Resume - International analytical chemist, expert in gas chromatography and continuous em...

Misco Jobs

Resume #71599

CONTACT INFORMATION:
If you don"t see contact information, please log in first.

Summary

Active DoD security clearance beginning 2006, current US passport, and U.S. Navy veteran. Accomplished Analytical Chemist in leadership role with 22 years of domestic and international experience at refineries, chemical agent destruction facilities, and environmental remediation sites. Priority and urgency driven with a successful record of scientific performance. Expert in gas chromatography and continuous emission monitoring with an emphasis on the analysis of chemical agents and explosives, refinery and natural gases, and raw and finished petroleum products. Manufacturer training on theThermo Fisher TSQ Quantum Access Triple Quadrupole LCMS. Strong mechanical aptitude with excellent trouble-shooting and information technology skills. Solid competency in verbal and written communications that include the creation of and contribution to the preparation of technical papers and Standard Operating Procedures.

Work Experience

Noblis (previously Mitretek Systems), Senior Staff 2005-Present
Falls Church, VA
Analytical chemist and technical lead providing operational support at an OCONUS site. Eliminated an unnecessarily complex process and introduced a standard one that dramatically improved efficiency and productivity, and modified a flawed technique to produce reliable data. Evaluated neat chemical agent management plans and interpreted construction regulations for the new US Army Medical Research Institute for Chemical Defense (USAMRICD) at Edgewood MD. Reviewed chemical agent processing and monitoring plans for ACWA Bluegrass and Pueblo Chemical Agent Pilot Plants (BGCAPP and PCAPP). Evaluated decontamination processes and recommended changes to improve performance and mitigate out of control conditions for the NSCMP Ton Container Decontamination Facility (TCDF) and Ton Container Cut and Clean Facility (TCCCF). Collaborated on an updated review of reactive coating technologies for self-decontamination of chemical and biological warfare agents.

Geomet Technologies, Senior Chemist 2002-2005
Gaithersburg, MD
Technical Lead and Project Manager for $700K analytical instrument support effort at Kobe Steel's chemical warfare remediation sites at Samukawa and Kanda, Japan. Saved Geomet $26K in equipment sales to client. Laboratory Manager and Lead Air Monitoring Chemist for the Mobile Analytical Support Platform (MASP) used to support the Rapid Response System (RRS) operations at Fort Richardson, Anchorage AK. Completed network upgrades to mass spectrometers and ancillary equipment, reviewed and modified analytical procedures, and organized MASP activities for routine analyses of air and waste samples using GC/MS, Minicams, other instrumentation, and wet chemical methods. Thermo Fisher TSQ Quantum Access Triple Quadrupole LCMS training.

Separation Systems, Petroleum Application Chemist 1997-2000
Gulf Breeze, Florida
Designed, modified, constructed, and tested complex, multi-dimensional Agilent 6890 gas chromatographs equipped with FID, TCD, and Sievers SCD and proprietary software for analysis and characterization of crude oils, natural gases/liquids, finished gasoline, chemical intermediates, feedstock, and refinery gases using prescribed ASTM and GPA methods. Analysis experience includes Refinery Gas Analysis of compressed gases and liquids to C20; Simulated Distillation per ASTM-D2887; simultaneous analysis of permanent gases and C1-C6 saturated and unsaturated hydrocarbons; Benzene and Toluene in Gasoline per ASTM D-3606; Alumina plot column analysis of C1-C8 Hydrocarbons; determination of C1 to C4 Alcohols and MTBE in Gasoline per ASTM D-4815; determination of RON and MON by PIANO analysis of finished gasoline; and chromatographic determination of heating value and %Sulfur. Installed analytical instruments and trained laboratory personnel at refineries and research centers in the US, South America, Mexico, Canada, and Korea. Completed analysis requests and testing in support of research and sales, attended technical conferences for sales support and presentations, and responded to customer application, repair, maintenance, and trouble-shooting inquiries.

USEPA Gulf Ecology Division, Analytical Laboratory Manager 1994-1997
Gulf Breeze, Florida
Working as a contractor to the USEPA with Avanti Corporation, reorganized a deteriorating laboratory to eliminate a 3-year backlog of analysis requests. Analyzed estuarine water, sediment, and tissue in support of USEPA toxicological research and monitoring of OC and OP pesticides, PCBs, semi volatiles by Method 8270, and metals by ICP, mercury by CVAA, plus automated GPC sample preparation. Connected, expanded, and standardized PCs running HP terminal emulation software, spreadsheet, and word processing software for data collection, reduction, and reporting. Wrote SOPs, implemented QA/QC, and began routine reporting schemes to EPA containing data summaries, method descriptions, references, and electronic data.

Midwest Research Institute, Staff Chemist 1990-1994
Kansas City, Missouri
Responsible for CEM and GC projects at hazardous waste facilities, refineries, chemical and industrial processors, and incinerators, including gathering and interpreting data; project management encompassing both technical and administrative/budgetary functions; preparation of reports and proposals for clients; and selection, design, and evaluation of associated resources. Implemented hardware and software changes to the Continuous Emission Monitoring system that integrated standardized data collection, reduction, and reporting. Identified, investigated, and evaluated new applications of analytical techniques (Fast GC, CEM, FTIR, and IMS) to characterize organic emissions from stationary sources.

