Resume - Electrical / Instrument Inspector

Misco Jobs

Resume #54175

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
A. PERSONAL DETAIL

Name: Yani Handra
Place / Date of Birth: Duri, 4 February 1966
Sex: Male
Marital Status: Married (2 Children)
Healthy: Excellent

B. EDUCATION BACKGROUND

1. Primary School: SDN 2 Caltex Duri – Riau 1979
2. Secondary School: SMPN 1 Caltex Duri – Riau 1982
3. Senior High School: SMAN 1 Caltex Duri – Riau 1985
4. Engineer Certificate: University in Bandung – west Java
(Graduated Of Technical Division) 1993
Electrical Degree.

C. SKILLS

1. Knowledge about Electrical Principles.
2. Operating Personal Computer.
3. Speak and Write English.

D. WORK EXPERIENCES

Engineering Abilities: To manage the electrical installation project Electrical Industry; Refinary, Mining and Combine Cycle work on site, Field Design Electrical System pre-commissioning installation. Supervise Installation of High voltage equipment for Switchyard, Transmission line and, Substation. Medium and low voltage Switch gear, Circuit Breakers and MCC with controls and relays system.
QA/QC Abilities: QA/QC Documentation, Electrical Specification and Installation to commissioning Procedures. Inspection and testing all electrical equipment in accordance to assist in updating Operations Function codes, standards and procedure are ANSI (American National Standard Institute), NEC (National Electrical Code), NEMA (National Electrical Manufactures Association).
AMBITIOUS:
An ambitious and experienced electrical engineer with significant industry knowledge gained via management team, coordination with supervision of various projects Off-Shore, On-Shore and Construction. Pursue a career that that will provide a rule of:
- E & I Inspection
- Construction Manager
- QA/ QC manager

PROFESIONAL EXPERIENCES (1992 – 2007)
I have 15 (Fifteen) years of Experience as Electrical System, Maintenance Service and Construction – Plant for Petrochemical, Nickel/ gold Mining, Oil and Gas, On-Shore & Off- Shore.
D.14 British Petroleum Tangguh GPF Project
Designation: QA/QC E&I Construction Engineer
Job Location: Guna Nusa Fabricator Cilegon
Project name: BP Tangguh GPF Project (Construct & Installation Two Platforms)
Present: 2006 – 2007…

D.13 Tripatra/Fluor Chevron – Duri.
Designation: SLN Construction Superintendent
Job Location: Chevron Duri (Oil & Gas)
Project name: Flexible Project Management
Present: October. 2006 – Dec'26. 2006
D.12 Combine Cycle Gas Turbine Suban Pahse 2 Gas Plan Project
Designated: Pre-Commissioning & Commissioning And Facility Acceptance Coordinator.
Reason for leaving: Completion of Contract (4 Feb'2004 – Sept' 2006 ).

P.T Thiess Contractors Indonesia/ Conoco Phillips.
Expansion to an existing gas production facility.
DUTIES AND RESPONSIBILITY
Consist of review of quotations from the vendor and conduct T.B.E technical Bid Evaluations. Witness F.A.T and at the conclusion of site installation conduct S.A.T.
Source calibration equipment for site process instrumentation and personnel.
My team consists of one site Instrument Engineer and one site Electrical engineer along with a crew of 70 personnel to carry out site installation and site acceptance tests by means of a Quality Controlled hand over system to the client.
I then had the over all responsibility of supervising other Engineers in the Mechanical and Piping fields to full fill engineering interface between the client and the J.V partner Hyundai Engineering. Cleared all punch lists.
D. 11 Construction Service CHEVRON Project 2004
Thiess Contractors Indonesia

Designated: Estimator Engineer and Monitoring E/I Construction Activities
Job Location: Caltex Construction Service Duri Project, Oil and Gas
Present: February. 2004 – March. 2006

