Resume - Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

Misco Jobs

Resume #10733

CONTACT INFORMATION:
View contact information...

JOB OBJECTIVE
Senior level assignments in overall management of Control & Instrumentation Projects.

SUMMARY OF SKILLS & EXPERIENCE
* Over 20 years of rich experience in Project Management for turnkey projects dealing with design, engineering, execution and maintenance of DCS and PLC based controls & instruments in India & abroad.
* Expertise in DCS point definition and configuration, I/O channel assignment, interconnect wiring design, graphic display configuration, programming, factory acceptance test, commissioning and system verification and site acceptance test.
* Extensive experience in end to end execution of projects viz., Gas Sweetening, Sulphor Recover, L.P.G. Gas Compressors, DCS & PLC based instrumentation, SCADA Systems and other Field Instrumentation Projects.
* Exposure to implementation of Total Productive Maintenance practices and ISO 9002, QS 9000 quality standards.
* M.E. (Elx.& C) from University of Rourkee.

SPECIALIST IN FOLLOWING SYSTEM:
1. Honey Well DCS Tdc-3000
2. Yokogawa DCD System
3. Bailey Network-90 System (DCS&Pl C)
4. Allen Bradley PLC System
5. Yaskawa PLC System (Shutdown Control And Instrumentation
6. Microvax-3400 System
7. S3 Software Texas Instrument System.
8. Micromotion Flow Measurement System.
9. Design & Engineering (Preparation of Specifications, Data Sheets, Equipment Sizing And Selection, Bid Evaluation And Inspection, Installation And Commissioning Support Of Control And Instrumentation System.
10. Fisher Rosemount System (DCS & Field Instruments)
11. Specialist in Solar Gas Turbines, Ruston Gas Turbines, GE Gas Turbine, Siemens Steam Turbine, American Shack Boilers, Hitachi Boilers, Cogeneration Plants.
12. Offshore Oil & Gas Equipments in Production Platform.
13. SCADA System.
14. DCS-ABB-BAILEX – Symphony.
15.IQ-Actuators, ENRAF Level Transmitter, DELTAV-DCS

ORGANISATIONAL EXPERIENCE
Since July 2004 Pertrofac Instrumentation Supd.
AGT CROSS COUNTRY PIPELINE PROJECT

April 2001to July 2004
Sudelettra Nigeria LTD., Nigeria Sr. Project Manager
Port Harcourt (Oil & Gas Project)

March 2000 to March 2001 Hyundai Con.&Engg.Co.Ltd. Dubai
I&C Engineer (DCS)

Dec' 1996 to Oct'1999 Alexandria Carbon Black Alexandria, Egypt Manager

May 1981 to Dec'1996 Oil & Natural Gas Corporation (India) Superintending
Engineer

March 1980 to May 1981 Dept of Electronics, Govt. of India, JSO

KEY RESPONSIBILITY HANDLED DURING VARIOUS ASSIGNMENTS

PROJECT MANAGEMENT
- End to end execution of the project dealing designing, engineering, installation and commissioning of DCS and PLC based controls and instruments.
- Effective planning & scheduling to ensure execution of projects within time & budgetary parameters.
- Implementing Total Productivity Maintenance Tools and ISO 9002, QS 9000 quality standards.

MAINTENANCE
- Responsible for effective maintenance of electrical systems to ensure smooth operations.
- Planning & effecting preventive & corrective maintenance schedule for enhancing system reliability and minimising the system/ equipment down time.

PROCUREMENT/ VENDOR DEVELOPMENT
- Designing, implementing and monitoring effective procurement schedules along with finalising the technical specifications of the materials/equipment/machinery.
- Identifying and developing quality vendor sources for achieving cost effective purchases and reduction in delivery time.

QUALITY ASSURANCE
- Adapting and implementing measures for maintaining and meeting the quality standards and specifications.
- Ensuring adherence to quality standards for all the incoming equipment/ system.
- Review the operational practices, identify the areas of obstruction/ quality failures and advise on system and process changes for qualitative improvement.

