Resume - Shaped Charge Engineer

Misco Jobs

Resume #11353

CONTACT INFORMATION:
View contact information...

EDUCATION BACKGROUND
* Sept. 1992 - Jan. 1997, Explosives and blasting engineering, Queen's Univ., Kingston, Ont., Canada. Ph. D. obtained.
* Sept. 1983 - July 1986, Explosives and blasting engineering, Central South Univ. of Technology, Changsha, China. M. Sc. obtained.
* Sept. 1979 - July 1983, Mining Engineering, CSUT, Changsha, China. B. Sc. obtained.

EMPLOYMENT EXPERIENCE
August, 2004 - Present, Petro Ballistics Engineering, Calgary, Canada
Industry Consultant

Feb. 2003 - July, 2004, Senior Explosive Product Designer
Innicor Subsurface Technologies, Calgary, Canada
* Using my own design theory and approaches, designed and commercialized Canada's second generation shaped charges - X-caliburTM charges.
* Customized liner powders using shock physics principles, resulted in the use of special metal powders as liner compositions which helped to enhance charge performance.
* Completed a project to innovate the hydraulic/pneumatic systems of liner presses with great success. At the closure of the project, the manufacturing efficiency was more than doubled. The time needed to make one liner reduced from 40 to 18 seconds. As a result, the manufacturing capacity was doubled and labor costs of products significantly decreased.
* Pioneered the use of a new zinc alloy as charge case material. Characterized by low cost, high strength and debris-free after shot, the material is especially suitable for certain types of charges.
* Responsible for and provided engineering support for safety and manufacturing of daily operations of the shaped charge facility.
* Responsible for and provided engineering support for marketing of the company's oil well explosive products.

Feb. 2002 - Jan. 2003, Industry Consultant
* Providing consulting service in shaped charge and detonator design, development and manufacturing to the industry.
* Clients included DYNAenergetics (formerly DYNAmit Nobel), Troisdorf, Germany

Feb. 2001 - Jan., 2002, Senior Ballistics Engineer
Owen Oil Tools, Core Laboratories, Fort Worth, USA
* Responsibilities included development and manufacturing of shaped charge products, and detonator products.
* Involved in Owen's China Project. Successfully won and completed a contract to make offshore charges for Bohai, China. It was the first time ever that Owen made shaped charges overseas.

Feb. 1997 - Feb. 2001, R & D Engineer, Energetic Materials,
Prime Perforating Systems Ltd, Calgary, Canada
* Being the sole designer, designed and commercialized Canada's first generation of oil well shaped charges, the PrimexcaliburTM line of charges, a historical event in Canada's petroleum industry.
* Involved in the establishment of Canada's first shaped charge facility.
* Involved in the design and building of shaped charge (liner) manufacturing machinery (liner and load presses).
* Invented, prototyped and patented a safe detonator system for oil/gas well perforating (the work resulted in two patents (USP 6,211,682 B1, USP 6,470,803 B1) in the US and Canada.

* Sept. 1992 - Jan. 1997, Research and Teaching Assistant, Queen's Univ., Kingston, Ontario, Canada
* Investigated, theoretically and experimentally, explosive energy use in creating mechanical effects.
* Involved in the teaching of undergraduates explosives and blasting technology.

* Sept. 1986 - Aug. 1992, Explosives and Blasting Engineer, Beijing General Research Institute of Mining and Metallurgy, Beijing, China
* Invented and manufactured China's MAGNADET detonator system for mining and perforating industries, resulted in patents.
* Involved in the development of non-primary explosive detonators for mining.
* Involved in the development of innovative blasting and mining methods, mainly used in underground metal mines.

PUBLICATIONS
List of academic publications, patents in various countries, research reports, presentations and technical memos on explosives, detonators, shaped charges, well stimulation reagents and rock blasting technology, available upon request.

MEMBERSHIP
1. International Society of Explosives Engineers;
2. International Society of Petroleum Engineers;
3. Canadian Institute of Mining and Metallurgy.

References
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5701 to 5750 of 9785)

Go to Search Parameters...

