Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #11215 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation of the following units: Oil and gas separation and reinjection, waste water treatment and injection, Crude Distillation, Vacuum, Depropanizer / Debutanizer, Naphtha HDS, Naphtha Catalytic Reformer, Diesel HDS, Oil / Gas Separator, Sour Water Recovery, Sour Gas Recovery, UOP Merox Treaters, Product Movement and Storage, Rail Car and Truck Loading Racks. Developed many Training Plans, EOP's and SOP's for various refinery units. Acquired excellent skills on DCS and computer system operations after receiving intensive classroom and simulator training. Experienced in classroom and OJT (hands-on) Trainer for refinery process, DCS, and Computer operations.

------------

OBJECTIVE:
------------
To work for a very professional company,with people who are team players and who want to be the best at whatever they are doing.
------------

WORK EXPERIENCE:
------------
2001-present
Anadarko Petroleum Co.
17,000 Northchase Dr.
Houston, Tex. 77060

CCR Consultant For Commissioning and start up of six 75,000 b/d Crude/Gas Separation Units, three Glycol Dehydration Units and associated offsite equipment. 500,000 b/d Produce Water and treated water injection units. Two 300,000 B/D product pipelines. Located in Hassi Berkine Algeria and Ourhoud Algeria. Reviewed and corrected Standard Operating Procedures (SOP). Set-up and standardized Isolation and blind register.

1998 - 2001 Kirkland Commissioning Services/ Hassi Berkine Algeria
611 Williams St. Waxahachie, Tex. 75165
972-938-8644

Bailey DCS / August Safety Systems
Bailey DCS Operator, Trainer, Commissioning Specialist
60,000 BD Crude/Separation Unit
Wrote Start-Up and Shut Down Procedures

1998-1998 Williams Learning Network /Transamerica Ref.
Norco, La.
504-764-2610
Honeywell TDC-4000 Operator/Trainer
Technical Writer, Contract Operator, Commissioning Specialist,
DCS, Control Room Trainer (Crude Unit, Vacuum Unit, Naphtha Stabilizer)

Pride Refining Inc.
Abilene, Tex.
915-674-8000
Unit Operator /Control room operator
Operating 34,500 BD Single Tower Crude Unit
12,500 BD Multi Tower Crude Unit
12,500 BD Diesel Hydrodesulfurazation Unit
50 GPM Sour Water Stripper Unit
NAHS Unit
7000 BD HDS/Catalytic Reformer Unit
Two 25,000 PPH/150 PSI gas fired boilers
Chemical Control for two Cooling Towers
Three product pipeline system, pumping JP-8, Gasoline, Diesel, and LPG
The HDS/REF, Diesel/HDS, NAHS, and SWS were controlled by Honeywell TDC -3000. The Crude Units were controlled by a Foxboro Board and Electronic Controller system

Senior Field Operator
Operated 12,000 BD Vacuum Unit
6500 BD Depropanizer/Debutanizer Unit
Two 25,000 PPH/150 PSI gas fired boilers
Cooling Towers, which included all water and chemical controls

Field Operator
Operated 3500 BD, 7500 BD, and 10,000 BD Merox Treaters. Treating Kerosene, Debutanized Bottoms, and Heavy Naphtha, for use in JP-4 Jet Fuel blending. Blending 50 Be' caustic down to different strengths for process operations. Injecting chemicals for Gasoline and Jet Fuel Blending.

Tank Farm Operator
Transfer of products to storage, Pipelines, and any other destinations. Assisted
Field Operator when needed.

Loader
Loading of Government Jet Fuels and any other products produced by the
Refinery. Loaded Railcars for destinations across the Country.

1979-1985 Dresser-Atlas Wireline Services/ Dresser-Atlas International
Abilene, Tex./ United Arab Emirates
Wireline Operator, Trainer, while on International assignment

------------

EDUCATION & CERTIFICATION:
------------
1972- 1974 Lower Richland High School Hopkins, S.C.
CPR (1/17/97)
FIRST-AID (4/26/96)
HAZARDOUS COMMUNICATION (1/22/96)
HAZARDOUS MATERIAL TRAINING (4/11/97)
BASIC FIRE TRAINING (8/29/91)
RESPIRATOR, SCBA (5/12/96)
H2S TRAINING (3/09/95)
HM 126F (4/26/96)
LOCKOUT-TAGOUT (12/14/94)
PPE (5/12/95)

------------

ADDITIONAL INFORMATION:
------------
Honeywell TDC-3000/4000 DCS
ABB August/Bailey DCS
Yokogawa 3000 DCS
Axsia Serck Baker Produced and Wastewater treatment systems
ABB August Safety Systems
Product Testing and sampling
Hazardous Material Technician
Hazardous Operations Team Member
PC experience (WP, MS OFFICE, EXCEL, WORDPRO 97, MS WORD)
Chemical Control and testing