Major Projects Handled
AGT PIPELINE PROJECT-PUMPING STATION
1. Construction and Commissioning of ICSS SYSTEM(ABB),MOL Pumps.
2.. Construction and Commissioning of C.TU. PLANT

At Port Harcourt, Nigeria
* Successfully executed the following DCS & PLC based instrumentation projects viz.,
- I.Q.Actuators
- Enraf Level Transmitters
- Deltav DCS
- Paging System
- Field Instruments-Smart Transmitters

At Hyundai Con. & Engg. Co. Ltd. Dubai
- Refurbishment design, engineering, installation and commissioning of DCS system for replacement of existing Siemens Control System of system turbine and boiler.
- Design, engineering, installation and commissioning of DCS system for 3 gas turbine (total-400mw capacity) and 3 WHRB (waste heat recovery boiler)
- Harmony-Harmony Control Units, Harmony Rack Controllers, Harmony Rack I/O.
- Human System Interfaces-Conductor Nt, Operation Net, Ethernet Switches, Network Interface Cards.
- System Engineering Tools-Composer.

At Alexandria Carbon Black Alexandria, Egypt
* Design, engineering, installation and commissioning of TDC-3000 Honeywell DCS System
* Installation and commissioning of process instrumentation i.e. Mass Flow Meter-Micromotion, Smart Transmitters-Fisher Rosemount, Smart Positioner-Fisher Posemount.
- Handled effective maintenance of
- DCS-Deltav (Fisher-Rosemount), Foundation Fieldbus and Advanced Process Control Loops.
- Control System of Boilers and Steam Turbine (Boiler-American Shack, Turbine-Siemens)

At Offshore Platform, Bombay (ONGC)
* Successfully handled commissioning & maintenance of
- Central Control Panel and associated process instrumentation used for oil & gas processing. (Controllers, Transmitters, Control Valves, Turbine Meters).
- En-Tronic Control of Process Gas Compressor (Gas Generator-Rolls Royce, Power Turbine-Cooper Bessmer, Compressor-Kawasaki)
- Instrumentation System of Centrifugal Pumps Driven by Gas Turbine. (Vibration System and Temperature System Monitoring)
- Control and Instruments of Gas Turbines used for electric power generation.
- Fire and gas Detection System using PLC (Series 3 General Electric)
- Ensured effective preventive & corrective maintenance of Pneumatic Control Panel, Hydraulic System, Electronic Controller, Vibration & Temperature Monitoring Systems, Pdp-11/34 Computer, Rosemont Transmitters, Control Valves, Daniel Turbine Meter, Rosemount Transmitters, Control Valves, Turbine Meters Electronic Exchange and Telemetry System.

At Hazira Gas Processing Complex, (ONGC)
* Commissioning and maintenance of
- GSU, CFY, DPD, SRU plants and its associated field instruments.
- Yokogawa Distributed Digital Control System (DCS), Centum and PLC.
- Distributed Digital Control (DCS), Bailey Network 90.
- PCU, OIU, Modification Configuration, Graphics and Plant Communication Loop.
- Successfully maintained Gas Sweetening Phase I & II instruments viz., Gas Detector-Rexnord, Pressure Swich-Cella, Control Valves-Valtak, Tuflin, Yarway Solenoid Valves-Versa, Annubar-Desterich, Butterfly Control Valves-Fisher Level Gauge-Klinger, Shutdown Valves-Mapegaz, Transmitter-Rosemount. Rotark Actuator-Etex, Control V/V Kent Process, Pneu Op. V/V-Walton Weir Pacific, Regulator-Fisher/CCI-Control, Electronic Transmitter-Bailey Control, Pressure Switch-Sor, Pressure Gauge-Dressure Industries, Diff. Pressure Gauge-Vossler Co., Thermocouple-AWC, Temp. Switch-Sor Flow Element-Superior, Annubar-Dieterich Standard, Tank Level Gauge Varec, Level TX-Fisher/CSI-Control, Level Sw-Magnetic Sensing Waves and H2S Analyser-Measurementation.

At Nazira (Assam) (ONGC)
* Commissioning and maintenance of the following Instrumentation Projects
- Distributed Digital Control Systems - DCS LAKWA IX and DCS DML-I
- Inst. System WIP-III & WIP-IV
- Inst. System Gas Grid Compressors-Project RDS
- Inst. System Gas Lift Compressors-Project-RDS
- Inst. System Gas Lift Compressor Project-GLK
- SCADA System
- PLC System
- TDMA System Communication Concentrator Model
- Microvax 3-400 System S3 Texas Inst. Software Systems.
- Tank Level Transmitters-Metritape/Enraf inall. GGS at ONGC ASAM.
- Instruments of new GGS: P.G-H Guru, Transmitter-Rosemount, Level TX-V AUTOMAT, Control Valve-Masoneilan, Safety Valve-Audco, and Level SW-V Automat. Pressure SW-Switzer, DCS-Yokogawa and PLC-Allen Bradely.