Brief Description

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

Certificates in H2S Alive, W.H.M.I.S., and class 5 airbrakes. Work history includes warehouse work, shipping and receiving, loading and unloading trucks, driving forklifts and pallet drivers, and customer service

Post Applied Document Controller

Main job is Seismic Processing Analyst The main Projects 2D, 3D (land &marine), AVO All Projects works include; pre-stack processing, post-stack Processing ,and migration(PSTM_some Projects) ,Velocity Analysis AND build modules , finalizing these projects by writing the processing reports

Geologist looking for employment in the Oil Industry

Training for Entry Position for Oil and Gas Industry (Floorman), Engineer Degree for Fisheries, Experience working for Major Projects and at the Sea, ourdoors and long hours

Oil and Gas Piping and Ppeline Designer And Expert in all Drawings and Design Related to Pipeline

I have 2-3 years experience in drivin overhead gantry cranes both in cab and pendant. I also have 4-5 years experience in rigging and lifting

More than five (5) years working experience in Non-Destructive Testing and Engineering Inspections for Onshore / Offshore and refineries industries. Worked with varios major client e.g Petronas Carigali Sdn. Bhd, Petronas Gas Berhad, Optimal Chemicals (M) Sdn. Bhd, Exxon Mobil Exploration And Produ

I have 5 years Pre-commissioning, Commissioning and Operations experience in

Professional Landman

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

A Highly Motivated, Vastly travelled and Adaptable Drilling Specialist With over 25 yrs of on/offshore experience – Africa, Middle East and South East Asia – who offers: Expertise in drilling rigs operations, support and mgt; well engineering, HSE coordination; Training, HR mgt & Recruiting.

Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.

Shaped Charge Engineer

Looking for ad-hoc project accounting work

Flow Assurance Engineer

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Petroleum engineering with reservoir engineering & field development experience

Knowledge of fire protection systems and maintaining the safety audit system

Bachelor degree in Petroleum and Natural Gas Engineering May – 2007.

GOOD APTITUDE,COMMUNICATION SKILLS,MANAGING SKILLS,TECHNICAL SKILLS

Piping Engg. skills including

Becholar in chemical Engineering (production / project)

Navigational skills, Stability, Mangement

Mechanical piping supervisor

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Bachelor of Agriculture Science (Honors): 1995-1998 Major in Economics U of A, Excellent communication, trouble shooting skills and professional knowledge gained through interaction with public and running own business for the past 3 years.

EDUCATIONAL QUALIFICATION:DIPLOMA IN CHEMICAL ENGINEERING,job at present: SOHAR REFINERY COMPANY LLC, SOHAR, MUSCUT, OMAN,and actively involved in precommissioning and commissioinig activities.i have total 11+yrs of experience in refinery/petrochemical industries.

Electrical Resistivity geophysical investigation (ABEM Terrameter SAS-300), Topographic Survey (SOKKIA SET 5F), Global Positioning System (GARMIN), GIS

Autocad & Inventor Draftsman

A Drilling Engineer with expertise in drilling rig supervision, development of drilling, work-over and abandonment procedures. Excellent interpersonal skills combined with the ability to work collaboratively with other team members have been my formidable strengths.

B.E. Petroleum, Working in Workover Department

Looking for career in oil and gas

Having Good Experience in Onshore Crude Gathering Centers & Petrochemical Industries at working platforms like Maintenance and Shutdown.

Exploration, Development, Workover, Deviated Well Drilling Supervisor

Diploma In Instrumentation Engineering In Aug 1988 (3 Years Duration) +Amie Eqvt To B.E

DCS Engineer With Yokogawa CS3000 experience

An effective engineer possessing good communication skills, combined with proven technical and organizational abilities. Education, qualifications and experience gained through significant design applications and management positions performed in the US and the Middle East.

Project Leadership: project development, estimation, engineering, installation, field start-up and commissioning.

Electrical and Electronic background. Experience with ESPs, Completions and Production Engineering

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Offshore Field Engineer with 2 years experiance in shypyard and 3 years onshore/offshore.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

Microsoft enterprises systems, Great Plain ERP, SharePoint services SQL Server 7\2K\2k5, Exchange Server 2k\2k4, ISA Server 2k\2k4, IIS 6.0, Manufacturing (Planning ERP, Execution MES, SCADA, Process Controlling) Active Directory, DNS, Windows Servers, Desktop, POS, PDA NT\2K\2k3\XP\Vista VBA\Access

Obtained Greenbelt Certification from DaimlerChrysler and Black Belt Steering Committee for solving a complex rear door window noise issue on Dodge Durango by using Shainin methodology.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 [ 115 ] 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out