CH2M Hill, Analytical Chemist 1988-1990
Montgomery, Alabama
Operated and maintained Finnegan 4000, 4500, and 5100 floor model mass spectrometers equipped with SuperIncos software used for USDWA and SW-846 analysis of VOCs, SVOCs, chlorinated pesticides and PCBs in water and soil. Also completed analysis of chlorinated phenols and PAHs by GC-FID, and THMs, EDB, and chlorinated pesticides by GC-ECD.

Chemical Waste Management 1985-1988
Emelle, Alabama
Operated and maintained gas chromatographs and other ancillary equipment for the characterization of hazardous material for disposal at the largest hazardous waste disposal site in the country.

Education

BS Chemistry, 1985 Florida State University

Graduate Student in Computer Science University of West Florida
CS graduate student from August 2000 to December 2001, 3.1 GPA. Completed courses in software engineering, C++ and Data Structures, Discrete Math, operating systems, microprocessors, and database management using SQL.

Cisco Certified Network Apprentice (CCNA) Pensacola Junior College
Completed four semesters in an accelerated program concurrent with graduate classes at UWF, GPA 4.0

C Programming Series Certificate, University of Alabama in Huntsville
* Fundamentals of C: Basics of program development using C syntax and structure. Data definitions, file IO, functions, and generic algorithm implementation.
* Fundamentals of C++: Understanding of object-oriented programming on the latest compilers and systems. Practical experience designing and using classes and objects effectively in classroom examples.
* Visual C++ for the Windows OS: Introduction to the Visual C++ development system and use of the Microsoft Foundation Classes (MFC).

Presentations and Papers

"Parameters for the Evaluation of the Fate, Transport, and Environmental Impacts of Chemical Warfare Agents in Marine Environments" (Submitted to ACS, "Chemical Reviews" for publication) Mitretek Systems, January 2007. Bizzigotti, Castelly, Hafez, Smith, and Whitmire

"Characterization of Selected Ton Containers Decontaminated at the Pine Bluff Ton Container Decontamination Facility, Chemical Analysis of TC Solids, Wipe Samples, and Air Samples" prepared for Edgewood Chemical and Biological Center, Aberdeen MD by Mitretek Systems, February 2006. Cutler, Faramarzi, McDonald, and Whitmire

"Cut and Characterize Sampling and Analysis Plan (CCSAP) for Ten Ton Containers delivered to APG-EA from PBTCDF" prepared for Edgewood Chemical and Biological Center, Aberdeen MD by Mitretek Systems, October 2005.

"Pine Bluff Ton Container Decontamination Facility, an Evaluation of the Decontamination Process." prepared for Edgewood Chemical and Biological Center, Aberdeen MD by Mitretek Systems, June 2005. Baker, Cutler, Faramarzi, Hafez, McDonald, Star, and Whitmire

"Accelerated Detailed Hydrocarbon Analysis using Hydrogen Carrier", presented at the Gulf Coast Conference, Galveston TX Sept 1999

"Extended D2887 Simulated Distillation: Column Selection and Practical Application", presented at the Gulf Coast Conference, Galveston TX Sept 1998

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1352)

Go to Search Parameters...

Brief Description

can apply any job which you think I am fitting for

25 years industry experience, • Wellsite geological experience in carbonate, Clastic, and complex Trustbelt plays, • Well experience includes; onshore, offshore, horizontal development, underbalanced, and HTHP drilling operations

Welder Tig Mig Mag Arc welding wet welding under water diver 5G 6G 6GR

I have 6 + years offshore experience as Offshore Logistics, materials, Cost control and Planning.

Free! International analytical chemist, expert in gas chromatography and continuous emission monitoring with an emphasis on the analysis of chemical agents and explosives, refinery and natural gases, and raw and finished petroleum products.

Analyze and perform petrophysical evaluation, reservoir characterization, volumetric reserve estimation and economic feasibility of new exploration blocks as well as carry out sequence stratigraphic modeling of reservoirs in order to provide geological backup services to Reservoir Engineers

See below.

I’m a Geoscientist with over 5 years of experience in the areas of: Seismic Exploration and Operations and Subsurface Geology in the field of Oil and Gas Exploration. I have master’s degree in Geophysics (Seismology) and Bachelor’s degree in Geology.

I am a Safety Person with 6 years experience in the field. I am currently pursuing my NEBOSH General Diploma in Occupational Safety and Health

Senior Telecoms Technician, radio, satellite, rigger, cisco, networking, cabling, management, hf, vhf, uhf, microwave, tracking, it skills, wireless

I have completed my intermediate and do have excellent communication skills ,convencin skills,i am looking for a job for which I can word hard and help in the develpment of the organisation, and also work happly.

