Resume - mechanical structure engineer

Misco Jobs

Resume #71807

CONTACT INFORMATION:
View contact information...

Age: 31
Marital status: Single

SKILLS SUMMARY:
- Mechanical engineer,
- Engineering calculations,
- 3D modeling skills (MSC Patran, Maestro Modeller, Genie Framework, Mechanical Desktop, AutoCAD),
- Use of FEM analysis in stress and self vibrations calculations (MSC Nastran).

PROFESSIONAL EXPERIENCE:

Present
Freelancer engineer. Conducted work:
Freelancer engineer (stress calculations). Conducted work:
- Stress calculation for conrod models in Abaqus ver 6.7-1.
- Stress calculation of engine mounting brackets in Abaqus ver 6.7-1.
- Thermo mechanical calculation of cylinder flame head in Abaqus ver 6.7-1.
- Use of Genie program (SESAM package) for frame check,
- Preparation of load cases for conducted analyses,
- Stress calculations for pipelines in CAESAR II (ver 4.5) according to ASME B31.3 standard,
Review of design for lifting appliances (stress evaluation) i.e.
- 100Te spreader bar,
- Rigitiser used for transportation,
- Chute handling system capacity 45Te, installed on board of vessel,
- Cable drums ~400Te gross including lifting arrangement,
- Offshore containers used for transportation and equipment handling i.e. valves (gross weight up to 25Te).

06/2004 - 10/2006
Mechanical engineer - numerical analysis specialist in Ship Design and Research Center.
Research and Development Department - Ship Structures Division.
Work in stress and vibrations calculation group.
- Build of FE models in MAESTRO Modeller,
- Structure evaluation with help of MG/DSA (stresses and adequacy parameters),
- Structural analysis of structure regions,
- Build of FE surface and solid models for purpose of analysis in MSC PATRAN,
- Global–local analysis for structure with MSC NASTRAN and MSC PATRAN,
- Application of boundary conditions and preparation of load cases for conducted analysis,
- Fatigue assessment for specified areas of analyzed structure including scallops (on level and two levels pod foundations, seating for equipment and crane installed on board) with kelp of MSC NASTRAN and MSC PATRAN,
- Build of model of in AutoSEA2 for prediction of acoustic response of ship in the area of machinery space for fast container ship and car ferry (model included ship conversion according customer's request),
- Vibration analysis of pod foundations and the hull, natural and enforced vibrations analysis (including induced pressure pulses applied for the hull),
- Thermal analysis for exhaust pipelines (MSC NASTRAN, MSC PATRAN),
- Noise level measurements (use of B-K meter) and assistance at vibrations measurements during ship trials on car carrier,
- Supervision of conducted projects - stress calculations for ship structure and equipment installed on board and other mechanical facilities. Use of FEM Method (MSC Nastran, MSC Patran, Maestro Modeller). Contacts with customer and preparation of reports from conducted analysis.
- Impact of Phase Lag Between Propeller Excitation Components on Vibration of a Podded Propulsion Vessel - T-POD'2006. The Second International Conference on Technological Advances in Podded Propulsion

06/2002-06/2004
Senior assistant of designer at PROJMORS Sp. z o.o.
- Creation of technical documentation in 2D – assembly and fabrication drawings.
Preparation of technical directions for collaborating design groups. Projects for marine industry
(quay installations pumping stations), Oil Refinery, NAFTOPORT – fuel base, NATO organization and Polish Army
- Execution of technical expertises.
- Continuous use of AutoCAD 2002i - 2D design and conduction of necessary engineering calculations with help of MathCAD6.0 software,
- Occasional use of 3D modeling software - Mechanical Desktop ver 6.0,
- Preparation of technical specifications for projects,
- Execution of fabrication improvements according to construction company remarks.
- Making inventory of technological installations on fuel jetties.
- Design of handling system for tetrapodes - 50 tons star shaped concrete blocks.
- Improvement of design for slipway used to repair small ships.
- Design of technology for container terminal in Gdansk for Day &
Johnson Ltd. (Great Britain).

08/2000-08/2001
Intern, engineering dept. Advanced Machine & Engineering Co (USA).
- Design of the machines: handling systems, measuring system for automated cutting line series 100 and 200 (blade saws) offered by the company.
- Work within different workgroups: Design & Build Group, Fixture
Group designing workholding fixtures for parts of the machines (i.e.
castings) requiring machining.
- Creation of assembly drawings mentioned above machines and detail drawings for parts (with help of CAD tools such as Mechanical Desktop
5 & 6, AutoCAD2000i).
- Debugging of designed machines and conduction of all the necessary engineering calculations for designs (MathCAD 6.0).
- Supervision of assembly process designed machines and check of quality of made parts.
- Preparation of reports for customer containing description of work improvement in assembly of machines.

QUALIFICATIONS:
- Master of Science in Mechanical Engineering. Technical University of Gdansk. Marked out for very good marks archived during study. Graduated 2000.
- Languages: English (very good),
- A Level Exam (Polish, English, Mathematics, and Physics) passed with very good marks.
- FEM analysis in MAESTRO Modeler 8.1, MSC PATRAN, NASTRAN and Genie.
- Trained for API 579.
- Driver's license.

PERSONNEL ATTRIBUTES:
- Self motivated,
- Efficient in looking for solutions,
- Team player,
- Reliable.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1352)

Go to Search Parameters...

Brief Description

Smart worker, fast learner and also having hard working ethos with strong desire to succeed. I have good communication and presentation skill. I developed the ability to take responsibilities and accustomed to work under pressure. I am goal-oriented and self-motivated.

