Resume - Instrument Designer/6 years of experience in Instrumentation Engineering & Const...

Misco Jobs

Resume #74575

CONTACT INFORMATION:
View contact information...

Instrument Designer

SUMMARY OF EXPERIENCE:

I have extensive years of work experience in Oil and Gas Industry covering a broad aspect of design engineering stage. I easily adapt to working environment, I am a fast learner and able to work on an individual basis as well as with a team. My best quality is that I work well under pressure with tight deadlines and minimum resources in condition. Have deep knowledge in Instrumentation Engineering & Construction Design.

ACCOMPLISHMENTS:

Successfully handled the detailed engineering design for a major LNG Project, after having been a part of the Instrument Design Group for the said project. Recently Project lead designer in 2 major projects such QCS Train 6 and Train 7 Qatar Gas 3&4 Onshore Project in Qatar.
Currently and comfortably working in QGX Qatar Gas 11 Expansion Project train-4 and train-5 Ras Laffan Qatar.

JOB DISCRIPTION:

* Field instruments allocations layout
* Junction Box allocations layout
* Instrument Breakdown drawings
* Main cable layout routing
* Main cable tray layout routing and secondary cable tray layout routing
* Underground cable route / stub-up layout
* Plot plan drawings field instrument, Main cable, Cable routing stub-up
* Layout of instrument wiring and manual routing for secondary cable (MTO)
* Layout of instrument air supply and air piping manual routing for (MTO)
* BOM Data (Material Takeoff Calculations) cable tray/tray support, Junction Box, stanchion, air piping, tubing, cable gland, main cable, secondary cable (signal cable).
* Layout of instrument cable transit arrangement
* Control room layout drawings
* Wiring connection List (Intools V.6)
* Hook-up (Intools V.6)
* 3D Modeling (PDS) Plant design system
* Smart Plant Review ( SPR)
* Has ability to read and understand P&ID, Piping, and civil drawings.

EMPLOYMENT HISTORY:

INSTRUMENT DESIGNER
Instrument Field Engineering Supervisor
Chiyoda Technip Joint Venture CTJV (Qatar Gas)-QGX Site Office
QGX train-4 and QGX train-5
QG11 LNG Onshore Facilities Project
Ras Laffan Industrial City Qatar
May 2008 – Present

* Responsible for field engineering design change (FDC) at site construction.
* Report directly to site construction lead engineer and instrument construction manager regarding FDC status.
* Revised and update all instrument site construction drawing (As Built) such as control room drawings, layout of fire and gas, layout of field instrument, Layout of main cable tray, layout of instrument cables, layout of fiber optic cables, Main cable layout, Layout of cable routing stub-up.
* Responsible for design change marked-up main cable tray all area of process train including sulfur recovery unit.
* Incorporate field design change for instrument wiring connection list and connection list for foundation field bus.
* Making all instrument construction drawing (As Built).
* Incorporate field design change for hook up drawings, instrument impulse line hookup, instrument air tubing hook up, instrument wiring hookup.
* Coordinate and advice field supervisors of how to update construction drawings as per site condition.
* Site inspection instrument installation such as transmitters, valves, cable tray, main cable route, fiber optic cable route, air piping and tubing, wiring hook up and tubing hook up.
* Responsible for checking construction drawing
* Coordinates with the other engineering disciplines.

LEAD INSTRUMENT DESIGNER
Chiyoda Philippines Corporation
Meralco Ave., corner Gen. Araneta St., Pasig City Philippines
Qatar gas 3&4 Onshore Facilities Project
QCS train-6 and QCS train-7
January 2008 – May 2008

Provides first line supervision whilst maintaining the quality of work for each Detail Design Engineering Deliverable and assist Engineers on technical and IT related matters. Reports directly to Engineering Manager, and prepare/submit weekly and monthly Progress and Man-hour Reports including weekly and monthly schedules, which include manning schedule.