DUTIES AND RESPONSIBILITY
Handling some of electrical & instrumentation, civil work and mechanical work order incoming from Client ( Chevron Pacific Indonesia) to estimate / Calculate and negotiate. To conduct Kick of meeting Work Order Approved between Client and THIESS Contractor C/W Construction Teams. Witness F.A.T and at the conclusion of site installation conduct S.A.T. Organize and supervise Electrical & Instrument construction activities, quality, testing, documentation, Pre-commissioning, commissioning and start-up.
D. 10 Aberdeen Off-shore oil and Gas Industry in Europe (France) Shell
Power Generator System Installation' 2003
Designated: Operating Engineer - Electrical Inspector Eng. (QA/QC)
Job Location: North East of Aberdeen (Shell Oil Company – Aggreko).
Reason for leaving: completion of project (July 24' 02 – Jun' 03 ).

DUTIES AND RESPONSIBILITY
Full Inspected and monitoring Portable Power Plant Installation, Diesel Power Generator Systems (300 KW / 200 MW) Multi Voltage /50Hz/ 60Hz and Load Banks Precision testing for Both Resistive/ Reactive Loads (2.5 Mw – 100 Mw).
Perform routine inspection and document result in accordance with approved Project Owner procedures. Etc
D.09 PT. Caltex Pacific Indonesia Steam Flood project
Designated: QA/QC – Electrical Inspector/ Engineering
(Pre-commissioning and Commissioning) Owner Representative
Job Location: Central Gathering Station – 10. Duri Project.
Oil & Gas Facilities – Sumatra.
Reason for leaving: Completion of project. (September. 04' 00 – September. 2001

Combine Cycle & Gathering System Project: Coordinated construction activities 3 x 100 MW Siemens Westinghouse combustion turbines 501D.
Controlled daily activities of the sub-contractor PT. Siemens Indonesia on schedule requirement and engineering interface. Respond to (RFI) request for information and worked with engineering in Head Office.
In addition to my task of completing electrical system for hand over, I controlled the following: E & I, millwright, Building's, and Painting. Compiled all check sheets, involved with pre commissioning, commissioning and start up achieved contractual acceptance of plant hand over by the client.

DUTIES AND RESPONSIBILITY
1. QA/QC documentation and review Contractor construction electrical procedures.
2. Supervise and Monitor Installation of Cable, Cable tray, Lighting, Distribution control panel, all electrical equipment and Grounding system, etc.
3. Perform routine inspection and document result in accordance with approved CPI procedures.
4. Monitor activities of supervision contractor and construction Contractors.
5. Witness and verify Continuity, Merger, HI-POT and Component testing for Medium Voltage & Low Voltage equipment.
6. Monitor Quality control on construction progress activities.
7. Responsible from equipment installation and continue energizing of electrical equipment to pre-commissioning and commissioning.
8. Issued punch listing for out standing works.
9. Review Tested documentation, witness and accept all required Testing for CPI (Client).
10. Etc
D.8 Middle East UAE. Oil Refinery & Power Generation Plant
Designated: Electrical Maintenance Eng.
Job Location: Al – Mubaraz island – Abu Dhabi Oil & Gas Company (A D O C)
Abu Dhabi – GULF (UAE).
Reason for Leaving: Completion of Contract. (Augustus'04' 99 – April. 04' 00).
DUTIES AND RESPONSIBILITY
Maintenance and operational of plant facilities. Turbine generator power supply to Transformer, and than going to switch gear, from switch gear going to ALL WELL HEADS Platform / Central Platform, MCC, Distribution Panel, Motor Electric Over Hauls, Lighting and lighting Panels Distribution, all Electrical Equipment and Modification.
D.7 Newmont Gold Mining (COMBINE CYCLE) Project
Designated: Field Engineer Electrical and Quality Control Engineer
Job Location: PT. Flour Daniel – Sumbawa Batu Hijau Project (Power Plan &
Gold Mining) New-Mont Nusa Tenggara.
Reason for Leaving: Completion of Project. (October 1998 – July'30. 99)

