Resume - I would like to apply for a entry level position as an engineer in the petroleum...

Misco Jobs

Resume #1043

CONTACT INFORMATION:
View contact information...

Objective
Seeking an entry level position into the petroleum industry.

Education
M.S. Petroleum Engineering
CGPA: 3.78/4.0, Expected graduation May 2002
Thesis: Log analysis of carbonate reservoirs using neural networks and
fuzzy logic tools. New Mexico Tech, Socorro, N. M.

B. S. Chemical Engineering (August 1996 - May 2000)
Petroleum Engineering as specialization CGPA: 3.54/4.0
Andhra University, India.

Work experience
Reservoir Evaluation and Advanced Computational Technologies Group
Petroleum Recovery Research Center, Socorro, NM, USA (December 2000 - present)
Petroleum engineer with two years experience as a research assistant. Worked in reservoir simulation, well logging, production, drilling and gas hydrate projects. Experienced in reservoir simulation, formation evaluation with well log analysis, and field studies of various naturally fractured reservoirs and stresses involved.

Responsibilities include estimating future well performances of the Dagger Draw
field, located in South-eastern New Mexico by performing reservoir simulations
using artificial intelligence and fuzzy logic, core data and well logs from the
existing wells, developing log correlations within the formation and determining the proration interval for the redevelopment of the field. This research paper has been selected for the 2002, Society of Petroleum Engineers Annual Technical Conference.
SPE 77330 "A New Method of Calibration Wireline Logs with Carbonate Core Measurements to Recognize Pay Zones."

Department of Petroleum and Chemical Engineering
New Mexico Tech, Socorro, NM, USA (Fall 2000)
Teaching assistant for thermodynamics at New Mexico Institute of Mining and Technology. Worked on a project for the separation of hydrogen sulfide from natural gas using the formation of hydrates as a separation technique at low temperatures.

Project Trainee
Vishakhapatnam Steel Plant, India. (December 1999 -April 2000)
Chemical engineer with nine months experience as project trainee. Designed a prototype Separation Column for the manufacture of benzene from crude benzole. Worked in different projects involving heat transfer, mass transfer, process dynamics and control, fluid mechanics, and chemical reaction engineering.

Skills
Formation evaluation analysis/correlation of logs.
Predictions of long term reservoir performance.
Horizontal and under balanced drilling techniques.
Analysis of Production and Well Test Data.
Worked with simulators including DROPS, Surfer, and Apprentice.
MS Office: Word, Access, Excel, and PowerPoint.
Web design using HTML, XHTML and Java script.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7051 to 7100 of 9905)

Go to Search Parameters...

Brief Description

Construction & maintenace of installations, equipment and systems in hazardous areas (explosive gas atmosph.); Maintenance of el. equipment, installations in petrochemical industry.& el. Equip., systems in El.Power Plant ; Training el.personnel for preventive & predictive el. maintenace programs

Senior Project Management, Profit and Loss, Project Planning, development and execution. Consultancy in the areas of safety, risk management, and techncal writing and editing. Major contract administration for a multi-national firm in Saudi Arabia on two different assignments.

PDS/piping engineer

A dynamic and energetic B.S. in Petroleum Engineering, experienced in drilling and well completions, with a solid technical background and excellent communications and organizational skills. Able to interact effectively at all company levels, from field personnel to top management.

8 Years working experience as a `Piping Draughtsman / PDMS Designer’.

I Know SmartPlant P&ID Software, 2D Auto Plant, Microstation, Acad Rel14-2004

My job basically involves mainly the operation of Microstation and PDS since I am in-charge of the 3D modeling in most projects. Also I'm involve in making civil drawings and plans using either Microstation or AutoCAD. I'm also knowledgeable in the operation Smartplant Review for checking 3D models.

Certified as PCN ultrasonic testing level II in Plate,pipe,nozzle and node(3.1,3.2,3.8,3.9), PCN Welding inspection 3.1 and ICORR Painting Inspector Level I

Proficiency in applied mathematics, thermodynamics, well test analysis, fluid flow, horizontal wells, calculations of well reserves, reserves evaluations, thermal recovery, mechanical designing, drawings, engineering calculations and evaluations

Ability to understand and learn new computer programmes accurately and quickly, Strong organizational skills, Ability to work under stressed conditions, Ability to work in multi-task duties, Excellent communication skills

Subsea, materials, administrative, operational, on shore or Off Shore.

Chemical Engineer- Petroleum Industrial Processes Design

M,TECH-instrumentation& control- 1 division, B.TECH-electronics & instrumentation -1st division

Seven (7) years of experience in Electrical Engineering with expertise in Oil & Gas EPC (Engineering, Procurement, Construction & Commissioning) Projects and Project Management.