* Responsible in carrying out the project execution & quality assurance of design outputs.
* Assign Engineering works & Supervises Instrument Designers / Engineers and Junior Designers.
* Perform technical discussion among project team members to decide the best way to perform a task base on project standards.
* Responsible for the monitoring and update of open items (such as "HOLD" and to TBD items) from the design output, ensuring its timely resolution and expediting its removal from the design output.
* Coordinates with the other engineering disciplines.
* Controls design inputs & Outputs.
* Communication channel from/to CKC (Yokohama)
* Responsible weekly meetings and other coordination meetings among the project team members are conducted to discuss work procedures, status, schedules and other concerns.
* Update cable block diagrams, typical installation drawings, hook-up, loop drawing and system architecture layout.
* Make and evaluate costing and instrument modeling of the projects and ensures that appropriate instruments are being used.
* Oversees the project engineering role and responsibilities concerning design, procurement, engineering system configuration, electrical, panel, instrumentation, and allied engineering job for the entire project completion.
* Continuously monitor project executions to ensure corrective actions are carried out.
* Ensure that standards are followed and help generate suggestions for improvements.
* Provide training for Basic Engineering Design to new members
* Assist engineers in completing deliverables.

Manage the Team to ensure the appropriate standards and qualities are maintained.
Coordinate with Yokohama Head Office counterparts and Instrument Engineers to achieve a common goal of completing the Project on time and of the highest quality. Review and Approve drawings prior to Issuance to Yokohama Head Office.

PROJECT COORDINATOR
Chiyoda Corporation, Yokohama Head Office
12-1, Tsurumichuo 2-chome, Tsurumi-ku, Yokohama 230-8601, Japan
Qatar Gas 3&4 Onshore Facilities Project
QCS train-6 and QCS train-7
July 2006 – January 2008

* Undergone Lead Design Engineer Training detail engineering design
* Project coordination detail construction design such as Control Room Layout, layout of field instrument, layout of fire and gas system, layout of instrument wiring, layout of main cable, layout of underground/cable routing stub-up, layout of cable tray and 3D modeling activities.
* Responsible for detail construction design coordination between subcontractors (Chiyoda Phil's. Corporation), Chiyoda Keiso Corp. and Chiyoda Yokohama.
* Coordinates with Philippines instrument lead engineer regarding all activities execution of the project.
* Responsible for issuing all 2D deliverable drawings and 3D activities to site construction.
* Doing review checking all drawings and 3D activities done by subcontractor before issued to project planning engineer.
* Making marked-ups for underground cable route, cable tray route, and stanchion location, junction box location.
* Coordinates with PDS IT Group, Piping group and other discipline and resolved PDS modeling problems occurred in the progress of the Project.
* Project coordination 3d modeling, all scope for instrumentation such as instrument stanchion, instrument junction box, panel, cable tray, trench/duct bank.
* Performed INTOOLS wiring connection.
* Attending internal 3D model review, 3D milestone model review and 90% 3D Model review with customer.
* Preparing comments document report, expertise in 3D PDS Replication from project to new project.

Manage the Team to ensure the appropriate standards and qualities are maintained.
Coordinate with Yokohama engineer's counterparts and Instrument Engineers to achieve a common goal of completing the Project on time and of the highest. Review and Approve drawings prior to Issuance to site construction.

INSTRUMENT DESIGNER
Chiyoda Philippines Corporation
CPh Building, Meralco Avenue
Pasig City, Philippines
Qatar Gas Expansion Project (QGX train-4)
Jan. 2004 – June. 2006

* Operate 2D CAD Microstation extracted from PDS for Layout of instrument cable routing/duct bank.
* Preparing layout drawings for (MTO) Air Supply Piping Drawings and Secondary Wiring route for all area process and sulfur.
* Making manual routing design for Air Piping for (MTO) from Instrument air going to field instruments such as control valves and other instruments, which are, needed air.
* Making manual routing design for secondary wiring route from no.2 JB to branches field instruments all area in process and sulfur.
* Doing manual MTO calculation for air piping base on air piping routing.
* Doing manual MTO calculation for secondary wiring base on wiring routing.
* Responsible for checking and review all isometric drawings for MTO (Air piping drawing and Secondary wring route).
* Coordinates Japanese engineer regarding MTO calculation output.
* Responsible for basic engineering design 2D&3D for trenching, section details, and junction box allocation.
* Performed 3D PDS operation for junction box, cable tray, trench, instrument stanchion by using Raceway modeling.
* Prepared Instrument plot plan and other 2d deliverable drawings.
* Performed Intools wiring connection module.

