Resume - I have 25 years experience in the Instrumentation field as Instrumentation super...

Misco Jobs

Resume #78218

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
I wish to work in this prestigious organization and put all my skills, experience and my utmost efforts in cost reduction towards inventory (spares), reduce downtimes for maximum availability of machinery by good planning and doing the job right at first time to avoid re-occurrence of the fault, improving the working culture among colleagues to get maximum output.

ROLES:
„« I can do any job independently to meet the emergencies, since I have started my career as technician.
„« Good knowledge as QA/QC Inspector in construction, installation of instruments, FAT, SAT, specifications, standards of instruments cables, cable trays, stub-ups, impulse tubing, cable tagging, cross ferruling.
„« Following P&IDs, hook- ups, termination details, ILD's, for inspection.
„« Attended inspections for installation of control room system panels, field instruments, junction boxes, cables testing, termination, fiber optic cable testing, attended RFI, punch clearances, to attend QA/QC meetings for implementing the standards, procedures, specifications with consultant and contractor.
„« As instrument supervisor in dayshift I used to lead a team of 6 technicians and 2 semi-skilled to carry out maintenance jobs in the designated plants.
„« Planning the jobs for maintenance, distribution of works among technicians.
„« Verification of spares and procurement.
„« Documentation.
„« To follow the SWP system.
„« Carried out the round the clock shift instrument supervisor duties to meet the emergencies and for the smooth running of plant.

KEY SKILLS:
„« Good experience in calibration& maintenance of all types of process field instruments.
„« Loop checking, functional testing of loops, pre-com &commissioning of various systems (N2, H2S, distillation unit, exchange unit, intermediate steam generation unit, CGC compressor, cracker furnace) etc.
„« Logic checking, fault finding of logics.
„« Experience on CS3000 Yokogawa DCS.
„« Experience on MMS Bently Neveda.
„« Experience on TMR (Triconix) Invencys.
„« Experience on F&G System Triconix Invencys.
„« Experience on drager gas sensors & fire alarms.
„« Experience on limitorque motor operated valves.
„« Experience on rotarque motor operated valves.
„« Experience on foundation field bus.
„« Experience on all types of control valves.
„« Participated in 5 major shutdowns (turnarounds).

PERSONAL PROFILE:
Date of Birth: 01.06.1966
Nationality: Indian
Languages Known: English, Hindi, and Telugu
Marital Status: Married, 2 Children.
Passport Number: E 4048471
Passport Validity: 27/11/2012.
EDUCATIONAL QUALIFICATIONS:
1. ITI trade certificate 2 years course from industrial training institute Government of Andhra Pradesh (India).
2. National Vocational Training Certificate 1 year course from Hindustan Aeronautics Ltd, Government of India.
3. Diploma in Electronics & Communication Engineering 3 year's course from State Board of Technical Education and Training, Government of Andhra Pradesh (India).

TRAININGS:
1. Advanced vocational training in industrial instrumentation at AVTS Visakhapatnam for 6 weeks.
2. Attended training on swagelock fittings for 6 days at Babha Atomic Research Center, Mumbai (India).
3. Attended vendor training on foundation field bus, DCS basics from Yokogawa at Jubail (Kingdom of Saudi Arabia).
4. Attended vendor training on DCS CS-3000 configuration from Yokogawa at Jubail (Kingdom of Saudi Arabia).
5. Attended vendor training on MMS (Machine Monitoring System) from Bently Neveda at Yanbu (Kingdom of Saudi Arabia).
6. Attended vendor training on configuration of triconix (FGS, PESS), TMR tripple module redundency from Invensys at Yanbu (Kingdom of Saudi Arabia).

TRAINING ON SAFETY:
1. Attended the course and passed the examination for SWA (Safe Work Authorisation) at Khammam Chemical Refinery (India) and Yansab (KSA) also.
2. Confined space entry permit authorisation at Khammam Chemical Refinery (India), and Yansab (KSA) also.
3. Pre-commissioning, commissioning, safety in transit, PSSR (Pre Startup Safety Review) at Khammam Chemical Refinery (India), and Yansab (KSA) also.
4. Attended seminar on industrial fire fighting, at Khammam Chemical Refinery (India).

FIRST AID TRAINING:
Attended First Aid Training at John Ambulance First Aid Training Society (India).

PERSONEL ATTITUDE:
„« Easily adapt to new systems.
„« Mingle with colleagues.
„« Quick and correct action.
„« Commitment in doing job.
„« Continual improvement.

EXPERIENCE DETAILS
01/ 01/1984 to 28/01/1985: Worked as Instrument Technician.
Employer: M/S Marktech Instruments. Hyderabad.

29/01/1985 to 28/01/1986: Worked as Electronic Mechanic.
Employer: Hindustan Aeronautics Limited, (Government of India) Hyderabad.

31/01/1986 to 31/10/1993: Worked as Instrument Technician.
01/11/1993 to 31/10/1995: Worked as QA/QC Inspector.
01/11/1995 to 31/07/2007: Worked as Instrumentation Supervisor
Employer: Heavy Water Plant, Manuguru, Khammam Chemical Refinery, Department of Atomic Energy, Government of India.
H2S and H2O chemical exchange process for producing Heavy Water.

19/08/2007 TO Till Date: Working as Instrumentation Supervisor (Olefins-Maintenance).
Employer: Yanbu National Petrochemical Company, YANSAB/SABIC, Yanbu, Kingdom of Saudi Arabia.

