Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #1127 next resume »»
CONTACT INFORMATION:
View contact information...

Current Salary             :    Rs. 7500/- per month

Salary Expected            :    As per your terms and conditions

Status Single / Married        :    Single

Height / Health     :    172cms, 60Kg / Sound physique Normal

City / Town of Residence    :    Tuticorin / Tamil Nadu, India.

Location             :    Tamil Nadu

Country                :    India

Notice period from present employer :    Not Applicable

Family Status Married / Dependent    :    Single


Education Qualification / Special Skills / Experience

Education    Subject     Duration

B.Sc., Degree    Chemistry (76%)    1992-95

SUPERVISOR / MANAGEMENT : Southern petrochemical Industries
Corporation Limited.

YEARS OF EXPERIENCE     :    Six Years.

SUPERVISOR / MANAGEMENT :    Southern Petrochemical Industries Corporation Limited.


AS CHEMIST,
RESPONSIBILITIES

1.Collecting the samples from the plant.
2.Doing the analysis.
3.Reporting the values to the plant.
4.maintaining work sheet.
5.recording the values in the computer.

ABOUT THE QCL
    Our Laboratory is equipped with most sophisticated / automated instruments.
Ammonia Plant Analyses
    Section wise analyses are given below.
HYDROFINING SECTION

    The sulfur removal is based on IIP-IFP process. The petroleum products such as Naphtha, Fuel oil, LPG etc. are analysed as per the prescribed standard methods based on Institute of Petroleum (IP), UK and American Society for testing and Materials (ASTM), USA.
S.No    Sample    Analysed for
1    Naphtha     Density, Reid vapour pressure, calorific value, C/H ratio, Residue on Evaporation (ROE), Distillation range, Olefins, Aromatics, Total sulfur, Mercaptan, Sulfur, Cl-, Lead and Vanadium.
2    Desulfurised Naphtha    Traces of sulfur-qualitatively by Doctors Test and Quantitatively by Raney-Nickel method in PPM level.
3    Decoking Gas     CO2, O2 & H2S
4    Instrument Air    Dew Point
5    Purge Gas     H2, O2 & H2S
4    Process Condensate     pH, NH3, SiO2, Iron & K2O
5    Boiler feed water     Dissolved Oxygen
6    Flue gas     CO2, O2, SO2 & SO3

ACID GAS (CO2) REMOVAL
    CO2 removal is a dual absorption-dual regeneration Process using Giammarco-Vetrocoke solution. It is an amine based (Diethanolamine, DEA acid gas removal system.
S.No    Sample    Analysed for
1    G-V Solution     K2CO3, KHCO3, FC, V5+, V4+, DEA, Glycine, T.Fe, Cl-, Foaming height and collapsing time.
2    CO2 Gas     Purity and inerts
3    Ammonia     Purity, Oil, Moisture
4    Ammonia tankers     Inerts
5    Shutdown purge gas     CO2, CO, H2, O2
6    Methanator Exit gas     CO, CO2, (Using GC with FID & H2, or by Ba(OH)2 Solution.



SPECIAL ANALYSES
S.No    Sample    Analysed for
1    Fuel Oil / LSHS     Flash point, Fire point, Ash, Viscosity, Moisture, sediments, sulfur, acidity, V, Na, Ni, Pour point.
2    Lube oil     Density, viscosity, moisture, acidity, sediments, flash point, pour point.
3    Transformer oil    Viscosity, moisture, acidity, flash point, fire point, density, sediments.
4    LPG    Weathering test, H2S, mercaptans moisture, composition, specific gravity and vapour pressure.

