Resume - Piping stress analysis usisng CAESAR-II, support engineering, pipe thickness cal...

Misco Jobs

Resume #11265

CONTACT INFORMATION:
View contact information...

POST APPLIED FOR Piping Stress Engineer

EDUCATIONAL QUALIFICATIONS First Class B.E.(Mechanical) from JADAVPUR UNIVERSITY, Calcutta,
India in the year 1994.
Certificate course in Piping Engineering from I I T, Bombay in 1997.

EMPLOYMENT DETAILS
YEARS OF EXPERIENCE Ten (10) years
PRESENT SALARY Rs 37,500/- per month
EXPECTED SALARY Negotiable

PRESENT EMPLOYER
TRIUNE PROJECTS PVT. LTD., New Delhi, India (A reputed Design & Engineering company in Oil & Gas sector with ISO 9001 certification)
Joined TRIUNE PROJECTS Pvt. Ltd. on August 2002. Presently working as
Dy. Manager- Piping

PREVIOUS EMPLOYER
MECON LIMITED, India (A Govt. of India Enterprises) A leading Design & Engg. company with ISO 9001 certification
Worked in MECON Ltd. from March, 1995 to August 2002.

SPECIAL SKILLS
Computer Proficiency Proficient in CAESAR-II, PIPENET, AutoCAD and MS Office packages
Knowledge of Codes / Standards Have in depth knowledge of ANSI / ASME B31.1, B31.3, UKOOA/ BS 7159, API RP14E, OISD Norms and relevant ASTM & IS codes.

PROFESSIONAL EXPERIENCE
Have hands on experience in engineering of various industrial piping system based on international standards and conversant with PDS / PDMS environment. Major achievements/ expertise are as follows:
Stress analysis in CAESAR-II software for static and dynamic load cases ( viz. Static, Wind, Modal, Safety relief, Slug flow and Seismic Analysis)
Developing piping layout drawing comprises of Air fin cooler, Reactor, Heater, Column (Stripper), Waste Heat Recovery Boiler, Pumping Station, Compressor station, Turbo-blower, Tanks, etc.
Engineering of pipe support including spring hangers.
Piping load calculation for civil / structural design.
Pipe sizing and thickness calculation.
Hydraulic balancing/pressure drop calculation of piping network using PIPENET software package.

Outlines of the major projects handled are furnished below:

Alstom Power
(Off-site Facilities of 3X360 MW Steam Power Plant Saudi Electicity Corporation Saudi Arabia)
Developing piping layout for HFO & Crude Oil storage Tank firm (500mX500m) consists of four nos. tanks of dia.86m
Developing piping layout for HFO/CO pumping station(90mX30m) comprises of two nos. tank to tank transfer pumps and nine nos. fuel oil forwarding pumps to boilers.
Detailed engineering of piping on sleeper / rack including expansion loop sizing.
Identification of stress critical lines and forming packages for stress analysis and Stress analysis of relevant systems & Pipe support engineering.

Hydrogen Generation Unit( 140,000 Tpa), Panipat Refinery, Indian Oil Corp., India
(Worked as Lead Engineer-Stress)
Identification of stress critical lines and forming packages for stress analysis
Calculation of load data for pipe racks, Air fin coolers, Technological structures, etc
Detailed engineering of piperacks.
Flange leakage calculation
Engineering of pipe support including spring hangers.
Detailed engineering of flare network (Size 54¡¨NB, 48¡¨NB and below, Temp. max. 320deg.C with temp. gradient)
Detailed engineering of Steam pipes ( Size 24¡¨NB & below, Temp. max. 490deg.C, pressure 6000 kPa)
Detailed engineering of various process piping system (Reactor piping, Air fin cooler piping, Heater piping, Process pump & boiler feed water piping, Centrifugal & reciprocating compressor piping, PSA Off gas piping, etc).

Off-Shore Shg Platform, Ongc Ltd., Bombay High, Mumbai, India.
Stress Analysis of Glass reinforced epoxy (GRE) pipes using CAESAR-II ( approved by M/s AMERON (PTE) LTD., Singapore)
Engineering of pipe supports.

Launching Pad For Polar Sattelite Launch Vehicle,
Indian Space Research Organisation, Sriharikota, India

Compressed air distribution piping network
Process water and LP fire water piping
High pressure fire fighting water network
Detailed engineering of Pumping station and compressed air station.
Stress analysis of HP fire water network considering rocket launching time jet load.
Hydraulic balancing of fire water network using PIPENET software.

Coke Oven Battery & By-Product Plant, Konark Metcoke Ltd., Duburi, Orissa, India
Design of inter-plant and in-shop piping drawing for utility steam(7bar), Compressed air and cooling water pipes.
Design and engineering of Compressed air station, Cooling water and Fire water pump house.
Stress analysis of utility steam network.

