CONTACT INFORMATION:
View contact information...
Dear Sir,
I would like to apply with your company for the position of Control System Engineer / DCS Engineer / Instrumentation Engineer. The attached resume covers my 8 + years of Field instruments and Control automation (DCS) experience and outline my abilities as an engineer with the leader ship quality.
I am seeking an employment. Should you have opening in your organization for a person with my qualification, or shall be anticipating one in near future, I would very much thankful to meeting with you for a personal interview to discuss my abilities and skills gained in the past experience to full fill your requirement and expectations.
Here with I listed my skills for your ready reference.
* Total years of experience – 8 years and 9 months in Yokogawa DCS & Field instruments. Having good knowledge on Instrumentation and control, DCS equipments.
* Educational Qualification - Bachelor of Engineering (Electronics and Instrumentation Engineering).
* Yokogawa DCS (CS3000, CS1000, Centum CS, Centum XL & Micro XL) ON-LINE system maintenance, graphic, control drawing, logic, sequence modification & implementation, control loop addition, new hardware addition, loop tuning, loop checking, PLC, SCADA - DCS communication, trouble shooting, periodic, preventive & shutdown maintenance and alarm analysis.
* Field Instruments (Pressure, Temp, Flow & Level transmitters and instruments, Control valves & Valve actuator, single & multi loop controllers, data acquition station (DAQ), recorders and analyzers) – Selection of instruments, erection, commissioning, startup, calibration, maintenance, troubleshooting and technical support.
* Interpret Piping and Instrument diagram (P&ID) and SAMA drawing. Having knowledge on ANSI/ISA 5.01.01 symbols and diagrams.
* Knowledge on Fieldbus (Foundation Fieldbus), Lube oil refining process and ISO 9001.
* Training attended at Yokogawa, India for CS3000 / CS1000 DCS engineering, operation and maintenance, Centum CS, Centum XL & Micro XL DCS operation and maintenance, Field instruments configuration and maintenance. Foxboro I/A series DCS training at Invensys, India. Various Field instruments training at Forbes Marshall and Fluid Control and Research Institute (FCRI), India.
* Software Knowledge on UNIX (user level), Microsoft -Windows XP, 2000 & NT 4.0, Packages such as MS Office, Visio, PI-Process Information System (user level) and Yokogawa Exaopc & Exaplog (Event analysis) packages.
Date of Birth: 30th July 1973
Marital Status: Married (Wife + 2 Sons)
Educational Qualification: Bachelor of Engineering (Electronics and Instrumentation),Tamilnadu College of Engineering, Tamilnadu, India.
Total Experience: 8 years 9 months (Field Instrumentation and Yokogawa DCS)
Passport Details: Passport No: U – 765072
Date of issue: 06/09/1995, Date of Expiry: 05/09/2005
Nationality: Indian
License: Valid Indian Driving license.
Software Knowledge:
UNIX (user level), Microsoft -Windows XP, 2000 & NT 4.0, Packages such as MS Office, Visio, PI-Process Information System (user level).
Professional Experience:
I. Current Employer: M/s. JAL INTERNATIONAL CORP, SAUDI ARABIA
Job Title: DCS Engineer
Start date: 21/12/2003
End date: Present
Posted at: SAUDI ARAMCO - LUBEREF II, Yanbu, Saudi Arabia as a DCS Engineer.
Job Description:
* Handling of Yokogawa Centum CS DCS system, Exaopc & Exaplog (Alarm management system), ESD (August PLC - Emergency shutdown system), BMLS (Burner management logic system) and SER (Ronan Seq. Event Recorder).
* ON-LINE system maintenance, Graphic(MMI), Control drawing, Logic & Sequence modifications, control loop addition, Loop tuning, new hardware addition, PLC, SCADA - DCS communication, trouble shooting, Periodic & Preventive maintenance and Alarm analysis.
* Planning maintenance activities – periodic, preventive & shutdown, Preparing planned maintenance schedule for control system and instrument loops & equipments, Report preparation on maintenance.
* Implementation of management proposals regarding all control scheme modifications.
* Coordinating with Project & Instrumentation regarding Sale Gas, Used Oil, Raffinate Loading, SAAB tank Radar gauging system communication to DCS and Compressor PLC to DCS communication projects.