INSTRUMENT JUNIOR DESIGNER
Chiyoda & EEI Corporation (C&E)
C&E Building, Meralco Avenue
Pasig City, Philippines
AKG 1- Al Khaleej Gas Project
Client: Exxon Mobil Middle East Gas Marketing Ltd. Qatar.
Feb. 2002 - Dec. 2003

* Performed CAD works based on given marked-ups from designer.
* Performed drawing from scratch using AutoCAD and Microstation.
* Performed Material take-off for estimation use in preparation of cable construction.
* Create detailed engineering drawing in accordance to the project and company standards.
* Performed clash checking in SPR (Smart plant review) software for easy to view the modeled fixture.
* Performed support miscellaneous work to design engineer.
* Maintain accuracy and uniformity in CAD drafting and support works.
* Checking completed works, CAD drawings prior to submittal to the design engineer.

SPECIAL SKILLS:

PDS Plant design System (EE Raceway)
Smart plant Review (SPR)
Microstation (Bentley System)
AutoCAD (All Versions)
Smart sketch
Intools 6.0 (Intergraph)
Microsoft Office (Access, word, Excel, PowerPoint, Outlook)

EDUCATIONAL ATTAINMENT:

B.S. IN ELECTRONICS AND COMMUNICATION ENGINEER
Liceo de Cagayan University
Vamenta blvd. Carmen Cagayan de Oro City, Phil's.

TRAINING / SEMINARS ATTENDED:

* Supervisor Safety training – SHES training center (CTJV-QGX PROJECT).
* H2S Escape Mask training – SHES training center (CTJV-QGX PROJECT).
* Confined Space Training – SHES training center (CTJV-QGX PROJECT).
* IIF (Incident Injury free) – SHES training center (CTJV-QGX PROJECT).
* Safety Induction – SHES training center (CTJV-QGX PROJECT).
* Job Safety Analysis – SHES training center (CTJV-QGX PROJECT).
* Height Safety – SHES training center (CTJV-QGX PROJECT).
* PTW (Permit to Work) – SHES training center (CTJV-QGX PROJECT).
* Hazard Management – SHES training center (CTJV-QGX PROJECT).
* Values and Team Building Workshop Seminar (VTWS)
Training and Recruitment Center (Chiyoda Philippines Corporation).
* Project Lead Engineer Training
(12-1, Tsurumichuo 2-chome, Tsurumi-ku, Yokohama 230-8601)
Chiyoda Corporation, Yokohama Japan.
* ISO 9001: 2000 Quality Management System Awareness Orientation
(By TUV Product Service Asia Pacific PTE Ltd.)
* Instrument Design Engineering (Chiyoda Philippines Corporation)
* EE Raceway Modeling (PDS) (In-house Training, Instrumentation group C&E Corporation).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 1357)

Go to Search Parameters...

Brief Description

To obtain long-term employment with an organization that will allow me to utilize my sales, management, and organizational skills in order to achieve company objectives. An honest approach that has resulted in exceeding set goals in the petroleum industry for the past 22 years.

Environmental professional with a solid background and experience in environmental projects and permits under CERCLA, RCRA, OSHA, FERC, NESHAP, CAA, and CWA regulations. A highly motivated project manager and effective communicator.

Chemical Engineer with 15 years of Safety, Environmental, & Transportation regulatory experience in oil, gas processing, chemical distribution, and trucking industries, including design, construction, operations and policy and procedure development compliant with regulatory requirements.

Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering

Geologist graduated at University of La Plata, Argentina. Mudlogger at Exlog, data Engineer at Exlog/Baker Hughes Inteq, Argentina. Mudlogging Coordinator at Baker Hughes Inteq, Argentina. Ops. Manager at Datalog, Argentina. Wellsite Geologist in Argentina and Venezuela.

“To put my best possible efforts by applying my professional qualification and expertise in order to enhance the image of the organization in which I am working”

I am Chemical engineer backed by MBA with 15 years of proven track record in the field of marketing & sales of specialty chemicals to wide range of industries. I have worked for & trained with some of the largest multinational chemical companies.

Worked as a Team Member in Dolphin Energy Drilling Project of 26 Wells

Develop my skills and explore my knowledge in terms of new technology. My expertise in terms of computers are to pursue my jobs as much as possible my agressive to know better the new era of new technoligies.

Twenty-two years in geologic research and preparation of reports on coal and coalbed methane resources in Virginia. Experienced geologic mapper. Microsoft Programs, Earth Vision, Arcview GIS 3.2, ARC/INFO, SPSS, and Adobe PageMaker. published.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

Provide customer service / interface services. Logistics, material chain facilitator, customs, local contract administration, housing, transportation, liaison

i have nineteen years more in Cad Drafting Mechanical and Electrical Drawing

Develop technical procedures, provide guidance and review other procedures (developed by technical staff) to improve their maintenance oriented effectiveness.