At Baroda (ONGC)
* Successfully completed Instrument & Scada Systems

TRAINING
* Have attended the following training programs -
- One month in Houston (U.S.A.) for control & instrumentation of Turbo Generator System.
- One month in Yokigawa, DCS System.
- 14 days in Ohio U.S.A. on Bailey Control Network – 90 (DCS)
- One week in Egypt Honeywell DCS TDC-3000 system.

EDUCATIONAL QUALIFICATIONS
* M.E. (Elx.& C) from University of Rourkee in 1981.
* B.E. (Electronics ) from M.M.M. Engineering. College, Gorakhpur in 1978. (84.3%, II nd Rank.)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3751 to 3800 of 9785)

Go to Search Parameters...

Brief Description

I have passed bachelor"s degree& have 11 years working experience of utilities operation in oil and gas refinery ,petrochemical and polyester plants.

I posses more than 10 years of experience in Projects Planning, Scheduling, Monitoring and Control in India and abroad on assignments in USA.

Drilling supervision and engineering, well control instructor, rig commessioning

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

An experienced and highly skilled Project Manager with over 10 years of practical experience working in the Project Management field for organizations in the government and the private sectors.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

Geophysicist/Geologist/Seismologist/Volcanologist

A B.E. Chemical Engineer with broad ranging experience in Health, Safety & Environment (HSE) in oil and gas sector. proven results to minimize the risk and injury to personnel, protect company’s assets as reasonably and as practically possible.

•A professional with excellent communication, organizational, and administrative skills. •A team player capable of motivating others offering more than 10 years of progressive experience.

Environmental or HSE Manager with 13 years industry experience, the past 7 of which have been focused on EMS and HSE-MS for the upstream oil & gas industry. Worked in Australia, Middle East, Sth Europe, West Africa & Russia.

M. Sc. Geophysicist/Geologist

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.

OBJECTIVE To obtain a management position at an industry-leading company

•10 Years of Experience as Maintenance and Reliability Engineer •Certified Reliability Engineer by ASQ •Certified in NDT by the ASTM •Taught more than 20 courses associated to maintenance and reliability methodologies, training over 300 professionals. •ASQ Member •ASME Member

I HV WORKED AT LPG. SRU. TANK FORM . AMIN UNIT .

Working in Oil industries since 8 years i have worked to many multi national oil companies etc BP, OMV, OPI, Total, OXY, Nexen and Power Plants as HSE Representative.

I have a diploma in computer application and good knowledge in Document controlling with more than 45WPM typing speed, good command and MS-Office, ability to draft letters, memo independently

Have a working experience of 15 years in the Financial Sector and worked in good financial institutions such as Citibank, Credit Agricole, Bear Stearns and MashreqBank. I am a Certified Internal Auditor and a Certified Fraud Examiner.

Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.

Operaton experience in combined cycle power plant (GE 6 FA, 9FA, siemens V94.2 turbnes)

Industrial, commercial electrician. Licensed Master Electrician - Colorado Licensed Journeyman Electrician - Alaska

TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET

Welding Inspector

:Onshore as Asst. Production Operator for Occidental Of Oman through The Oman Construction Company (TOCO)

Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.

Certificate in Petronas Apprenticeship Scheme

I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.

Master in Industrial Engineering (With 3.86/4 CGPAand BE in Mechanical engineering(With Honours) with adequate knowledge of computer including (MS Ooffice, autocad 200) and good communication skills.

process operator/control room operator

Division Director / Business Development / Oil & Gas Industry

Project Management

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba

Licensed Journeyman welder, Interprovincial Red Seal attained. Alberta B Pressure WCB registered F3/F4 qualified, 4-position flux core (Flat, vertical, horizontal, ovehead), CSTS

SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.

6 years experience to work with large data base, to consolidate the information in useful reports necessary to Group Procurement for the activities of scheduling; management of suppliers and their performances, strategic sources

Senior Piping Designer PDS

Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.

Internationally experienced purchasing manager with experience managing an office that supports multiple sites. Experience with exporting goods to most countries in South America. Excellent people skills.

Rig mechanic, mechanic supervisor, motorman, diesel mechanic

Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer

Mechanical Maintenance Engineer/contract and Procurement Engineer

Professional Project Manager, PMP certification, More than 15 years of domestic and international oil & gas industry experience

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

Registered Mechanical Engineer Cert. No.61058,CSWIP 3.1 Cert. No.35530

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 [ 76 ] 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out