kemaman, Terenganu
Position: Welding QA/ QC Inspector (Piping & Mechanical)
Power Station Department

Scope of Work: Carry out inspection of structure, piping including underground pipeline (coating work) and pressure vessel such as material inspection, fit-up inspection, roundness inspection, straightness inspection,
Witness hydro test, NDT final inspection and prepare manufacturing data report.
Supervise all welding and NDT activities as per contract requirement.
Review NDT result and recommend acceptance/ rejection of contract work.
Report to the respective area Construction manager for area assignment.
Material receiving, inspection of material equipment and approved equipment for installation on site.
Inspected and verified positioning of equipment prior to anchor bolt grouted.
Inspected and verified verticality, horizontality &
levelling of static and rotating equipment.
Inspected and verified preliminary alignment, pipe stress and final alignment of rotation equipment.
Welding inspection for fabrication of shell and water box condenser (Fit-up, visual and witnessed N.D.T
Inspection).
Signing inspection report of acceptance of all the above inspection results.
Monitoring contractor work activities to ensure all works are performed in accordance with the installation specification and procedure.

June 1996 to May 1998: Time Salam Lavalin Construction J.V.
Taman Megah, Petaling Jaya
Project: PUTRA-KLRT System 2 (for Kuala Lumpur)

Position: QC Inspector (Track Work, Civil & Welding)
Scope of work: 1) Checking concrete work as per Stated below:
- Slump Test
- Pressure Test
- Dial Gauge Test
- Sieve Analysis & Moisture Analysis
- Checking & Supervising casting Concrete Operation
- Checking as built thickness of panel according to drawing and cut sheet
- Filing report and submit to QC Manager.

2)Track works as per stated below:
- Study drawing, specification and procedure of works.
- To observe and witness with format sheet for operation progress as per stated below:
- assembly and placement of turn out
- assembly and installation special track work
(cross over) tie placement and spacing rail installation flash butt welding
- thermit welding bonded joints distressing operation linear induction module installation
- power rail study and power rail installation
- cable trench installation - fine tuning track
- filing report and submit to QC Manager

3)Cut & Cover Work (tunnel section) as per stated below: - Inspection of Bored Pile:
- with 600 mm, 800 mm & 1200 mm of diameter.
- Checking reinforcement before installation
- Checking concrete before pouring.
- Inspection of Starter Bars:
- measured and make sure length of the starter bars as in order refer to the drawing.
- Checking the reinforcement for base slab before concreting
- Dealing with sub contractor & consultant.
- Reporting to QC Manager & Consultant.

December 1994 to May 1996: Teknispek Sdn Bhd
Damansara Height Kuala Lumpur
Position: NDT Technician
ASNT Level 2-MPI & DPI
ASNT Level 1-UT
ASNT Level 1-RT
Assistant General Inspector

Project: Esso Production Malaysia Inc (EPMI)

Offshore: Jerneh-A
Semangkuk-A&B
Guntung-A&D
Tapis-A,B,C&D
Seligi-A
Bekok-A
Tioman Drilling (T-2)

Onshore: Sludgecatcher Terminal (OSC) Kerteh.
: Terengganu Crude Oil Terminal (TCOT), Kerteh.
: Tepat Teknik,Kemaman Supply Base(KSB),Kemaman.
: Petronas Penapisan Terengganu (PPT), Kerteh.
: Promet-Petronas Terengganu,Teluk Ramunia,Johor.
: Sarawak Shell Berhad(SSB),Pasir Gudang,Johor.
: Antara Steel Sdn.Bhd., Pasir Gudang, Johor.

Scope of work: To carry out Magnetic Partical Inspection and Dye
Penetrant
: Inspection and Radiography Testing on various type of weld configuration and other material.
: Thickness measurement of material.
: Job including reporting and documentation as per client requirement.
: Shutdown job.

Nov 1993-Nov 1994: Sime Sembcorp Engineering Sdn.Bhd
Pasir Gudang,Johor

Position: NDT Technician
ASNT Level 2

Project: EPMI Jerneh 'A'
- Compression Module 2
- Compression Module 3
- Compression Module 4
- Compression Module 5

: EPMI Guntong 'D'
- Production Module 1
- Production Module 2
- Production Module 3
- Production Module 4

Scope of Work: Performed MPI on various type of beam plate and pipe with various diameter.
: Performed MPI and DPI on piping with various material type

Project: Sarawak Sheel Berhad (SSB)
- M 1 Living Quarters
- M 3 Living Quarters

Scope of Work: Performed MPI on M 1 and M 3 plate girder fabrication.

Project: Sarawak Shell Berhad (SSB)
Integrated Production Module-M3PQ-A

Scope of Work: Performed MPI on M3PQ-A Structure.

Project: Tenaga Nasional Berhad (TNB)
Diverter Valve and Guillotine for Pasir Gudang Power
Station and Paka Power Station.

July 1992-Nov 1993: Malaysian Shipyard and Engineering Sdn. Bhd.
Pasir Gudang,Johor.

Position: Machinery Fitter

Scope of Work: Performed – Overall Ship Maintenance.
: Repairing for diesel main engine and accessories.
: Repairing for diesel generator engine and accessories.
: Repairing and alignment for shafting and propeller.
: Repairing and alignment for turbo charger turbine engine.
: Repairing for anchor winch.
: Repairing for marine gearbox and marine clutch.
: Repairing and alignment for electrical pump and centrifugal pump.
: Repairing for hydraulic and pneumatic system.
: Repairing many type of valve.
: Repairing for bow trustier at marine container ship.
: Sea-trial.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1520)

Go to Search Parameters...