------------

View contact information...
«« previous resume next resume »»
Search Results (Resumes 5451 to 5500 of 10816)Go to Search Parameters...
Brief Description
I have extensively worked with world renowned engineering firm
Effective comminication, Overall understanding of Technicalities pertaining to my day-to-day activities. Reporting to the Project Manager of SNGP (Saih Nihayda Gas Plant) and Associated Facilities. US$ 150 Million Project, for Petroleum Development Oman, being executed as a Joint Venture Project wit
I am presently working as Advanced Process Control Engineer in one of the leading APC company I am having hands on experience of DMC+,AspenIQ,InfoPlus21, Spyro,Aspen Blend and having a fair exposure of HYSYS simulation software. I am a chemical Engineer from India and worked in Oil refinery.
Good relationship with the work friends, easiness of creating friendships, taste of reading, to fish and to do pictures for besides practicing soccer.
I have worked as a Driller and Tour push for the last 27 years.
Coded pipe & pressure vessel welder with valid certification
Construction superintendent/construction manager
Automation, control engineering in industrial plants
Area Maintenance Static Supervisor
SCM Logistics and Materials Managment
Marine Electrical with electronics & Automation Exp. (off - shore, Oil Rig, FPSO, Drill Ship, OSV) 21 years exp.
Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation
Journeyman Pipefitter, Journeyman Gasfitter (Class GB-00018470), Journeyman Plumber - Red Seal (IP #M-16-00616) Since starting my apprenticeship in 1988, I have gained experience in many aspects of the mechanical trade, such as construction, shut-downs, and maintenance...
Am a fresh directional driller with background in well planning and borehole survey, i have ten years experience in various drilling position.
Automation engineering experience in oil and gas sector. Programming experience Hardware and software knowledge
Chemical Engineer with 11 years Experience in Process Engineering, Production in chemical industry
Job Objective To pursue a career with a major international industry. The position should offer career opportunities, expansion of knowledge and an immediate challenge
My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.
Engineering, cadd designer, autocad, microstation
Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.
13 years Completion/Workover experience. Completion, sand control, fracturing, matrix acidizing design. Extensive project management experience including three assignments in operator's offices. Operations and engineering management experience.
Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipment by the use of SKF Microlog 60 with SKF Prism4 1.35 & SKF Machine Analyst 2.2 vibration analysis and data management software. Familiarity with the data base creation, modification and report preparation using SKF MA
i m the student of BS GEOLOGY 7TH semester nd looking for job.
More than 8 years HSE experience.
1yr Apprenticeship in BHEL,Trichy
A focused team oriented Petroleum Technologist who brings with a varied work experience in production line and Electrical and Electronics troubleshooting able to work in ambiguous and demanding situations with positive results.
marine engineering steam ship,maintenance fitter,malaysia maritime academy
Good communication skills; Microsoft and Programming skills; B.Eng in Mechanical Engineering.
Electrical and electronics engineering
Working knowledge of PLC's
A Safety Professional with a enthusiastic approach to Safety & Environmental issues, excellent communication skills, able to plan & prioritise busy management schedules while ensuring high visibility and involvement
I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.
I am a B.Tech. (Applied Petroleum Engineering) from University of Petroleum and Energy Studies, Dehradun (India). Though I am not experienced but i have certain skills like I work well as part of a team andI find it easy to get on with people.
Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I
Proven record of growth and success building businesses from start-up to profitable operations in highly competitive environments. Very skilled at identifying market opportunities and creating strategies to effectively exploit them. Proven success record setting strategic direction, executing to pl
Free! HSE Manager - Value Assurance Manager - Asset Integrity Manager
POSITIVE ATTITUDED, HARD WORKING
I have a post graduate degree in Petroleum and Gas Engineering; while preparing my thesis based on secondary oil recovery (Niger Delta),I work in collaboration with SPDC Nigeria. They provided me with data.I have skills also in drilling Engineering in areas of casing design and mud Engineering.
Electrical Engineer with experience in Engineering,Procurement and Construction
Experience in Mound storage pressure vessel construction, fabrication. ERP software application experience, Project execution, commissioning and operations.
I have a TWIC and Safety card, currently looking for offshore and overseas posistions.
To obtain a full time career that will enable me to utilize my skills and abilities. To also have the opportunity and availability for advancement with the company.
I am process engineer for vertical batch annealing line have 7 years experience, Training Courses(communication skills - business writing - problem solving and decision making - fundamentals and statistics analysis)
I’m currently on an M.Sc progamme in Petroleum Engineering at Heriot-Watt University, Dubai campus, I hold a B.Sc. Degree in Geology from the University of Legon, Ghana.
Indonesian Citizen healthy, 32 year’s of age, Certified Welding Specialist for last of ten (10) years, GTAW-SMAW: SS, CS, Duplex SS.
Qualified electrician - Electrical Technician - Diploma - Busy with btech degree
Mechanical engineer and a well engineer
Offshore Drilling Materials and Logistics Supervisor. with experience of 4 + years.... looking for better opertunity
In oilpatch for 7 years
10 years drilling experience
First   Prev   101   102   103   104   105   106   107   108   109   [ 110 ]   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com