Resume - A TWI certified and registered welding inspector (CSWIP 3.1) and worked as Field...

Misco Jobs

Resume #82834

CONTACT INFORMATION:
View contact information...

Career Summary:

A TWI certified and registered welding inspector (CSWIP 3.1) and worked as Field Piping Engineer with fourteen (14) years extensive experienced in oil and gas construction projects, refineries, gas plant, GOSP, power plant and desalination plant. Major activities involved general oversight of the fabrication/construction activities from a quality and good construction practice standpoint. Activities involved in welding inspection, structural, piping inspection, materials inspection, punchlisting/walkdown inspections, hydro test inspection, turnover documents and pre commissioning activities. Review and provide recommendations to construction issues raised through site queries and technical queries. Review of ITP'S and documentation. Inspection on site and fabrication shop to ensure that work is being performed in compliance with the project quality control requirement. Responsible for observing the contractors fabrication/construction techniques, procedures and installation to ensure it is performed in accordance with project specifications and requirements. Ensure pre- commissioning activities are carried out in compliance with project requirements. Participate in the weekly QC and construction meetings review as well as weekly safety walk down inspection on site and weekly safety general meeting with the sub contractors. Complies with the Company's QHSE management system and reports all incidents and near misses the QHSE representative.

EDUCATIONAL ATTAINMENT:

Course: Bachelor of Science in Civil Engineering
Western Philippine Colleges
Batangas City Phillippines
Graduated -1991
QUALIFICATION:

TWI CSWIP 3.1 TWI Cert. No. 7642/2
TWI Registered Welding Inspector Registration No. R/2914
TWI International Welding Inspector Diploma No. IWI-B/GB/02716
TWI European Welding Inspt'r Practitioner Diploma No. EWIP/GB/02716
Aramco Qualified Inspector Sap No. 70002078

TRAININGS AND SEMINARS:

CSWIP Course SGS Inspection Services Saudi Arabia Ltd.
P.O Box 6702
Dammam 31452 KSA
August 2003

Hands on Training of PT and MT Belleli Saudi Arabia Ltd.
Yanbu, KSA
May 1993

Welding Inspector's Course Philippine Welding Society
Manila, Philippine
October 1992

Upgrading In Pipefitting National Manpower and Youth Council
Manila, Philippines
October 1991

EMPLOYMENT HISTORY:

Company: Air Energy Resources (Qatar)
Project: Qatar Gas 3&4 On Shore Projects- QCS
Location: Ras Laffan, Qatar
Position: Mechanical Inspector/Welding Inspector
Date: 24November2008 to Present

JOB DESCRIPTION:

Mechanical and welding inspection in Train6 and Train 7. Inspection activities include witnessed mechanical allignment of Column, Vessel, Exchanger and other stationary equipment. Internal inspection of Column tray.Welding Inspection and Piping Inspection.Walkdown inspection of completed line.Witnessed hydrotest inspection and pneumatic inspection.Review of test packages.

Company: Technip Italy (Saudi Arabia Ltd.)
Project: Khursaniyah Gas Plant (Aramco Project)
Location: Khursaniyah, KSA
Position: Welding Inspector
Date: 23February 2008 to 10November 2008

JOB DESCRIPTION:

Inspection of piping fabrication and site erection in relation to daily fit up, weld visual inspection and preparation of documents. Monitoring welder performance and weld repair status on weekly basis. Preparing NCR's, DR's and QA/QC reports. Review of test packages. Punch listing and prepare punch list items prior to hydrotest. Documentation of welding, NDT and NDE reports. Preparation of reports for client submittal. Welding material control, welder control, welding repairs. Responsible to complete necessary documents for all witnessed items. Coordinating with construction supervisor/engineer. Reporting of poor workmanship and violation. Coordinating with NDT crews and third party inspector. Supervised subcontractor's inspectors with regards to site inspection and quality.