WORK PROFILE

20 years+ Metal Polisher, Bricklayers Labourer, Mining Professional (Plant Operator) in gold Mine

Ability to conduct legal research in natural resource and aboriginal law

I am a highly motivated and ambitious Senior Electrical Engineer who worked in Emirate , Saudi Arabia , Kuwait , Iraq & Lebanon since 1994 and interested to pursue my future professional career in your company. The scope of work I am looking for is a job in the field of Residential Industry ,

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

Account Management - International Department

MSc Engineering / Business Development / Project Management /Energy field/ Gas&Oil/Power/Heat Transfer/Cooling Condesing Plant/

A Senior Financial, Systems and Accounting Manager with significant experience in the development, creation and management of accounting and reporting systems gained both internationally and domestically. Have worked in the United States and the United Kingdom for Citibank, Xerox, Yale, Louis Dreyf

I am a geophysicist with a Ph.D. in Applied Science/Applied Physics. I am seeking a job in the oil/gas/mining industry. I have experience with GPR, seismology, computer modeling and C/C++ computer programming. I am a permanent U.S. Resident. I am willing to travel and/or live outside the U.S.

Seeking a Management position where my considerable experience and knowledge of Construction civil estimating and project management that can be fully utilized to help drive employer profit margins and complete contracts on time.

Accomplished Head of Finance & Administration with 11 years of experience and a history of reducing costs, effectively managing financial operations, and optimizing efficiency and productivity. Demonstrated expertise in accounting and GAAP, SAP, strategic planning, and cross functional collaboration

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

Excellent PC knowledge and technical assistant experience

See Resume

I am writing to express my interest in applying for vacancies at your organization.

To work with the state-of-the-art machines with utmost aims of achieving result and proactive in competing with the challenges in oil and gas sector.

15 years construction and maintenace experience in electrical and instrumentation relating to the oil and gas indusrty. Other skills and experience gained in the last 5 years through construction supervision and project mamangement are piping, mechanical and civil disciplines.

Having 16 years experience in pumping and assescories of Pipe line, Motors, Engines, System study, Trouble shooting etc. Having abroad experince. Visited Lao PDR, Thailand, Srilanka. Handled Project works at varoius sites in India and in Abroad.

Experience in Conveyor Belt design and maintenance, Conveyor System maintenance, and Construction engineer. Worked as a supervisor, sales engineer and mamanger. Qualified Japanese Gijutsushi (equivalent to APEC engineer) in construction.

mechanical structure engineer

Outside Plant Technian, Bell System Trained, College Degree, AVAYA ACS PBX READY, copper/fiber palnt install/test/termination, Cat 5 and 6 as well as paging, cameras and home theater seeks contract/fulltime work in Middle East or almost anywhere in the world..

Human Resources professional with over 15 years experience. Areas of expertise include benefits administration, employee relations, payroll, reporting, records management and project management. Responsible, detail oriented with strong organizational, analytical, problem solving, communication, an

6 yrs experience on drilling rigs. Derrick Hand for 2 yrs. 8 yrs at Goodyear Canada, worked as a Final Inspector, Tire Builder, and Cure Operator.

If you are looking for a dedicated, hardworking, honest, dependable employee who can think “Out Side the Box”, see further into the future than the end of his nose and is a dedicated team player - your search may be over.

25 yrs mining experience. Engineering. Operations. Supervised heavy equipment. Team player. Give job 100%. Quick learner. Show respect to all individuals. Represent employer with professionalism. Impeccable attendance & safety. Open to international positions

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

QA / QC Instrument Inspector

Sales and marketing engineer I am a connfident team player; I have leadership and commitment, easy to make relation wiith others

Skills in various disciplines such as Welding Inspection, Plant Inspection which includes static equipments and piping, Material Testing, Failure Analysis and Lifting Inspection.

Manager / Supervisory position in the field of Administration, Personnel, Finance Accounting, Business

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

I am an Industrial Hygiene & Safety Specialist in NJ and am looking for standard full-time work that uses IH sampling, report, and engineer control development skills.

Certified chemistry graduate with experience in quality control and pharmaceutical laboratories seeking a position in a professional establishment within which to further advance skills and experience

DOCUMENT CONTROLLER

Self stater and takes full charge of enterprise

Ph. D in Chemistry with 4 years postdoctoral experience in purification technologies.

Long experience, professional skills, mastered business sectors: Oil - Petrochemical plants, Banks, Government organizations, Multinational organizations, Hotels & Commercial companies all with its different type of applications, working environments and unique needs.

CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)

1992 entrances as professional soldier into the Austrian federal-army, after conclusion of the necessary courses 1996 takeover as official. 1998 graduations of the NCO-course. Special training in the telecommunications-area for shortwave and ultra-short-wave as well as data-radio.

Senior Account Representative

PIM EDW EDMS CAD INTERGRAPH Engineer. 11 years of experience on IT Application in Engineering, Working on Engineering Data / Document Management, Intergraph CAD System and EDMS (Electronic Document Management System) (such as PDS, Smart Plant products, AIM, Directa, SPF); Experienced in Oracle Data

QA Manager,Quality Engineer, QA/QC Supervisor, Auditor, Instructor,Multi-Discipline Field Inspector

Senior Logistics Coordinator

Talented HR professional with a generalist background. Experienced working in a professional services environment with complex hierarchies and matrix management. Ability to operate at both a strategic and operational level, within a geographically diverse team and in an international role.

Over 20 years Quality Management and Supervision experience in Heavy Engineering Construction Industry

Experienced Laboratory Manager. 17 years petroleum lab experience. 12 years management experience. Extensive knowledge of ASTM IP, UOP, ISO test methods, ISO 9000, purchasing, budgeting, equipment maintenance, staff management, environmental and safety requirements in petroleum testing laboratory.

I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an

Innovative thinker with broad-based expertise in human resources, and business development.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out