Resume - Electrical-Mechanical Engineer graduate from National University of Engineering ...

Misco Jobs

Resume #87051

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in working as a team member and decision making, strong character and disposition to face challenges and proactive in fulfilling project objectives under pressure.
------------

OBJECTIVE:
------------
Being involved in Projects Construction's Contracts Administration, Engineering on site, precommissioning and commissioning in the electrical area, using the best engineering practices, complying the regarding international standars and being updated in new technologies

WORK EXPERIENCE:
------------
PLUSPETROL PERU CORPORATION S.A. Mar. 2004 – Feb 2005
Jun.2005 – Present
Improvement and Modifications Projects Area, Lima
Projects Engineer, Junio. 2005 - Present
I provided engineering support in the Pluspetrol Main Office in project execution and control in the areas of piping, electricity, facilities, instrumentation, etc corresponding to plant improvements at the Malvinas Gas Plant and Fractionation Pisco Plant.

My duties include coordinating with engineering companies and revision of deliverable documents. I belong to the Project Proposal Team, reviewing project proposals from the Plants, elaborating and reviewing bid packages and evaluating project scope of works with competing construction companies.

Nowadays, I`m the Contract Administrator of the EPC project: Installation of Condensate Dehydration Unit at Malvinas Gas Plant. By the end of the project`s execution, it will have cost approximately $ US 15'000,000.

Maintenance Area, Malvinas Gas Plant – Cuzco and Pisco Fractionation Plant – Ica, March 2004 – Feb 2005
I was responsible for the organization and implementation of the Project Master File (Technical Information File) at both site locations of the Upstream Camisea Project and Pisco Facility. I also provided support in materials selection, generation of service orders by means of the JD Edwards and Maximo V. 5.2 software.
The "Master File", consists of printed and digital versions of Operation and Maintenance Manuals, Manufacturers Data Books, Commissioning and Pre-Commissioning Files, Procedures, Data Sheets, As-Built Engineering Drawings, Catalogues, Pipeline Drawings, etc.

MINISTRY OF AGRICULTURE Nov. 2002-Jan. 2003
July 2003- Mar. 2004
Regional Directorate of Piura, Department of Piura
Heavy Machinery Field Supervisor
Heavy Machinery Field Supervisor responsible for field corrective and periodical maintenance checks and overhauling of machinery.

Agricultural and Heavy Machinery Program - PMAAP, Lima
Production and Maintenance Engineer
I supported Maintenance Management in agricultural and heavy machinery using the Equipment Maintenance System, SPRING.

URSUS TRANSPORTES S.A. Jan. 2003 –Apr. 2003
Maintenance Area, Callao.
I worked in Maintenance Management of Enterprise Equipment: trucks, vans and other vehicles. Programming work orders, support in material's selection and pre-requisites for purchasing, utilizing MP2 software.

CONSTRUCCIONES CIVILES Y ELECTROMECÁNICAS S.A. Aug. 2001- Oct.2002
(CONCELSA)

Projects and Works Area, Lima
As Field Engineer on site; I was responsible for project execution of and follow-through of project completion. I developed electrical design drawings of electrical distribution for the facilities (i.e. low and medium voltage networks, public lighting facilities, utility systems, etc.)

LUZ DEL SUR S.A.A. Aug. 1998 –Apr.2001
Project Engineer, Quality Project Area, Distribution Department, Service Center Vitarte.
I was assigned to a number of projects related to the improvement of quality in public lighting facilities and low voltage electrical networks. I participated in electrical fault analysis of substations and circuits of medium voltage electrical networks.
Responsible of the Program: Public Lighting Quality Projects, Service Center Vitarte - 1999.

Project Engineer, Projects and Works Department, Service Center Vitarte.
As Project Engineer of the electrical distribution projects and on site supervisor I was responsible for building contractor personnel and follow-through of work completion.
I was responsible for the Massive Electrification Program - 2002, Service Center Vitarte.

OCCIDENTAL PERUANA INC. Jul. 1997 Jul. 1998
Pre-professional practices in the Planning Section, Maintenance Area, Andoas - Perú.
I worked with the Maintenance Management Team using TMS software, of Enterprise Equipment: Diesel engines, generators, heavy machinery, Nissan vans, oil and gas compressors, pumps, plant equipments for crude oil processing, power transformers, transmission power lines and others.
I assisted in the implementation of the Predictive Maintenance, material selection and procurement using logistics software OPICS.

HUARON S.A. MINING COMPANY Jan. 1997 - Apr. 1997
Pre-professional practices in the Maintenance Area, Francois - Pasco, Perú.

I worked with maintenance and installation of electrical outdoor and indoor facilities, evaluation of substations, start-up of panel board ventilation systems, etc.

EDUCATION & CERTIFICATION:
------------
Universidad Nacional de Ingeniería 1993-1997
Graduated as Mechanical-Electrical Engineer. Upper Fifth

Universidad Nacional de Ingeniería 1990-1993
Studies at Mathematics School, Sciences Faculty. Upper Fifth

Instituto Cultural Peruano Norteamericano ( ICPNA ) 2000-2003
Advanced Studies in English.