Company: Eastern Bechtel Company Ltd. (EPC)
Project: Habshan III Project (OGD III)
Location: Habshan, Abu Dhabi
Position: Field Piping Engineer
Date: October 2007 to December 2007

JOB DESCRIPTION:

Ensures engineering issues related to piping design, fabrication, installation, testing and pre-commissioning are resolved consistent with the project design. Received and answer site RFI's in relation to problem encountered on site during erection. Resolved in a timely manner field piping related issues that arise between the EPC contractors, sub contractors, vendors and other interfaces. Carry out final inspection of installed piping and inline equipment, produce punch lists and supervise completion of remedial works. Track and report installed commodities. Monitors contractor's performance for piping and installation system and provide advice and take necessary actions to achieve company's design goals and meet specification requirements. Keeps supervisor informed on issues and schedule progress through regular reporting. Provide technical support to construction organization to assist field construction in the design requirements. Observe the subcontractor's operation and record daily accomplishments, problems, and manpower and equipment usage. Instruct site personnel in good housekeeping and safety practices. Assures projects safety and quality expectations are satisfied.

Company:
Bechtel /Senimdi Kurylys Joint Venture
Main Contractor: Parsons Fluor Daniel (PFD)
Project: SGP, TengizChevroil (TCO)
Location: Tengiz, Kazakhstan
Position: Sr. QC Engineer I - Welding & Hydrotest
Date: August 2006 to August 17, 2007

JOB DESCRIPTION:

Implementation of contractors QA / QC Programs and Activities in compliance to company codes and standards, project specification, QC procedures and (ITP's). Monitoring and Surveillance of all welding operations and piping works, ensuring piping installation / material correctness per approved drawings and ensuring welding execution, qualified welder performance. Monitor, review and approved contractors NDT (PT/MT/RT), PWHT, hardness & PMI Tests activities. Report any deviation, non compliance and recommend possible solutions to discrepancies found based on codes / standards, approved procedures and client specification. Perform and witness hold point activities. Pre and final line checking of piping test packages and weld count completion.

Company: Consolidated Contractors Company
Main Contractor: Japan Gas Corporation (JGC)
Project: Sohar Refinery Project
Location: Sultanate of Oman
Position: Welding/Piping Inspector
Date: February 14, 2005 to May 2, 2006

JOB DESCRIPTION:

Responsibility includes monitor and control welding variables and parameters listed in WPS during welding operations of all piping works. Involved in activities like welding surveillance/inspection, schedule for NDT, monitor PWHT activities, checked qualification of welders, witness actual welding of test specimen for PQR and WQT and make sure it is in accordance with procedure. In process welding surveillance to verify compliance with specified procedure including any preheats, interpass temperature control and post heat requirements Check that all equipment and inspection instruments are calibrated. Maintaining records of calibration, inspection and testing equipment. Manage quality activities at site related to Welding and NDE. Monitor pipe spool fabrication and installation in relation to fit ups, dimensions, alignments and distortion. Check joint fit up, bevel angle, root gap, root face and alignment of pipes before welding in all phases of fabrication.

Company: Consolidated Contractors Company
Main Contractor: Snamprogetti
Project: Gas & Oil Separation Plant (ARAMCO Project)
Location: Qatiff, KSA
Position: Welding Inspector
Date: August 2003 to October 2004

JOB DESCRIPTION:

Inspection activities on site and fabrication shop related to Welding, Piping, Structural and NDE. Monitor pipe spool fabrication and installation in relation to fit ups, dimensions, alignments and distortion. Check joint fit up, bevel angle, root gap, root face and alignment of pipes before welding in all phases of fabrication. Surveillance of welding activities in relation to Structural and Piping, verification of consumable control, welders qualification, correct application of weld procedures, preheat and PWHT. Conduct routine welding inspection on site. Supervise the quality of construction welding work and carryout proper surveillance and inspection of welding activities. Carryout witness, inspection and surveillance checks in accordance with the Site Quality Plan and contractor inspection and test plans. Check weather condition if suitable for welding. Confirmation of finished welds profiles and releases of sub assemblies, and completed assemblies for subsequent released to painting, erection and NDE.

