Misco Jobs
|
Go to Job Seeker's Center »»
|
Search Results (Resumes 3201 to 3250 of 9905)
Go to Search Parameters...
Brief Description
Expediting Manager with 40 plus intermediate and senior Expeditor's with experience ranging from 250M - 5.6B Oil & Gas Projects.
Mech/weld inspector, I have held c.s.w.i.p. cert for 22 years ,5 year time served boilermaker apprenticeship, presently working on the Qatif gas oil separation plant Saudi Arabia as senior mech/weld inspector
A career in oil and gas production and operations with the preference of supervision of personnel who installs and maintains automation, production, or measurement equipment for the oil and gas industry. I am enthusiastic about working in foreign countries.
SAP PM Consultant, having in-depth knowledge of both SAP-PM and Pacer-M.
PROFICIENCIES: Practical knowledge of Preventive Maintenance, Vibration Analysis, Oil Analysis, Non-Destructive Testing, and Laser Alignment. Knowledge of rotating equipment, bearings, lubrication. Knowledge of MS Office and various CMMS. Good verbal, writing and interpersonal skills.
I have been a roustabout, well technician and Pumper, Pulling unit floor/derrick hand. I am very familiar with several aspects of the oil Industry including laying pipeline, painting, installing electrical components, reading various types of meters and computer literate.
I am a Petroleum Engineer with divers experience of almost thirteen years in Oil and Gas industry. Notably my experience includes planning and supervision of field operations like BHP survey, logging, daily production operations and workover
I have 30 years on drilling rigs land, barge, and jack up's the last 3 as a drilling & work over consultant.
20+ years North American oil & gas procurement, inventory, logistics and contracts administration.
Dear Sir/Madam, I am an experienced offshore Rig Electrician. Please find enclosed, my resume for your consideration.
I am I have worked extensively on both land and offshore rigs. I always try to perform my job to the best of my ability, with safety to personnel as my #1 goal.
I had more than 20 years experience in Gas Processing plant, previous company I worked for LNG Plant and last position as Utilities Senior Operator and Present company I have been working for Gas Processing as field operator.
Resume CV: To join an offshore drilling company as Rad. operator, Logistics Coordinator any place in the world
I would prefer to work as Commissioning Supervisor in the Middle East.
Objective Production engineer, oilfield engineer, or mechanical engineer in a contracting firm.
Dear Sirs, I am 33 yrs. old, from Romania, Electrical Engineer. I would like to get a job in electrical/administrative petroleum/oil/gas field. Even I've have a Diploma in Electrical field I can accept to work as electrician, technician, foreman, or engineer.
20 years experience in non-destructive testing and inspection as a technician, radiation safety officer, division manager, and project manager.
Maintenance of: - Simovert - frequency regulation for the speed control of High Power asynchronous motors 450 KW and 110 KW - Frequency regulation for the speed control of Low Power asynchronous motors - High Voltage switchgear equipments - MCC - Switchgear equipments - Low Voltage -ETC...
I 'm Canadian citizen, I have second class marine engineer.
25 years of experience all over the world in the instrumentation field including 12 years offshore oil platforms, erecting, construction, precommissioning , commissioning and start-up a wide range of pneumatic, hydraulic and electronic instruments, DCS – ESD – F&G systems.
Process Engineer
I accumulated 22 years of experience in the oil industry, most of the time with the Schlumberger service company in the area of Oilfield Services management, Reservoir Evaluation Wire line and Testing.
Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.
WORK EXPERIENCE I have 14 years of experience in plant F.C.C ( Fluid Catalic Craking ).Refinery El Palito in Venezuela ( PDVSA ) and experience in Pre commissioning
I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.
26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.
Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.
Curriculum Vitae „h Over 25 years of oilfield experience in Canada „h Mechanic on a seismic crew until tools were stolen „h Roughneck to driller, 11 years as a driller on a drilling rig „h Owner/operator of a vacuum truck business „h Mechanically inclined
BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.
OVER THIRTY YEARS EXPERIENCE AS A FULLY CODED WELDER ALONG WITH FOREMAN, SUPERVISER AND WELDING ENGINEER/CHIEF WELDING ENGINEER POSITONS ALSO UNDERTAKEN ALONG WITH NORMAL WELDER POSITION.
Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.
Well Testing Supervisor
Operate, commission and monitor equipment in assigned areas, maintaining parameters with the guide lines of the operating manuals and procedures of 80,000BPD three phase separation multi train crude separation units, 110 MMSCFDgas compression& treatment plants
Strategic Planning Business Development Project and Business Valuation
qa/qc engineer or inspector
I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.
To become a successful Planning Professional in a professionally managed
Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.
Nobody has climbed up through the steps of success with his hands in his pockets.
involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.
Piping design, PDMS modelling (design,darft ,iso draft)
6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.
Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours
Working with Kuwait Petroleum Corporation for more than 3 years, Masters in Eng. Literature, Good in Ms. Office, Excellent communication skills, hard-working, organized,multitasked, can work under pressure, good teamwork, maintains confidentiality of work, good analytical skills.
I am skilled in material and inventrol control and will be glad to serve in such environment.
B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.
Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar
PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator
I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC
Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*
First
Prev
51
52
53
54
55
56
57
58
59
60
61
62
63
64
[ 65 ]
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Next
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com