M Tech with 10 years exp in Instrumentation& Control field of Fertilisers, Utilities and Power

Good experience in the field of computer works by using operating, installation and

Currently employed through Nabors Drilling as Motorhand. Previous experience as Derrick hand, rough neck, and lease hand. H2S ticket through Pitts, Nisku Alberta. Presently studying for my first line ticket.

Dear Sir / Madam, As you will see I am currently undertaking courses in Computer Networking, which works towards the Microsoft Certified Systems Engineer, also I have previous experience of working offshore in the UK and overseas.

I graduated with a Masters of Geology (2:1) from the University of Leicester in 2006. Since graduating I have worked as a drilling engineer in Oman and am currently working for the University of Leicester and the Diamond Trading Company and am producing a graduate certificate for them.

I hold a JD as well as an MBA in finance and have been a land manager for mining companies for the last 10 years. I am very well trained at acquisition, due diligence, negotiation, sales, entitlement, permitting and construction techiques. I have excellent references.

Construction & maintenace of installations, equipment and systems in hazardous areas (explosive gas atmosph.); Maintenance of el. equipment, installations in petrochemical industry.& el. Equip., systems in El.Power Plant ; Training el.personnel for preventive & predictive el. maintenace programs

Pipeline Integrity Engineer with over 10 years of experience and expertise in pipeline and asset integrity management, pipeline inspection, MFL technology, corrosion diagnostics, pipeline integrity assessments, pipeline integrity program development, and project management.

M,TECH-instrumentation& control- 1 division, B.TECH-electronics & instrumentation -1st division

Please Look closely at my Resume I am in Dire need of a job and will relocate immediately for a job.

job in geology

8 yrs experience in oil and gas industry, looking to start career in offshore or allied industry, available immediately

Coiled Tubing Supervisor

B. Sc. - Dissertation in Polymetallic Ore

I am a power plant proffessional having more than 16 years operation experience in various field of plant like errection, commissioning, steam blowing, alkali boilout and chemical cleaning of boiler and lines, trouble shooting in Boiler/steam turbine/gas turbine and other power plant auxiliary.

Accounting

5 years experience of project document management with both Vendor & Design Document Control experiences. Considerable overseas work experience in Onshore & Offshore documentation, records co-ordination and archive practice including multi-discipline in the oil/gas industry. Knowledge of IDMS, EDMS.

Vertical and horizontal drilling and management of crew through West Texas and East New Mexico for a major oil exploration company. Ensurance of safe, productive work to optimize production. Supervise all rig activity on single rigs, performing vertical and directional drilling.

Enterprise Asset Management Consultant in Oil & Gas Industries

Free! Project Information Management / Project Services; B. E. (Mech Engg), Post Grad Diploma in Systems Management,, Chartered Engineer (India), 20+ years in Project Engineering/Management in various industries; Executed projects for various international clients; Managed vendors globally

1+ years Petroleum Landman. Experienced in running full mineral ownership reports in Kansas and Oklahoma. Proficient in Microsoft Excel and Microsoft Word.

Projectmanager process watertreatment wastewater water biofuels bio fuels plantengineering plant engineering engineer claimmanagement commissioning basicengineering, detailengineering sitemanager tendering scheduling calculation

Master in chemistry with 2 years experience in quality control and production department. Handled pant manufacturing company as shift in charge, done various seafood analysis and water quality analysis, knowledge in plant safety,

Multi Dsicpline Insepctor with working experience in both onshore and offshore fabrication/Installation/Hook-up

Dynamic, hands-on international oilfield operations Finance & Administration Manager

OBJECTIVE I am a dedicated worker looking for an opportunity for advancement. I am willing to go the extra mile to get the job done.

Construction Framer, demolition, mover, landscaping, OSHA certification, socilal worker

I am full time cartographer

Experience in QA/QC documentation procedures and processes in a petro-chemical plant construction set-up covering various disciplines i.e. civil, structural, mechanical, electrical and instrumentation. Monitor and ensure that all required documentations are followed as per approved project quality

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

Nineteen years of experience (Five year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Service Tecnician, Commercial Painter, Police Officer

My skills vary. I'm most comfortable using a computer and doing research. I took the Landman 101 course, which is the field I am most interested in pursuing.

Commercial truck driver, endorsement: passenger, doudle/triple trailer, hazardous materials, moffet forkt lift operator on rear flat bed trailer

Professional contract negotiator & administrator

11 Years of Experience in implementation of the General Safety of Employees, equipments & Work Permit System, Accident Investigation & analysis, Identification of actual & potential Safety Hazards in respect of Health, Safety & Environment, Carrying out project safety inspection, Job Safety Analysis

23 years in safety field in Petroleum Refineries, Petrochemical Plants, Pipeline Projects, Well Services, Wireline Operations, and Wastewater Treatment. 8 years with Safety Instructor tasks, 7 years in Construction Projects, 5 years with Q/A Q/C tasks, and 7 years in Managerial level

I am currently the ESP / VSD Supervisor for Encana-Ecuador in the Tarapoa field. I have extensive ESP experience with all lines of equipment and most lines of surface equipment.

Proven managerial skills combined with assertive personality sensitive to multi-cultural & multi-national environments.

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out