Company: Consolidated Contractors Company
Main Contractor: Japan Gas Corporation (JGC)
Project: Haradh Gas Plant (ARAMCO Project)
Location: Haradh, KSA
Position: Welding/Piping Inspector
Date: February 2002 to June 2003

JOB DESCRIPTION:

Check and review daily welding reports. Performs inspections of various installation activities for adherence to welding specifications and procedures. Generates reports of conditions found during inspection activities. Notifies Quality management of significant problems and reports non-conforming items. Check isometric and fabrication drawing and verify if all the WPS for all types of joints are available. Do line checking of welds prior releasing of test packs. Review of test packages. Witnessed of Hydro test, flushing, pneumatic, and drying, reinstatement and chemical cleaning as required. Witnessed non destructive testing which is performed by sub contractor inspection personnel such as PT and MT. Day to Day interface with contractor's inspection, supervisor and engineering personnel. Coordinate with Document Control, Production, Project Management Team, Engineering Department, and Certifying Authority and Client Site Representative with regards to Quality aspect.

Company: Consolidated Contractors Company
Main Contractor: Japan Gas Corporation (JGC)
Project: Hawiyah Gas Plant (ARAMCO Project)
Location: Hawiyah, KSA
Position: Piping Inspector
Date: January 2000 to August 2001

JOB DESCRIPTION:

Responsibility includes dimensioning of fabricated spools as well as checking the orientation prior to release for welding. Inspect that each piece of pipe is marked with corresponding traceability before cutting. Verifying piping material identity (pipe, valves and fittings) and its conformance to installation/erection drawings. Performing piping walkdown inspection and completing punch list. Ensure contractor's dimensional control methods for checking that all works are properly set-out and satisfactory. Verifications that dimensions, fitup and weld preparations are in accordance with WPS and drawings. Check the fittings required for particular spools/assembly are complete and as per isometric. Do line checking of pipes and prepare punch list items before releasing to hydrotest.Walkdown inspection of completed system prior to turnover. Reviewing and verifying completeness of piping test packages (hydro or pneumatic) prior to testing. Witnessed pressure testing of lines as well as pneumatic inspection. Witnessed air drying and blowing of pipes. Do reinstatement of lines after hydrotest and pneumatic inspection. Inspection and close out system punchlist.

Company: Consolidated Contractors Company
Main Contractor: Technimont
Project: Saudi Arabian Fertilizer Company (SAFCO II)
Location: Jubail, KSA
Position: Piping Inspector
Date: January 1999 to July 1999

JOB DESCRIPTION:

Activities on site include punchlisting of completed lines and prepare punchlist items. Review of hydrotest packages prior to releasing to test. Witnessed hydrotest and pneumatic inspection. Reinstatement inspection and closing out system punchlist. Prepare as built drawings as per site condition.

Company: Consolidated Contractors Company
Main Contractor: Bechtel Corporation
Project: Shaybha Producing Facilities (ARAMCO Project)
Location: Shaybha, KSA
Position: Welding Inspector
Date: March 1997 to April 1998

JOB DESCRIPTION:

Dimensional inspection of structural beams, columns and girders prior to releasing to welding. Weld visual inspection of structural and pipe spools prior to releasing to painting and NDE. Checked qualification of welders, witness actual welding of test specimen for PQR and WQT and make sure it is in accordance with procedure. Witnessed pneumatic inspection of reinforcing pad. Review DWR's of pipe spools and structural on daily basis. Inspects welded joints of work in progress and of completed structures/piping/pipeline trunks for visible weld defects, correct dimensions, weld sizes, type of weld etc., in conformance with approved drawings, and work order specifications. Verify traceability of materials during in process inspection. Verify alignment and dimensions of pipe spools. After visual acceptance of a weld, request for the required NDT of that welds as per approved weld maps and follow up with NDT to insure it is carried out and reported. Records inspection data. Raises NCR's for defective products or workmanship. Witnessing flushing, hydro-test of piping, verifying re-instatement of piping after completion of installation. Raising punch lists for incomplete works. Monitors welder's performance in shop and site.