WATER AND EFFLUENT ANALYSES
S.No    Sample    Analysed for
1    Raw water     pH, turbidity, TDS/Conductivity, Alkanity, Hardness, Silica, SO42-, Cl-, free residual chlorine, T.Fe.
2    Polished water & demineralised water     pH, turbidity, Conductivity, silica, Na, K, Al, Ca & Cu
3    Cooling water     pH, turbidity, hardness, alkanity, silica, AN, FRC, orthophosphate, polyphosphate, biocides, sisperz polymer & T.Fe.
4    Blow down condensate     pH, SO32-, PO43-, and silica
5.    Effluent Water     pH, AN, As, UN, Total phosphate, fluorine, TDS, COD, BOD.
6    Ambient air     Oxides of sulfur, NH3, H2S, SPM, Nitrogen oxides and fluorine.






INSTRUMENTS HANDLED
Instruments     Make     Used for
Gas chromatographs     Shimadzu ChemitoFisher     Gas analyses
Atomic absorption spectrophotometer.    Varian     Element analyses like Ca, Mg, Fe, Al, Zn, Ni, Ba, Mn, As, Mo & etc., using flame.
AAS (Graphite tube atomizer)    Varian     Element analyses in ppb level
Flame photometer     Systronics     Sodium & potassium
Colorimeters     ERBA, Spectronic 20,21    All colorimetric analyses
pH meters     Systronics     Water samples
Conductivity meter     Elico     Water samples
Nephelo-turbidity meter    Systronics     Water samples
Visco meter     Brook field     Oils
Balances     Mettler     Weighing
Memo titrators (Auto tritrators)    Mettler DL25, DL40 & DL 67    Auto titrations
Karl fisher titrator     ---------    Moisture in oil
Auto analyzer     Technician     Ammonia, phosphorus
Pensky-Martens flash point apparatus     ----------    Fuel oil and Lube Oil
UV-VIS double beam spectrophotometer     SHIMADZU    To measure optical densities
Spectrophotometer     Systronics     To measure optical densities