HANDS ON EXPERIENCE:
* Maintenance, calibration and trouble shooting of field instruments for measuring temperature, pressure, level, differential pressure, flow of varies makes, Yokogawa, Rosemount, Fuji, ABB (conventional & foundation fieldbus).
* Calibration & maintenance of transmitters (coriolis, vortex), magnetic flow meters of make (Yokogawa, Emertion, Micromotion).
* Calibration & maintenance of displacer type level instruments (leveltrol), radar level measuring instruments, remote seal diaphragm type level transmitters, ultrasonic flow transmitters ( Yokogawa, Fisher, Emertion, Vega)make.
* Maintenance, calibration and trouble shooting of pneumatic, electro pneumatic and motor operated valves (rotaque, limitorque), on-off valves (Bettis, Elomatic).
* Maintenance, calibration & trouble shooting of control valves (conventional & foundation field bus) diaphragm actuated, single acting & double acting type piston operated valves.
* Maintenance, calibration, trouble shooting of control room instruments like PLC, controllers and indicators,
DCS Yokogawa CS-3000, TMR Triconix, MMS Bentlyneveda, CCS, FGS.
* Fault finding and rectification of analog and digital I/O's, loop checking, wiring termination and cross feruling etc.
* Gap adjusting, configuration, testing & maintenance of vibration probes, velometers.
* Calibration & maintenance of gas sensors (Drager, General Monitors)
* Trouble shooting in logics, loop checking, functional checking of logics, involved in logic modifications.
* Commissioning of various plants like intermediate steam generation, nitrogen generation plant, compressed air plant, hydrogen sulphide generation plant, de-mineralisation plant, H2S ¡V H2O exchange deuterium extraction unit, distillation unit, cooling water system, effluent water system.
* Participated in the functional checks, pre-com, commissioning of Ebera make cracked gas compressor, furnace.
* Attended for inspections (FAT, SAT, calibrations, installation of field Instruments, junction boxes, signal &fiber optic cables test & termination.
* Worked under Safety Work Permit system in hazardous areas.
* ISO 9001-14001 QMS, EQMS awareness, documentation.

COMPUTER SKILLS:
Working knowledge with MS-Office 2003, 2007.

PRESENT SALARY: 14000/Saudi Riyals Per Month.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1500)

Go to Search Parameters...

Brief Description

HSE

Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

I have over 10 years as a driller and derrickhand

Technical Writing with 15 Years of Experience in the UAE

Procurement, Supply Chain and Logistics professional spanning industry sectors on global basis

I am a young man who has worked hard all and received little for his efforts, and what I have received is gone. I am looking for a new start in a new line of work that is more profitable than those jobs I have had in the past.

Radio telecommunications operator based in Amman/Jordan , have various work experience in coastal radio stations, on ships board, united nations . total experience over 5-years . Looking for good opportunity in oil/gas offshore, onshore projects : world-wide as RADIO OPERATOR

Title of qualification awarded Bachelor of Science in Physics Name and type of organisation providing education and training Universidade do Algarve, Faro, Portugal

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

Previously worked for a oil and gas brokerage firm in Houston, Tx at the end of 2008. Experience as leasing agent and experience in running title in Texas.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Procurement/Supply Chain Manager experienced in Oil & Gas operations (South America). Contracts negotiation and administration, excellent leadership skills and broad knowledge of local vendors. International logistics experience.

10 Plus years Developing and maintaining EPC Schedules Utilizing Primavera Softwares

Driver, teacher, maintenance computer, air conditioning and electrician

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Consultant, Control Risks; Formerly Country Manager, Nigeria, The Olive Group, Chief of Security, diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in work

3+ years experience in Oil Gas Document Control on long term Offshore/Onshore projects, dealing with contractual & subcontractor/vendor documentation Seeking a contract position, min. term of 6 months in a progressive position that will allow me to move into the field of Document Control Management

I have 12 yrs cementing experince in UK and worldwide with the same company working with different Oil companies. I also have well-bore cleaning experince for 2 years. I have dealt with Mud, brines and different cemeting fluids.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

PDMS and AUTO-CAD programe

IT/Business/Analytical professional with experience in the Gas, Safety, and Welding industries as well and inventory planning and forecasting in the auto industry.

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

11 Years experience in oilfield

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Experienced Property Manager and Landman

Security Officer, Gold mine experience. Security, Explosives and Drug Dog Trainer/Handler

Ellipse Business Analysis Skills in the Area of Asset Management, Work Management, Purchasing, Warehouse, Catalogue, and others.

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Experience in Drilling&Well completion and Knowledge in IWCF&IADC with speaking 4 languages fluently

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

My qualifications are reinforced by over 20 years as a front line supervisor in the construction, rejuvenation, revamp of Oil and Gas, Petrochemical and Nuclear Power Plant Projects specifically in the field of Insulation Works.

A Buyer /Expeditor with 18 years Gulf experience

I am a hardworking and honest person looking to have a new career in the oil industry. I am dedicated to my work and would be a good employee.

Pip in indistrial safety, working in ministry of elec & water ,kuwait.

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Sub.: Power plant /Utility Electrical Maintenance Engineer

At present doing a 2 year contract at a bulk fuel installation, in Basrah, Iraq, as an Operator. I have 25 years experience as a fire fighter and paramedic and the last 2 years have been doing aviation and road fuels at an Airport and bulk fuel installation

Auto CAD 14/2000i/2004/2005/2006/2007,AutoCAD Map, CAD Overlay, Map Info7.0,Arc View3.2

International field work resume(non-abbreviated)

Over twenty years of experience

QA/QC Engineer & Inspector for (Welding, NDT, Piping, Structure, Mechanical, Painting, Coating, Storage Tank, Electrical & Instrument) , Construction Supervisor and Field Engineer

Procurement & Supply Chain Management

INSPECTION and SUPERVISION (Welding / Piping / NDT / QA/QC / Mechanical / Materials / Coating and Painting).CSWIP 3.2,ASNT Level 3,NACE Coating Inspector,ISO Auditor

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out