Company: Belleli Saudi Arabia Limited

Main Contractor: Snamprogetti & Ansaldo Energia
Project: Power Plant & Desalination Plant (SWCC)
Location: Yanbu, KSA
Position: Welding Inspector
Date: March 1993 to February 1997

JOB DESCRIPTION:

Welding inspection on evaporator shell. Checking joint fit up, visual inspection of pipe spools in evaporator and boiler spools, welder's qualification, NDE request and coordinate with NDT coordinator. Weld visual inspection in water box of evaporator. Monitor PWHT activities. Carryout witness, inspection and surveillance checks in accordance with the Site Quality Plan and contractor inspection and test plans. Review of test circuit, punchlisting and hydrotest inspection. Witnessed air blowing and water flushing of line. Day to Day inspection of nitrogen purging of boiler. Conduct test circuit reinstatement for final mechanical completion and handover to client.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1516)

Go to Search Parameters...

Brief Description

Free! I have been a well site supervisor for the past 7 years for top companies in Canada / Duvernay Oil Corp / Shell International ( canada ). I have been working hard for the past 19 years to excel in the completion / workover / production, sector of the oil and gas industry.

Free! Geophysicist

Free! Knowledge and specialty in Versaclean Synthetic Oil Based Systems, Novaplus systems, Lignite/Lignosulfonate, KCL Polymer, Rheliant and Flo-Pro systems. Experience in exploration wells, directional, deviated, lateral as well as development wells. Experience with blowouts,and well control,

Specialist in geophysical projects management, data acquisition /processing, AVO studies (processing / seismic attributes and tomographic inversions) / mapping and interpretation; multilingual practitioner and self-starter with diverse professional experience/ skills

27-year career with Chevron, I was employed both as organic geochemist and petrophysicist. Experienced in openhole log analysis, integrating log and core data. Worked with all three major logging contractors. Experienced in LWD and wireline logs. Familiar with workstation and geolog.

E&P Geophysicist & Integrated Geoscientist (at Advisor/Senior Staff or Practice Manager level) immediately contributing Prospect Generation, Reservoir Seismo-Geology/ Seismo-Petrophysics, 3D Reservoir Modeling & Seismic/Sequence Stratigraphy enhanced with IT Applications; Strategy Mgmt, Risk Mgmt.

Qualifications: CPL/JD Skills: Due Diligence, Title Runsheets, Lease Take Off's, Ownership Rpts. and Lease Acquisitions.

Structural and stratigraphic interpretation of 2D and 3D seismic data

MS Geology; structural geology, prospect generation, basin analysis, petroleum systems, clastics, log analysis, field studies, Petrel, training, managment, recruiting

Security operations,Health and safety,HR Management,General and strategic Administartion

Over 20 years experienced professional petroleum geologist specializing in oil/gas exploration, development and production, 4 years into Business Development & Field/License Management Experience. Strength in Prospect Generation, Seismic Interpretation, Geological Modelling, Development Geology,

Masters in Geology from the Azerbaijan State Oil Academy, Baku, Azerbaijan. I have worked as a Geologist with Petrobangla (a government owned oil and gas organization of Bangladesh) from 1981 to 1997. I joined International Logging Inc. Houston, USA as a Formation Evaluation Geologist

Nautica/ DP Operations; Hurricane Operations; Survey/ Warranty Consulting; Marine Business Logistics

More than 20 years in technical and HSE field, Senior Management Position, Presently working as HSE coordinator for a Multinational Oil field company at Oman

A proactive and enthusiastic individual with 17 years of extensive expertise in the field of offshore positioning/navigation/geophyscial/pipeline/hydrographic survey.

Sequence Stratigraphy, tectonic, pre/post-stack seismic attributes, petrophysic, static reservoir modeling, fracture modeling

Qualification : B.Sc. Accounting and MBA Accounting and Finance. Experience : 18+ years experience in contracts and procurement (C&P) for oil and gas industry. Manages and executes all steps of the contracting processes, i.e tenderings to contract closures.

My strong background is in the reservoir characterization in both clastic and carbonate geology, well planning and execution, tar characterization, operations geology, and geosteering. Expert in Landmark geological softwares OpenWorks, Stratworks and reservoir mapping using Z-Map Plus.

I hold Master degree in palynology and currently Phd student doing research on ordovician silurian palynology

Working in oil and gas project for more that 15 years as a QC- Piping Inspector.