Power Facility Portion of Batu of Batu Hijau Four (4) 28 MW Coal Unit and Nine (9) Diesel Generator Units, and a 150 KV Transmission Line. Project Cost US $ 1.8 Billion.
Combine Cycle Project ( Coal Power House & Diesel Generator)
DUKE FLOUR DANIEL INDONESIA
Coordinated all construction activities on a diesel powered power plant. (Associated Switch Yard 11 KV-150 KV).
Phase two of the contract, coal-fired power plant with four turbines. Responsible for electrical trades
With Electrical speciallist Commissioning bringing total to a round 25 personnel.
Controlled all QA/QC documentation. Involved with commissioning team for client hand over, and acceptance.
DUTIES AND RESPONSIBILTY
1. Manage the electrical Contractors daily construction activities, schedule and progress.
2. QA/QC documentation and specification and verify, contractor procedures.
3. Generate Field Change Request (FCR), Field Purchase Request (FPR) and Request for Information (RFI). Inspect and approve Electrical Installation on site.
4. Witness and verify Continuity, Merger, HI-POT and component testing for Medium voltage & Low voltage equipment.
5. Inspection of Connection and Installation switch gear and MCC panel.
6. Expedite materials for construction and issue field instruction to contractor.
7. Supervise and Inspect Subcontractor (SIEMENS) construction activities.
8. Witness Pre commissioning and commissioning testing.
9. Review all test packages; prepare QA/QC documentation for Turn over to client.

D.6 INCO Nickel Mining Project Daniel
Designated: QA/QC - E/I Engineer.
Job Location: PT. SNEF/ Fluor Daniel – Soroako, PT. Inco Expansion Project
(Soroako South Sulawesi) (Feb 1998 – Oct 1998).
Reason for Leaving: Completion of Project 1998 – Certificate.

DUTIES AND RESPONSIBILITY
1. Responsible for project operational safety requirement
2. QA/QC documentation and review contractor installation procedures.
3. Implement & enforce all company policies, procedures and practices.
4. Planing construction electrical and Instrumentation schedule.
5. Monitor construction activities and progress.
6. Witness and monitor electrical and Instrumentation equipment testing.
7. Responsible for test packages documentation from pre-commissioning to final hand over to client.
D. 5 UNOCAL' 76 Combine Cycle Project Unit # 4. 5. 6
Designated: Electrical Engineer for Start-up to Commissioning/ Owner Represent.
Job location: Unocal Salak Geothermal Project Unit # 4,5,6 (West Java)
Reason for Leaving: Completion of project (1998) / Certificate.

DUTIES AND RESPONSIBILITY
1. Perform evaluation and recommendation for power generation project electrical operation system start-up to commissioning acceptance.
2. Assigned as Commissioning Electrical Engineer. Trouble shooting, maintenance for power plant and distribution during shut-down Unit # 4,5,6 and MCC panel and local panel for lighting Power Generation Facility Area and-Resource Production Facility Area.
3. Responsibility too for cleaning ISO-phase Bus Duck and prepared, termination element Space heater and confirmation main transformer. Install and link grounding clutiss on generator out put for Turbine Generator Unit # 4, 5, 6.
4. Inspected and Cleaned Unit # 400, 500, 600 Lube oil Clarifier Heaters.
5. Verify Drawing & specification of Electrical Equipment.
6. QA/QC Electrical Documentation.
7. Verify Punch listing for all Electrical works prior to final acceptance.
8. Planed schedule for electrical start-up, cables modification, installation and other construction activities.
D.4 AMOCO Petrochemical Project
Designated: QA/QC. Electrical Engineer
Job Location: Merak – PTA 1 AMOCO Petrochemical Plant Project
Cilegon – West – Java / PT. IKPT – CHIYODA – J/O
Reason for Leaving: Project Completion (1997) – Certificate.
DUTIES AND RESPONSIBILITY
1. Supervise and Monitor Installation of Cable, cable tray, Lighting, Distribution control panel, electrical equipment and Grounding system, etc
2. Prepare and Verify construction Drawing, Specification and installation procedures of Electrical Equipment.
3. Supervise & Inspection of electrical equipment Installation, testing to - commissioning.
4. Witness cable termination for Medium and Low voltage Power to Switch Gear, MCC, MV/LV electrical Motor.
5. Responsible to QA/QC and Construction Managers.