Brief Description

Im a computer programmer since i started working in 1990 i know cobol,unix,informix ,sql,v.basic,oracle

My duties as a Rig Mechanic have included the installation, repair, maintenance, and commissioning, of the rig and all equipment associated with, and involved in the drilling operation.

Oil Industry Business Builder

Experinced seaman of over 12yrs on boats

Oil & Gas Land services

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Computer knowledge, documentation, teaching, research works and quick learner.

API 570/653 With excellent database skills

Health & Safety Professional, Post Grdadute Diploma, Various HSE Courses & Certifications Completed.

I am very keen to work in the offshore oil industry. I have been thinking about it since some years ago, so that idea is already very mature. I am willing to start at the bottom. Therefore, I am looking for a job as a Roustabout.

Looking for an Interesting and Challenging Position in Occupational Safety

I have worked in the oil and gas industry for over 25 years. I have managed a drilling rig, drilled, supervised,ran core jobs, PDC Bits supervision and much more. I have all my saftey tickest and much much more.

Training/HR Professional, Vocational Assessor experienced in Performance Consultancy, Development, Recruitment, Objective/Competence Based Training Systems and Certification within Oil/Gas, Nuclear, Defense and Railway Industries, Training and Development in Multi-cultural Environments.

24 years overall experince in records management in engineering industries. exposure in setting up document control centre, training to staff, document management from generation of document list to archives, final documentation. can handle software like inforworks/ documentum etc..

To obtain a position with a respected, safety oriented company, where I would be challenged and able to use my knowledge and training in the HSE, management and enforcement fields, to help create and/or maintain a safe working environment for all its employees.

29 plus years in the oil and gas production. All phases in the operation of oil and gas production platforms. Design, build, install and trouble shoot pneumatic and hyfraulic safety and control systems.

SAP PM Consultant, having in-depth knowledge of both SAP-PM and Pacer-M.

Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

I am a Class I Marine Engineer certified by the Ministry of Transport and Merchant Marine, Morocco.

22 years oil field Experians. Higher secondary.

32 years Oil Industy experience in Drilling Fluids / waste Manging / Cementing / Drilling Engineering / Business Develeopment / Project Management. Degree. experience of Cpld weatehr, HTHO, deep water, H2S wells.

Geologist

Information systems - Analyst /Programmer/Project leader/Business Analyst

14 years of professional experience as Chief Accountant and Accountant in reputed companies. Excellent in Accounting, Auditing, and Preparing Account related documents for all needs of a company. Hands on experience in Microsoft Office and Accounting packages like Daceasy, E.X. , Tally etc.

30 years experience with Land Based Drilling Rigs that include SCR, Mechanical, Mobil and Heli Rigs ranging from 800 to 3000 HP, Familiar with Topdrives both Hydraulic and Electric

Experienced Contracts Engineer, Planner, Estimator having worked successfully in all aspects of the industry from North Sea to Australia. Enjoys the challenges of new technologies and new ideas

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

International Finance Manager with extensive experience in the upstream oil and gas business.

20 years + WSS, proficient in Completions (Land, Platform, Sub Sea, Tender, Jack Up) also single, duals, electronic, Wireline, Coil Tubing, HWO. Service Industry background (Otis and Baker Oil Tools). Current contract finishing Sept. As per CV, willing to work in all countries.

11 yrs+ managerial/sales Transferable skills Self-motivated, work under pressure Team player Leadership/interpersonal skills Mentor/train new staff Keen to train for position Optimal levels of strength & fitness Played football & hockey 15 yrs+ Dubai based Start work any time/place

Over 30 years of Construction and Project management work on large scale projects all over the world. Computer literate and fluent in Castilian Spanish and English

PROFILE: Filipino CPA and MBA with 15 years of experience in the fields of audit, finance and accounting

Experienced Landman/ROW Agent

I have over 12 years of experience in sales in the oil and gas industry. I have multiple certifications as you will notice in my resume.

Title Research, Cursory Reports, Mineral Ownership Reports, Leasing of Oil/Gas Properties, Curative Research

I’m looking for a job that offers short or long term possibilities in your cuisine with responsibilities and possibilities of advancement.. I have twenty years experience, with a total of four years of culinary studies in two of French most reputed schools ( Auch and Mazamet ).

RESUME SUMMARY: Experienced mechanic looking for a Experienced company

RESUME Directed seeking Driving position, Cover Page attached, to Resume

Materials/ Logistics Supervisor with 30+ years experience. Extensive knowledge of Drilling , Completions , Workover , Civil Engineering. Good all round computer skills. Good team player with hands on approach to supervision. Ability to work &live in remote locations .

Over 20 years experience in drilling, completion and workover.

Permanent (long term) employment in the oil and gas industry. Equipment Manager or Master Mechanic position.

Supervisor-Oil and Gas/Petrochemical Refineries...Maintenance, construction, piping specialist. Supervision of contract and refinery personel during shutdowns, turnarounds, maintenance and construction. Willing to travel

Comprehensive problem solving abilities. Excellent verbal and written communication skills. Ability to deal with people diplomatically, willingness to learn and team facilitator.

PRODUCTION AND REVENUE ACCOUNTANT

Seeking for challenging and rewarding opportunities in a dynamic and reputable organization where mutual interests and achievements will be maximized.

I have and engineering management degree and currently in an MBA program , and will be through this quarter. Very proficent in MS project tool, MS office tool, minitab

Petroleum Lab Tech

Title Research; Sovereignty to present

Seismic Data Processing QC, Supervision and Management experience. International experience in Northa nd South America and Europe. Experience with artic data, high-resolution surveys heavy oil suveys, shallow water, TZ, and complex over-thrust data.

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out