LWD/MWD Eng. Since Jun 2000, Having Worked on both, offshore & on shore Rig

Reservoir Engineering studies, Driling, Workover, and completion aspects related to depleted reservoir / salt dome storage wells

I'm a very hard working, and self-motivating person. I enjoy a challenging and rewarding job that utilizes my skills. I am a person who loves a challenge, and bring solutions to the table for difficult situations.

This is a history of my past employment.

Please Look closely at my Resume I am in Dire need of a job and will relocate immediately for a job.

Fresh chemical engineer with Industry experience of the best environment Proficiency in important computer software Good communication and inter-personal skills •Willing to relocate anywhere and learn new technologies

A position in a results-oriented company that seeks an ambitious and career conscious person. Highly skilled in all types of computer related work. Have all necessary oilfield tickets, BOP, H2S, First Aid, Etc.

Title search, leases, easements, damages; designed documents, databases; due diligence; review maps and plats; railroad and road permits; exp with Bureau of Indian Affairs; Supervisory. Worked in South Texas, Illinois, Wisconsin, Michigan, Minnesota, Nebraska and Oklahoma

Geology MSc graduate looking for experience in the oil industry. Principally looking for roughneck-type work leading on to more rewarding and challenging positions. Am willing to work off-shore as well as on-shore and am willing to relocate anywhere other the globe.

gas oil jobs descriptions

looking for a job in engineering field

job in geology

Account Management. Contract negotiation with clients, proposal preparation and follow up. Market analysis and account development identifying prospective customer needs and developing innovative solutions to satisfy their requirements

I would like to apply for a entry level position as an engineer in the petroleum industry.

Almost 6 years relevant experience in Instrumentation Technology. Having experience in refineries, Petrochemical Plant, Fertilizer Plant & Oil & Gas Plant.

Seeking for an entry level position.

I'm a qualified Aircraft Autopilot maintenance engineer, seeking a challenge in the oil industry. I would like to challenge myself, working with all electronic and related fields.

3rd Class Power Engineer

i am working in the field of painting for 9 years mainly in in application and inspection

industrial maintenance mechanic/millwright ( red seal ) any thing mechanical ,some electrial

Skilled pump technician w/ 4 yrs experience building & repairing down hole pumps incl. insert & tubing pumps. Completed training for field repairs and pump certification (Levels II - well operations & Level III - pump mechanics). Hard-working, good attention to detail. Excellent evaluations.

I am a fresh graduate from the Jordan University of Science and Technology. I have a bachelor's degree in Mechanical Engineering with a minor in Mechatronics Engineering.

GIS Packages: MapInfo Products, AutoDesk Products, ArcGIS,

Well versed in P3e, P3 and MS Projects with very good knowledge of spread sheets and MS Access database. Have experience of Petrochemical, Oil & Gas and Chemical Projects. Have also seccessfully executed few projects as Project Manager.

Highlights of Qualifications: Diploma in Electrical Engineering from Maharaja Sayajirao University of Baroda, Gujarat, India. Registered license holder of Industrial Electrician from Ministry of Training colleges and University, Ontario, Canada (Licenced 442A), Applied for C.E.T. certification to OC

Ten years with major Oil and Gas company; managing,planning ,tracking drilling and completion operations up to 100MM$ AFE. High expertise in Contractual Strategies (Incentived Contracts, Risk reward) Areas of experience are worldwide Off Shore and On Shore.

About Ten years experience with engineering of Oil and Gas project (Process Platform & Well head Platform), Electrical Substation, HV/MV/LV apparatus switchgears/ MCC, MV/ LV Motors, power supply unit, UPS control equipments, Electrical on Mechanical Package (Gas Compressor, Fire Water, Gas Turbine)

Oilfield Supervisor fracturing high pressure

5 years with schlumberger oilfied sevices company as high pressure pump operator

Instrument Tech that is capable of working on most end devices and bend 1/4" to 1/2" SS Tubing

To join a competent and reputed organization and exhibit talent to be promonent as an excellent professional engineer

Oil Field Inspection Specialist (30 year career), experienced in all aspects of plant equipment inspection: Pressure Vessels, Gas fired and Waste Heaters, Tankage, Piping, Pipeline, PSVs, Offshore Platform structures & Cranes. Skilled in Risk Based Inspection & Equipment Strategy procedures.

To acquire a technical/management position where engineering experience and managerial skills will significantly contribute to use the skills obtained through my experience and qualifications to benefit my employer and grow my self with organization.

MASTERS - Mechanical Engineering – [GPA: 3.6 / 4]

BE Chemical with more than 5 Yrs of Experience in Water treatment industries and also Petrolium Industries.

Structural Engineer with broad knowledge on design and analysis of Buildings (concrete and steel structures). Full knowledge in using Computer aided design Software such as Etabs, Staad pro, Prokon, Sap2000, CSI Safe, Xsteel, AutoCAD, Microstation, and other Computer programs (MS Office Word, Excel,

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 [ 142 ] 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out