* Interfacing Subsystems (Substation SCADA, HTG & RTG Tank gauging system, flow metering skid (Propane, Ethylene etc.) with Yokogawa Centum CS DCS.
* Reviewing the new control system installation, drawings, project related documentation, equipment spec, testing and commissioning procedure.
* Upgrading old system with new one.
* Coordinating with Operation and Technical team to improve the control logics, implementation of engineering recommendations and alarm management analysis.
* Coordinating with vendors and implementation of vendor recommendations.
* Planning & Procurement of required spares to ensure trouble free operation.
II. Previous Employer: M/s. YOKOGAWA BLUE STAR LTD, INDIA
Job Title: Executive – Customer Service (Regional Coordinator)
Start date: 04/10/2000
End date: 12/12/2003
Job Description:
* Handling of Yokogawa DCS systems (CS3000, CS1000, Centum CS, Centum XL and Micro XL) and all Yokogawa make field instruments such as pressure, temp, flow transmitters, controllers, data acquisition (DAQ) stations, recorders and analyzers.
* Technical support, On-line graphic(MMI), control drawing, logic modifications, addition of new hardware, trouble shooting, erection, loop checking, commissioning, start up, calibration, annual maintenance, shutdown maintenance, periodic & preventive maintenance, remote maintenance support and conducting brief trainings.
* Manpower allocation, Customer complaint register maintenance & logging, Document maintenance, ISO9001 activities and Prepare monthly activity report on regional basis to management.
* Interfacing Subsystems (PLC, SCADA, etc.) with Yokogawa DCS.
* Coordinating with customer to resolve the problems, providing engineering recommendations and test procedures.
* Providing Control system hardware, software and networking solutions.
* Reviewing the new control system installation, drawings, project related documentation, equipment spec, testing and commissioning procedure.
* Training to clients and Promoting Yokogawa products.
III. Previous Employer: M/s. FORBES MARSHALL LTD, INDIA
Job Title: Senior Engineer – Customer Support
Start date: 03/01/1996
End date: 03/10/2000
Job Description:
* Handling all type of field instruments (Pressure, Temp, Flow and Level), Control Valves & Valve actuators, Single & Multiloop controllers, Moore APACS DCS and analytical instruments.
* Selection of Field Instruments to suit for the application.
* Erection, Commissioning, Start up, Calibration, maintenance and trouble shooting for all type of field instruments.
* Handling ETP, Water treatment projects for Field instrument erection and commissioning.
* Coordinating with customer to resolve the problems, providing engineering recommendations, test procedures and solutions.
* Training to clients and Promoting Forbes Marshall products.
Additional skills:
* Knowledge on Refinery Lube Oil processing (Vaccum distillation, Propane de- asphalting, utilities – Boiler, Compressor, Tank gauging, flow metering,& Blending)
* Interpret Piping and Instrument diagram (P&ID) and SAMA drawing.
* Having knowledge on ANSI/ISA 5.01.01 symbols and diagrams.
* Knowledge on Fieldbus (Foundation Fieldbus).
* Knowledge about ISO 9001 procedures.
* Mass flow meters commissioned in various industries in Custody transfer application. Received appreciation letter from Forbes Marshall Ltd, India.
* Participated in Customer support skill development competition and won the award from Yokogawa, India.
Trainings Undergone:
1. CS3000 / CS1000 DCS Engineering, Operational & Maintenance Training (5 days) at Yokogawa Blue Star Ltd, India.
2. Centum CS, Centum XL & Micro XL DCS Operational and Maintenance training (10 days) at Yokogawa Blue star Ltd, India.
3. Deputed as Residence support & Maintenance engineer for Centum CS DCS at Mangalore Refinery (MRPL), India for 2 months.
4. Various field instruments training (12 days) at Yokogawa Blue star Ltd, India.
5. Windows NT and Windows 2000 training (6 days) at STG, India.
6. Industrial Flow Measurement Training (3 days) at FCRI, Palakkad, India.
7. Special training (5 days) on Magnetic, Mass and Vortex flow meters at Forbes Marshall, Pune.
8. Control valve basis, selection and sizing training (5 days) at ARCA controls - Forbes Marshall, India.
9. Various Field Instruments Training (21 days) at Forbes Marshall Ltd, India.
10. Short-term course (15 days) on FOXPORO I/A Series DCS & TRICONIX PLC at M/s. Siebe India Pvt. Ltd (Invensys), India.
View contact information... |