Instituto Cultural Peruano Norteamericano ( ICPNA ) Oct 2003 – Mar 2004
Advanced Course in English Speech

Centro de Idiomas de la Universidad del Pacífico ( CIDUP ) Ene 2008 – Mar 2008
TOEFL IBT Course

Centro de Idiomas de la Universidad del Pacífico ( CIDUP ) April 2008 – June 2008
IELTS I Course

Centro de Idiomas de la Universidad del Pacífico ( CIDUP ) April 2008 – June 2008
Grammar I Course

ADDITIONAL INFORMATION:
------------
AREAS OF INTEREST
Projects Construction's Contracts Administration, Engineering on site, precommissioning and commissioning in the electrical area, using the best engineering practices, complying the regarding international standars and being updated in new technologies

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1520)

Go to Search Parameters...

Brief Description

Machinist,C.N.C. / Manual 20+yrs. experience

Roughneck, Roustabout, Rigger, Rig Clerk, HLO

Poovan Ganason 29, Prsn Jelapang 21, Taman Silibin Mewah, 30100 Ipoh Perak. Dear Sir, RE: APPLICATION FOR THE POST OF ENGINEER With reference to the matter, I wish to apply for the post mentioned above. I'm a Diploma holder with Bachelor of Science ( Honors ) in Mechatronics Engineering.

With my solid background, in both finance and systems I am well positioned to address and implement systems control for all data maintainance. Having a proper understanding in the transfer of information of sub to general-ledger, using JDEdwards, I have the ability to extract and design reports.

Well-rounded background in planning and scheduling. Experienced user in project control software applications such as Primavera P3 and Microsoft Project. Extensive knowledge and experience in all Microsoft Office applications. Adept at analysing detailed low level project control data and trans

Construction Engineer/Construction Specialist/Electrical Specialist/Construction Manager

22 years heavy equipment operator

Experienced professional in Accounting

Sales, Marketing,Business development,Automobiles, Spare Parts, Lubricants, ,Pipes, Construction Machinery,Trucks Concret Pumps, Tyres etc.

HSE

Materialsman/Coordinator with 10 year experiance of oil field, Supply base, Offshore Rig and Land Rigs

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

I have over 10 years as a driller and derrickhand

Technical Writing with 15 Years of Experience in the UAE

Procurement, Supply Chain and Logistics professional spanning industry sectors on global basis

I am a young man who has worked hard all and received little for his efforts, and what I have received is gone. I am looking for a new start in a new line of work that is more profitable than those jobs I have had in the past.

Radio telecommunications operator based in Amman/Jordan , have various work experience in coastal radio stations, on ships board, united nations . total experience over 5-years . Looking for good opportunity in oil/gas offshore, onshore projects : world-wide as RADIO OPERATOR

Title of qualification awarded Bachelor of Science in Physics Name and type of organisation providing education and training Universidade do Algarve, Faro, Portugal

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

Previously worked for a oil and gas brokerage firm in Houston, Tx at the end of 2008. Experience as leasing agent and experience in running title in Texas.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Procurement/Supply Chain Manager experienced in Oil & Gas operations (South America). Contracts negotiation and administration, excellent leadership skills and broad knowledge of local vendors. International logistics experience.

10 Plus years Developing and maintaining EPC Schedules Utilizing Primavera Softwares

Driver, teacher, maintenance computer, air conditioning and electrician

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Consultant, Control Risks; Formerly Country Manager, Nigeria, The Olive Group, Chief of Security, diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in work

3+ years experience in Oil Gas Document Control on long term Offshore/Onshore projects, dealing with contractual & subcontractor/vendor documentation Seeking a contract position, min. term of 6 months in a progressive position that will allow me to move into the field of Document Control Management

I have 12 yrs cementing experince in UK and worldwide with the same company working with different Oil companies. I also have well-bore cleaning experince for 2 years. I have dealt with Mud, brines and different cemeting fluids.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

PDMS and AUTO-CAD programe

IT/Business/Analytical professional with experience in the Gas, Safety, and Welding industries as well and inventory planning and forecasting in the auto industry.

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

11 Years experience in oilfield

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Experienced Property Manager and Landman

Security Officer, Gold mine experience. Security, Explosives and Drug Dog Trainer/Handler

Ellipse Business Analysis Skills in the Area of Asset Management, Work Management, Purchasing, Warehouse, Catalogue, and others.

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Experience in Drilling&Well completion and Knowledge in IWCF&IADC with speaking 4 languages fluently

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

My qualifications are reinforced by over 20 years as a front line supervisor in the construction, rejuvenation, revamp of Oil and Gas, Petrochemical and Nuclear Power Plant Projects specifically in the field of Insulation Works.

A Buyer /Expeditor with 18 years Gulf experience

I am a hardworking and honest person looking to have a new career in the oil industry. I am dedicated to my work and would be a good employee.

Pip in indistrial safety, working in ministry of elec & water ,kuwait.

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out