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6201 to 6250 of 9785)Go to Search Parameters...
Brief Description
Use of application packages &soft wares such as MS Word, Excel,AutoCAD(2000-2007) for generations in 2D, 3D & Isometric,PDMS. I-Sketch,M.T.O generation (Alias),Acrobat Adobe Reader.Familiar with PIPEDATA PRO EVOLUTION), International Piping sotwares(ASME, ANSI, API etc)all Windows Operating Systems
Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries
EXPERIENCED PIPING ENGINEER WITH PDS ADVANCED EXPERTISE / TECHNICAL DATA SPECIALIST
Engineer /PGDBM 17 Years Experience in SCADA, PLC, Automation in INDIA, France, Gulf, Middle East
I am a graduate Mechanical Engineer having16 years Design experience with oil refineries and reputed Engineering consultancies. I am well experienced in all piping design activities including stress analysis.
Experienced hydrogeologist and groundwater modeler with PHD from USA and work experience in USA, Europe, and the Middle East
Precommissioning, commissioning, operation process engineer
I have exposure of Process engineering,Project & commissioning .Also exposure of Operations, manufactring of Chemical, Fine Chemicals, Agrochemicals plant.
Quality assurance engineer
Driller Five years, Derrickman Two years, Motorman Three years, Now nurse ICU, able to use micromiter and read blueprints hard worker and easy to work with travel anywhere
4 Years Oil Field Experience; Bachelor of Mechanical Engineering Degree
I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.
Project Management and Drafting Skills PFDs, P & IDs, General Arrangements,Isometric Drawings
10 years experience of geotechnical investigation and environmental remediation
Controls & Instrumentation Engineer/Sr. technician with experience in GE gas turbine controls - (MK II, MK IV, MK V & MK VI), boiler & steam turbine control and protection, DCS, PLCs and instrumentation. I have a total of 15 years experience in the field of controls & instrumentation.
Mechanical Design CATIA v4 v5
I am a graduate Mechanical Engineer, experienced in Power and Oil & Gas sector in Operation, Maintenance and Design side.
I am a Petroleum Engineer from Indonesia, currently working for Vico Indonesia in Jakarta.
I am presently placed as the administrator under the US Patent attorney, I have the experience as secretary cum HR assistant in the private limited company, In view of upgrading my career, I am looking for the suitable positions in abroad, due to my financial requirements.
Project Administration, Accounts Payable with SAP Experience
At Present, I am working, as Manager "Flawless start up Initiative" For M/s DODSAL & Co L.L.C. Dodsal is leading single source provider of complete EPC services to Oil and Gas Industries.
A career in Oil & Gas Industry as Quantity Surveyor
Lease acquisition, title research (surface and mineral), curative, imaging, runsheets and final title
Immediately Available: Experienced Landman with a Passion for Detail and Research!
25 plus years of heavy trucking and construction experience.compotent with hand,pneumatic tools, cutting torches, welding in flat position ,current ga. cdl with tank end. hard worker, healthy.
Planner, scheduler, Teamwork, time manangement, lead, excellent communnication
I am working in a oil field company in abudhabi as a store keeper since 1999. I am seeking a suitable vacancy for my experiance.
Working as Maintenance Planner in AbuDhabi National Oil Company - TAKREER on Contrct hire. well versed in MAXIMOi, Primavera & MS Project- Planning System.
An accomplished Logistics specialist with extensive experience of fast moving Supply -Chain operations worldwide.
• Over 5 years of proven experience in installation, maintenance, reparations, projects and operations in petrochemical/refining industry • Identify, investigate, correct and document potential operation, maintenance and safety problems
Pursue a challenging career as an Industrial / Quality / Mechanical engineer in a reputable organization. I consider myself a good team player and result-oriented who likes to face challenges. MS Industrial Engg. with major in Quality Engg. B.E in Mechanical Engineering
I am available for immediate employment as an Assistant Driller or at a position below this.
Sr. Petrophysicist / Geologist, 13 year international experience.
I am young graduate engineer ready to work at any place in the world and with great interpersonal skill with the team
LPG,NAPHTHA,FUEL OIL, AMMONIA STORAGE TERMINAL AND UNLOADING FROM SHIP IN CALTEX-SPIC LIMITED,INDIA- LPG,AMMONIA STORAGE TERMINAL. UNLOADING FROM THE VESSEL USING RMCA UNLOADING ARM.
Worked as an Auto Cad Draftsman & Secretary In Saudi Arabia 5 Years and still continuing.
As an engineer, my unique wish is to work within a highly institutionalized firm so as to improve my abilities and prove the educational background I have. Off these purposes, having about three years of experience at financial sector will make myself, I believe, much qualified as well.
I'm Algerian, 37 years old 15 years experience in oil and gas field
Petroleum engineer to SNP PETROM SA -National oil company-
A Mechanical engineering bachelors degree holder with twelve years experience in the oil industry with three years Refinery operations experience at the Mombasa Kenya Petroleum Refineries Limited (KPRL). Six years as Terminal Operations Superintendent and three years as a Training Specialist.
Welding Inspector/Engineer IWE& CSWIP3.1 & NDT(U.T & M.T & P.T &R.T) & Authorized Welding Coordinator of DSD Ferrometalco Company
Experiense Drafter / Designer
SAP MM
Cad Engineer (Planning Department)
Chemist, Research Chemist, Analytical ChemistCtechnical support
11 years of experience in Erection & Installation, Engineering, Design, Commissioning, Inspection and other Management activities in the field of Terminal Automation, Gas Metering, Refinery, Gathering Centers and others.
specification of field instruments and AC800 logics to ESD /F&G
Construction Superintendent Electrical Instrument
I am diploma in mech engg,i have 5yrs exp designing field,now iam working with Proserv dubai(oil field) company as a instrumentation & mech CAD designer.Iam looking same position
Preparing of the JSA, Holding of toolbox talk meetings, managing safety inventory and reporting
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   [ 125 ]   126   127   128   129   130   131   132   133   134   135   136   137   138   139   140   141   142   143   144   145   146   147   148   149   150   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com