D.3 Unocal'76 Geothermal power Generator Project Unit # 4, 5, 6.
Designated: Field Engineer / Engineering Dept.
Job Location: Salak Geothermal Project (West Java)
Fluor Daniel JO IKPT.
Reason for Leaving: Contract Completion (1996 – 1997) – Certificate.
Combine Cycle Geothermal Power Generation
Directed construction activities on caterpillar generators series 3512.
Controlled all QA/CC documentation pre commissioning, commissioning and start up.
I controlled a very small and dedicated local craft force to achieve start up in a very isolated and troubled province.
We achieved start up on schedule and I trained local staff to switch over to maintenance duties.
DUTIES AND RESPONSIBILITY
1. Verify all Drawings and Specification of Electrical and Instrument.
2. Support the project program for verifying construction quality.
3. Supervision and Inspection to Subcontractor in construction Activity Installation and Hook-Up some Instrument Equipment and Planning Installation Electrical Motor Connection, Power Supply and Compressor.
4. Handling RFI from Subcontractor and Connected all Paper Work
5. Reporting to Engineering Manager.

D.2 Mivan Apartment Project.
Designated: QA/QC – Electrical Engineer.
Job location: Dukuh Golf Apartment Project, Kemayoran,
Jakarta Utara
Leaving for Job: Completion Project (1995 – 1996) - Certificate.

DUTIES AND RESPONBILITY
1. Verify Drawing, Specification and Equipment.
2. Inspection of connection pooller and control cables.
3. Supervisor of Installation cable Tray, Lighting and Light distribution panels.
4. Direct Medium Voltage & Low Voltage Equipment testing (continuity, Megger test and HI-pot test. (Feeder, pncc & swgr panels).
5. Prepare document & record or documentation for turn over package)

D.1 Unocal Power Generation Project Unit # 123.
Designated: Unocal Electrical and Instrument Supervision.
Job Location: Gunung Salak Geothermal Plant Project Unit – 1,2,3, (West –
Java) UNOCAL' 76.
Reason for Leaving: Complete Project (1993) – Certificate.

DUTIES AND RESPOSIBILITY
1. Supervise to Subcontractor in Construction Activity Installation in Hook up all Instruments on general Electric (Gas Turbine) Ingersoll (Condensate Pump) and Installation such (Installation Cable Tray). CCS (Compressor Anti Surge Control), PLC.
2. Control all Drawing & Specification of electrical and Instrument.
3. Supervises of Connection all Electrical Motor, Blacke Dur (welding Procedure Specification) Bailey Controls (West Pump Station) Pneumatic Products (Installation Operation & Maintenance).
4. Inspection & Check for Pre Commissioning & Commissioning.
5. Report to Construction Manager

THIS CERTIFY, IS TRULY AND CORRECT.

YANI HANDRA
Electrical Engineer

Please enter brief description of your skills and qualifications.
Eletrical & Instrument Inspector

1. Knowledge about Electrical Principles.
2. Operating Personal Computer.
3. Speak and Write English.

Please describe in your own words, what you are expecting from the job and/or the company.
AMBITIOUS:
An ambitious and experienced electrical engineer with significant industry knowledge gained via management team, coordination with supervision of various projects Off-Shore, On-Shore and Construction. Pursue a career that that will provide a rule of:
- E & I Inspection
- Construction Manager
- QA/ QC manager

WORK EXPERIENCE:

D. WORK EXPERIENCES

Engineering Abilities: To manage the electrical installation project Electrical Industry; Refinary, Mining and Combine Cycle work on site, Field Design Electrical System pre-commissioning installation. Supervise Installation of High voltage equipment for Switchyard, Transmission line and, Substation. Medium and low voltage Switch gear, Circuit Breakers and MCC with controls and relays system.
QA/QC Abilities: QA/QC Documentation, Electrical Specification and Installation to commissioning Procedures. Inspection and testing all electrical equipment in accordance to assist in updating Operations Function codes, standards and procedure are ANSI (American National Standard Institute), NEC (National Electrical Code), NEMA (National Electrical Manufactures Association).