Supplier management, vendor development, startegic sourcing, procurement support, procurement management

Technical English instructor in oil and gas industry, rotational and residential; ESP, ESL and General English in a variety of countries; administrative/management experience as well as technical writing/translation and course writing; BA, MA and TESL cerified

26 Years land and project management experience

Revenue, Gas Accountant, Gas Balancing, Scheduling, Marketing

37 years in oil & gas land, seeking contract or perm, willing to relocate

Sr.Staff Geophysicist with more than 35 years of oil industry experience. Generated drilling plays in several basins around the world (Canada, Egypt, Oman, Libya, UAE, Cameroon (Offshore. Structural & Stratigraphic plays. Also overthrust belt experience in Oman & Foothills of Alberta.

Over 20 years of overall experience in geology, geophysics and operations with an emphasis on Seismic interpretation and reservoir modeling. Areas of strength are mainly in operation geology, seismic interpretation, Prospect generation & maturation, opportunity evaluation, reservoir modeling.

15 plus years of Rig and Merchant Naval experience with good administrative and communication skills as a Radio Officer/Purser/Fleet Administrative Officer on board foreign going vessels and rig. Have good experience in handling chopper program, boat program, material movements, crew changes, crew t

Sr. Technical Writer with Software, O&G expeience, PMP Cert

I am proficient in researching title and court records, including but not limited to conveyances, mortgages and other indexes, along with curing said title when needed. I am able to determine from said title or records mineral and/or surface ownership in Louisiana, Mississippi, Alabama and Texas.

Have more than thirteen years of experiance in log interpretation

Free! Background and extensive experience in HES regulatory requirements through all stages of execution in major capital projects including Concept Design, FEED, Detailed Design, Construction / Fabrication and Hookup and Commissioning. Have 28 years of experience in the oil and gas industry which also i

Visual Foxpro RDBMS Programmer LAN Environment / Technician / CAD 3D Designer

Results-driven manager in diverse supply chain, purchasing and sourcing areas.

20 years of experience in safety profession both in onshore construction and marine construction.

Landman, Title, Leasing, GIS and CAD Experience,

International HSE Drilling advisor

I am NACE Certified Coating Inspector with ASNT level II Mechanical Engineer, Chemical Technologist, Science Graduate, Masters degree in Management, with 6 years experience in the middle east in Petrochemcial industries

Extensive experience in the field of HSE and Logistics with both National and International Oil and Gas Operations. These experiences include Drilling/Production/Refining through to HSE Advisory/Consultative roles at Contractor client locations.

With my dedicated experience as a Directional Drilling Supervisor for 14 years.I have worked in Western Canada, Mexico and Middle East.

A professional individual with a strong background in health, safety and environmental research and policy implementation. An extensive career with experience in rig-operations and positions ranging from Floorhand to Directional Driller with an emphasis on loyalty and confidentiality.

Experienced land professional with a strong background in all phases of petroleum land management. Proven expertise in a variety of situations, as well as proven leadership skills as demonstrated in Land Manager positions with two companies and as an independent lease broker utilizing the services

Monitoring and surveillance of QC activities in fabrication shop and field for CS, LTCS, ALLOY, SS, LTSS, Claded steel material

Medical doctor

A TWI certified and registered welding inspector (CSWIP 3.1) and worked as Field Piping Engineer with fourteen (14) years extensive experienced in oil and gas construction projects, refineries, gas plant, GOSP, power plant and desalination plant. Major activities involved general oversight of the

I am a B.Tech (Production Engg) graduate with Nace certified Level-I coating inspector, I have more than 16 years exp in various fields including 8 years in coating field. Also I was handled various pipeline projects in oil & gas field for 5 years

Geophysical modelling Rock physics, AVO, Pre-stack and Post-Stack Seismic Inversion, seismology, reservoir characterization, Interpreted seismic data (3D, 2D) & amplitude analysis using Seisworks, PostStack/ PAL, IESX, and EarthCube. Certified Landmark Graphics instructor

field appraisal, depletion, material balance, well test, reserve estimates, water injection, fractional flow, gas injection, reservoir evaluation, production forecast, reservoir and production monitoring, data acquisition, multilaterals, development projects, reservoir modelling and simulation.

Trained Radiation Protection Officer & Health Physicist from India

Applying for the post of HSE CO-Ordinator

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out