Knowledge of SAP, Commerce Graduate and around 16 years experience Total, Worked in Logistics and Warehousing.

International Sales Business Development Leader Oil & Gas

EXPEDITOR / MATERIAL MANAGER / LOGISTIC'S

Offshore surveyor with geophysics experience

12 years of expereience in medical emergencies,7 years expereience as offshore rig medic, 2 years as trainee HSE

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

A dedicated, trustworthy and competent Offshore Medic. Accepts responsibilities and perform them willingly and with efficiency. High motivation and high moral and ethical standards are personal trademarks. Has good public relation skill. Excellent to read, write and communicate in English.

For over 15 years, I have worked in various oil companies throughout the world. As such, I have possessed expert level skills in testing and analysis of petroleum related products, including oil, gas, water, boilers and environmental samples using sophisticated analytical equipment.

Material and logistics handling Specially Drillings materials

Geoframe data loading (2d,3d, well data), Geoquest software support (Charisma, CPS, and Finder), Project management, Unix Environment.

During successful career with Mobil Oil and Bechtel Corp, developed expertise in technical and management functions for stateside and offshore supply chain projects ranging from $150 million to $3.5 billion.

Electrical / Instrument Inspector

Bioinformatician and clinician

Calculated volumes, Maintained well, equipment and compressors, participated in well reviews, intered volumes in computer.

Seeking middle level managerial assignments in the domain of Procurement / Materials Management to excel with organization of repute.

IT with expertise in systems business analysis, database management, ERP implementation & support

I am enclosing a copy of my resume in hopes you will consider me for a Petrophysicist position with your company. I believe that my petroleum engineering, petrophysical interpretation, and reservoir characterization background are a good fit for the qualifications needed the petrophysicist position

Adrress:7/62,jalan kosas utama,taman kosas,Ampang

Driver

I am an Unlimited Oceangoing Master with more than 15 years experience as Captain, ten of which are on Offshore Support Vessels.

A Mechanical Engg gradute having over two decades of experience of whole gambit of SCM including Global contracts & procurement , e-procurement, Negotiation,Dispute Resolution & Conflict Manament, Warehousing , SRM, etc in a very large MNC , Public sector oil & gas E&P( down steam/upstream)

I have experience Wireline logging and Basic Open hole and Case hole interpretation skill

Consultant geologist with close to 10 years experience in mudlogging, wellsite geology, operations geology, sales and software support and training. Majority of my career has been in the UK and Norway with one year spent in Houston, Texas. I expect to have a visa to work in Canada by June 2006.

Instrument Designer/6 years of experience in Instrumentation Engineering & Construction Design

I have over 10 years experience out of which has solid 7 years of experience both as a Project Leader and a Team Leader and is has excellent understanding of project life cycle, quality systems, data migration, risk management, software testing, data modeling and developing specification

Production/Development Geology, Exploration geology, Sedimentology, Sequence Stratigraphy, Geomodeling, Seimic interpretation, Reservoir Characterisation, Petrel.

Graduate with 6 months Fire Fighting Training from Japan, four years experience as Fire Chief of Lahore Metropolitan Fire Brigade, Eight years experience as Fire Prevention Officer [District Civil Defence Officer]

Master Mariner

M.Sc Petroleum Engineering, 28 years experience as Drilling Fluids/Mud Engineer and Reservoir Engineer

• Flexible realistic, sensitive to the complexities of work environment and looking forward for a challenging and rewarding career

I currently work for a company in the oil and gas industry, in the Health Safety and Environment Department as the health, safety and environment coordinator. I have been in the Site Management applying my skills and experience for the 10 years of my industrial engineering and management experience.

Contracts Administrator

Ex-marine officer on board ro/ro ships & general manager in general supply.

I am dynamic, reliable, flexible, goal orientated. I worked for Transocean Sedco Forex in materials department. I have studied some accountancy, done marketing and various training. I have done a degree in Maths and Physics and I am studying Computing. Also, I am fluent in both English and French.

Analyze, design, develop, implement, and evaluate performance improvement programs using the ADDIE process. Experienced in designing and developing online (Web-based e-Learning) and blended learning as well as video training. Have used/been trained in Microsoft Word, PowerPoint, Excel, and Project,

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out