Please detail your work history including past employers, employment dates, position held, responsibilities, and major achievements.

Present,
British Petroleum Tangguh GPF Project
Designation: QA/QC E&I Construction Engineer
Job Location: Guna Nusa Fabricator Cilegon
Project name: BP Tangguh GPF Project (Construct & Installation Two Platforms)
Present: 2006 – 2007…

EDUCATION & CERTIFICATION:
Electrical Degree

List any formal education including schools, degrees attained, and performance. Also include professional affiliations or associations, certifications you have earned, special licenses, etc.
B. EDUCATION BACKGROUND

1. Primary School: SDN 2 Caltex Duri – Riau 1979
2. Secondary School: SMPN 1 Caltex Duri – Riau 1982
3. Senior High School: SMAN 1 Caltex Duri – Riau 1985
4. Engineer Certificate: University in Bandung – west Java
(Graduated Of Technical Division) 1993
Electrical Degree.

ADDITIONAL INFORMATION:
I am Indonesian
Provide any additional information including your personality, hobbies, references, citizenship, etc.
SPORT

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1522)

Go to Search Parameters...

Brief Description

To obtain long-term employment with an organization that will allow me to utilize my sales, management, and organizational skills in order to achieve company objectives. An honest approach that has resulted in exceeding set goals in the petroleum industry for the past 22 years.

Environmental professional with a solid background and experience in environmental projects and permits under CERCLA, RCRA, OSHA, FERC, NESHAP, CAA, and CWA regulations. A highly motivated project manager and effective communicator.

Chemical Engineer with 15 years of Safety, Environmental, & Transportation regulatory experience in oil, gas processing, chemical distribution, and trucking industries, including design, construction, operations and policy and procedure development compliant with regulatory requirements.

Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering

Geologist graduated at University of La Plata, Argentina. Mudlogger at Exlog, data Engineer at Exlog/Baker Hughes Inteq, Argentina. Mudlogging Coordinator at Baker Hughes Inteq, Argentina. Ops. Manager at Datalog, Argentina. Wellsite Geologist in Argentina and Venezuela.

Working with Geophysical Data Acquisition Group and have more than six years of insightful experience in the field of 2D/3D offshore & onshore seismic data acquisition in Indian and International exploration acreages.

Since 2004 I have been employed at Frontken (S) Pte Ltd in various Inspection and Supervisory positions in the field of protective coatings – including powder coating, painting and thermal spray coating. I have hands-on experience in thermal spray coating and painting application.

I have worked as Process gas anlalyzer come inst.tech. currently working as H2S safety consulyant.

Security specialist

Certified Lead Auditor in ISO9001 and coversant with 14001, Trainer of ISO QMS, Plastic Technologist and expert in Quality Control of entire production, In-charge of resolving customer complaints and overall expertise in devoloping new furniture and engineering plastic products

I am Chemical engineer backed by MBA with 15 years of proven track record in the field of marketing & sales of specialty chemicals to wide range of industries. I have worked for & trained with some of the largest multinational chemical companies.

Twenty-two years in geologic research and preparation of reports on coal and coalbed methane resources in Virginia. Experienced geologic mapper. Microsoft Programs, Earth Vision, Arcview GIS 3.2, ARC/INFO, SPSS, and Adobe PageMaker. published.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

Safety Manager/HSE/ Safety Specialist

Laboratory Chemist: Main SKill Set: GC Analysis, Drilling Fluid Analysis & Production Chemistry. Supervisory Experience (4 yrs). Additional Training: Swagelok, ISSOW & Fastforward Management Cert.

Provide customer service / interface services. Logistics, material chain facilitator, customs, local contract administration, housing, transportation, liaison

_ Geoscientist having five years of E&P industry experience.