350cu.m Blast Furnace,
Kudremukh Iron & Steel Company, Mangalore, India
Engineering of Turbo-blower piping and ducting.
Stress analysis of hot air (167deg.C) duct.
Blast furnace cooling water piping
Compressed air and process steam piping

1MTPY Copper Smelter With 35mw Captive Power Plant Birla Copper Limited,
Bharuch, Gujarat, India
Preparation of technical specification, bid evaluation & recommendation for order placement for the following packages:
- 2.2.5MW DG Station
- 2x650Nm3/min Turbo-blower station
- Waste heat recovery boiler for smelter furnace.
Design and engineering of Pressure Reducing Station for reducing HP steam (60bar sat.) from Waste heat recovery boiler and from turbine extraction to MP & LP steam as required by various processes
Process steam piping running on interplant piperacks to various units in the plant.
Boiler feed water and main steam(60bar sat.) piping for two nos. Waste Heat Boilers (21tph & 18 tph)
Flexibility analysis of the above pipes.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5851 to 5900 of 10917)

Go to Search Parameters...

Brief Description

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

Having 15 years of experience in oil and gas construction and maintenance feild, with Diploma in Industrial safety, Environmental management

Power Plant Operator Gas Turbine Steam Turbine Supervior Operations GE HRSG

Education: Bachelor Degree in Economics

Piping stress analysis usisng CAESAR-II, support engineering, pipe thickness calculation, pressure balance in PIPENET software, etc

Analytical Thinking , Technically Sound, Good Negotiator, Innovative

10 years of experience as chemist with exposure to most modern methods of analysis

chemist, corrosion eng, oil and gas fields

To obtain a Technician, Operator, or Specialist Position.

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

Design/Detail engineering, inspection , erection & commissioning of Oil & Gas Plant,Agro-Chemical industry, Refinery, Pharmaceutical industry involving PLC & DCS system, fire alarm system, access control system, CCTV system ,Public address system, local control panel & field instruments like pH met

6+ years of experience in Reservoir Engineering and Oil Industry.

Experienced Civil / Structural Engineer

Responsible for on and offshore site planing for well testing operations job logistics and personnel movements. Working in a wide range of environments and positions around the world. Responsible for the safety of the crew, the accurate reporting of operations and morning reports, preparing the corr

Over 20 years experience

Wireline Operator/Supervisor

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

25+ years experience

20+ years oilfield experience, excellent work ethic - personal skills - time management, own truck with commercial insurance and plates, current tickets

Inspection Coordinator / Welding Inspector

Technical skilled person for supervising piping /construction projects

A state Engineer in refining

30 years experience in the pipeline field, which includes- bidding jobs, safety procedures, quality control, facility installation, environmental knowledge, welding procedures, know procedures for filling out ground disturbance, hot and cold safe work agreements and confined space entries

I am a mig welder that is a harder worker that is willing t o learned new skills to become a better overall welder.

I have a degree in bachalor of engineering, in mechanical engineering discipline. i will be able to perform effectively if i am being taken

NDT Level II - UT / RT / MPT & LPT - Sr. NDT Tech.

Experienced Opito Level 3 offshore rigger with additional safety and working at height training.

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

PDS Modelling, Microstation & ACAD 3d Modelling

Bachelor’s degree in Mechanical Engineering passed from N.E.D. University of Engineering and Technology Karachi in the year 1998

5 yrs extensive training and experience in PDS-EERaceway and Microstation, 8 yrs in Autocad

With 5 yrs experience, Chevron Indonesia, as a Petroleum/Reservoir Engineer. Activities include EOR optimization, reserves estimation, depletion plan, project management, reservoir surveillance, workovers, drilling programs, and artificial lift optimization.

M.S in petroleum geology and petroleum engineering. years working experience in reservoir characterization, formatioin evaluation in industry. knowledge in reservoir simulation, prduction and drilling engineering.

Power Station Chemist in the Philippines with experience in power plant desalination and ultrapure water treatment, corrosion issues, water/steam purity control, fuel gas and oil chemistry and engineering projects related to power plant chemistry.

engineer with excellent telecommunication knowledge

I have been involved in Health, Safety and Environment in excess of 25 years and I am an experienced and qualified Health and Safety Professional in a Construction, Oil /Gas, Drilling Off-shore and On, Aviation and Petrochemical environment. This has enabled me to undertake the following:

Chemical Engineer

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

Aircraft maintenance engineer with turbine experience. AC/DC, hydraulics, pneumatics troubleshooting and maintenance. Vibration diagnostics and diagnostic software.

Characterization of locations for production studies. Static models Generation. Seismic interpreter. Professional development toward the coordination of technical teams. Flexible to work under different technological platforms and interpretation (Geology, Geophysics and Petrophysics)

pipe fitter,6G certified gtaw& smaw welder ,field experience, saudi arabia Aramco project, Malaysia liquified natural gas under hyundai constraction, kellogs proponent , petron bataan refinery Philippines

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

LekCV

Diploma in mechanical engg.

Engineering Graduate with extensive offshore drilling experience and strong IT skills

Canadian Wellsite supervisor and Production Foreman w/ extensive International experience, Supervising workovers & completions. Provided practical operation solutions to facilities in Russia, Kazahkstan, Kyrgystan, India and Canada.

significant experience as Production operator in Oil & Gas Production and Processing industries around FOUR years experience.  Reviews unit operation data(shift supervisor /engineer log ,etc)and analyses this data to determine potential problems and ensure that unit operatio

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 [ 118 ] 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out