I am a decisive professional who is comfortable with high expectations, long hours and tight schedules. I have appreciation and respect for my colleagues and have always enjoyed the same in return. I have an excellent work ethic and enjoy the challenges of multi-tasking in a fast paced environment

i have nineteen years more in Cad Drafting Mechanical and Electrical Drawing

9 years of experience in Inspection, Welding, and Destructive, Non ¡V Destructive Testing, Calibration, etc.

Knowledge of SAP, Commerce Graduate and around 16 years experience Total, Worked in Logistics and Warehousing.

Material Controller/Inventory Controller/ Crib Attendant/ Machine Operator

Seeking a challenging position as a Software Developer, specializing in Microsoft technology. 9 years of working experience in C++, C, XML-RPC, HTML, Windows, vxWorks, Solaris and Linux.

Automation, Instrument and Control Engineer Manager

DEVELOPMENT GEOLOGIST with proven experience in petroleum industry having worked with a national oil company in India for 6 years. Well conversant with Development Geology discipline, Sub-Surface Team roles and expertise and Well Log anaysis and Well site operations.

12 years of expereience in medical emergencies,7 years expereience as offshore rig medic, 2 years as trainee HSE

fabricator, erector, welder, knowledge in drawing and 14 years experience in gulf.

To secure a sales position in a team environment with a progressive leader in your industry where I can participate and satisfy the goals of the company.

I have been an HSE Supervisor for the past twenty (20) years for local and overseas. All inquiries have been incorporated in my own curriculum vitae.

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

For over 15 years, I have worked in various oil companies throughout the world. As such, I have possessed expert level skills in testing and analysis of petroleum related products, including oil, gas, water, boilers and environmental samples using sophisticated analytical equipment.

Geoframe data loading (2d,3d, well data), Geoquest software support (Charisma, CPS, and Finder), Project management, Unix Environment.

Project Management and Processes; PRINCE2 Methodology and Processes; Microsoft Project; Microsoft SharePoint Technologies; Design and Architecture; Migration Projects (2003 to 2007); Branding and Customization (Masterpage); Site and Lists Definitions

Procurement Engineer with 15 years experience in the field of Procurement / Materials Management for Oil / Gas / Power / Petroleum Refining seeking a mid level managerial assignment to contribute in achieving organizational goals and targets.

During successful career with Mobil Oil and Bechtel Corp, developed expertise in technical and management functions for stateside and offshore supply chain projects ranging from $150 million to $3.5 billion.

Electrical / Instrument Inspector

Bioinformatician and clinician

Truck Push/ Rig Move Supervisor - 16 Years Oilfield experience.

Seeking middle level managerial assignments in the domain of Procurement / Materials Management to excel with organization of repute.

IT with expertise in systems business analysis, database management, ERP implementation & support

I did my Master in Environmental Science from university of Karachi Pakistan and having five years experince in relevant field in Oil & Gas sector. I am holder of HSE passport and worked for many international organization.

28 years in the engineering contracting, industry with experience mainly in the Materials and Management engineering field, for projects in the oil, gas, petrochemical and mining sectors.

I am enclosing a copy of my resume in hopes you will consider me for a Petrophysicist position with your company. I believe that my petroleum engineering, petrophysical interpretation, and reservoir characterization background are a good fit for the qualifications needed the petrophysicist position

Experienced Managment support as commercial manager,contract administration

GIS Analyst Oracle, ArcSDE, ArcGIS, Linux Knowledge with 4+ Yrs of Experience in GIS Domen

I have a strong background in tank repair and alteration.

30 yrs commercial experience in upstream petroleum; Tenneco Oil commercial manager Gulf of Mexico; Co-founder of Newfield Exploration (NYSE: NFX); Consultant to domestic, international, and national oil companies; BS geology MA business; excellent Excel/Monte Carlo project finance evaluations

B.Sc. Degree in Electronic Instrumentation and Physics – Mumbai University.• Diploma in Material & Business Management. Diploma in Computer Application and System analysis i.e. M.S.OFFICE,OUT LOOK,SAP PROGRAM

I am an Unlimited Oceangoing Master with more than 15 years experience as Captain, ten of which are on Offshore Support Vessels.

instrumentation technician ( matriculation + diploma in an instrumentation)

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out