CONTACT INFORMATION:
View contact information...
QUALIFICATION
Bachelor of Science in Mechanical Engineering
Mapua Institute of Technology, Manila Philippines
Registered Mechanical Engineer, Board of Mechanical Engineers
Philippine Professional Regulation Commission
PROFESSIONAL: ASME (American Society of Mechanical Engineers)
ORGANIZATION Member - 2000 to Present
CAREER SUMMARY
Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes OFFSHORE/ONSHORE, LNG, Oil Sands, GAS plant, petrochemical, chemical, and other industries. Have participated in different phases of projects from Basic Engineering, FEED/Conceptualization, to Detail Engineering through construction, commissioning/start-up, and operations/maintenance. Has extensive experience in EPC and Consultancy Oil and Gas companies. Obtained and Certified in BOSIET & EBS-OPITO UK - Offshore survival training and HSE.
KEY ASPECTS
- Lead Engineering for offshore and onshore oil & gas, gas plants, LNG and petrochemicals projects FEED/Conceptualization and Detail Engineering
- HAZOP / HAZID studies, HFE (Human Factor Engineering)
- ASME Section 8 Div. 1 & 2 Vessel; TEMA, API 660/661/662 Heat Exchangers; API 650 Tanks, BS 2654 Tanks, BS 7777 Tanks, API 620 Tanks, API 560/530 Fired Heaters, ISO Fired Heaters; API 610, 674, 675, 676, 681 Pumps; ANSI/ASME Pumps; API 617, 618,619 Compressor; API 673 Fans; API 611,612, 616 Turbine; Steam Generators, Cooling Towers, AHU, Material Handling equipment.
- Technical Bid Evaluation and Sound and familiarity of oil & gas vendors in the region
- Familiarity with international standards API, ASME, BS, DIN, DEP, PTS, ANSI, ASTM, TEMA
- Review of Vendor Documents: Fabrication drawings, GA drawings, operation & maintenance manuals, procedures, data book,
Diagrams
- Preparation of Tanks (API 650/BS 2654) Fabrication drawings
- Client/Vendor liaison
- Compress Vessel, AutoCAD, Microstation, Intergraph PDS, HTRI
- Construction and erection, Start up and commissioning, Operation and Maintenance experience
PROFESSIONAL EXPERIENCE
September 2005 - December 2007
ELECTROWATT-PÖYRY ENERGY (BRUNEI) SDN. BHD
BRUNEI SHELL PETROLEUM / LNG PROJECT
Kuala Belait, Brunei
Lead/Senior Mechanical Engineer
(Rotating/Static/Package Equipment)
Working exclusively on the Engineering Services contract with Brunei Shell Petroleum Sdn. Bhd. Design Engineering Services Onshore and Offshore Facilities Including Design of New Facilities, Rejuvenation and Revamp. FEED and detailed engineering for Liquefied Natural Gas and crude oil offshore platform & onshore facilities.
As a Lead Mechanical Engineer:
Estimate man-hours. Prepares mechanical deliverables list. Attends kick-off meeting with the client and vendor. Monitor and control man-hours and progress. Reviews and approves specifications, requisitions, drawings, and technical bid evaluation. Attends progress meetings. HSE Implementation
As a Senior Mechanical Engineer:
Design vessel, storage tanks, package equipment, heat exchangers, fired heaters, utilities equipment: steam packaged boilers, AHU, cooling towers including welding procedures, non-destructive and hydrostatic testing procedures. Technical Bid evaluation and vendor document/data reviews. Reviews Control and automation systems and how that interfaces with machinery. Plant and equipment installation, commissioning and maintenance procedures. Oil and gas process design. Material selection for different process and environmental conditions. Integrity issues on static equipment. Prepares mechanical man-hour estimation norms. Prepare man-hour estimate prior to the start of project. Provides expertise to all design phases of a Work Order for rotating and static equipment. Ensures design packages meet the required safety, environment and ergonomic standards. Supports drawing office personnel with engineering input. Relates rotating equipment to piping and vessel and fabrication procedures.
Pumps, compressor and all rotating machinery design, package equipment, specifications, and selection, especially with regard to compressors (centrifugal and positive displacement), gas turbines, pumps (centrifugal and positive displacement), seal design, performance testing. Preparation of requisition for Rotating Equipment packages. Technical bid evaluation and vendor document/data reviews. Plant and equipment installation, commissioning and maintenance procedures. Piping Design and fabrication procedures.
SHELL PROJECTS INVOLVEMENT:
1. CHAMPION-07 FIREWATER UPGRADE PROJECT (Topside Offshore Platform)
2. AMPA-09 Compressed Air Detailed Design & Installation (Topside Offshore Platform)
3. LNG Underground Tank Replacement (LNG)
3. GECKO PHASE "A" PRODUCTION Project - OIL SANDS (Onshore Drilling &Wellhead Facilities)-FEED and Detail Engineering
4. SEWJ-19 Drilling & Wellhead FEED & Detailed Design & Engineering (Offshore Wellhead Facilities)
5. AMPD-15 Offshore Platform Instrument Air Compressor Replacement
6. SHELL – Seria Crude Oil Terminal Rejuvenation & Expansion Project (Tank Farm, Jetty & Crude Distillation Unit)
7. Shell Industrial Gas Plant Terminal (LNG) with Tie-in to Brunei LNG
8. Seria - Crude Oil Terminal Emulsion Treatment Plant Train 1 and Train 2 Upgrade Project (Heat Exchangers and Tube Bundle Replacement)
9. New Pipeline Inspection Workshop for OCTG at STL Muara: Design and Engineering of Booster Pumps, Submersible Effluent Pumps, Jockey Pump Package, and Diesel Engine-driven Firewater Pump Package
10. Crude Oil Terminal T-150 & T-170 Upgrade-Conceptual Design Project – Design and engineering of big centrifugal pumps with 800 m³/hr capacity
11. BLNG Boil-Off Gas Compression Expansion – Basis of Design/Conceptualization/FEED/Detail Engineering
APRIL 2005 – AUGUST 2005
SIME DARBY ENGINEERING SDN. BHD.
Kuala Lumpur, Malaysia
Lead/Senior Mechanical Engineer
(Rotating/Static/Package Equipment)
Sumandak Platform-A and Tie-ins to Existing Platforms (OFFSHORE) PETRONAS CARIGALI SDN BHD, SABAH, MALAYSIA
MECHANICAL LEAD ENGINEER for detail design. Assigned at Head Office in Kuala Lumpur
Working on PETRONAS Sumandak Offshore Platform Design project in a capacity of Mechanical lead engineer. Preparation of mechanical deliverables. Interdisciplinary review and discipline design checking. Attending client, vendor, interdisciplinary, meetings.
Design and engineering of static equipment, rotatng equipment and package equipment. Equipment design including seal design, performance testing, automation and control system for equipment. Preparation of specifications, datasheets, all attachments and requisition for rotating and static equipment packages, technical bid evaluation, and reports for offshore platform. Preparation of equipment list. Design and calculation of static equipment such as vessels, tanks, and prefabricated tanks and fabrication procedures. Prepare mechanical datasheets. Design of vessel and their fabrication procedures. Estimating engineering man-hours. Interdisciplinary review of drawings and documents such as P&ID, UFD, PFD, valves, instruments, layout, process data sheets, electrical equipment motor data sheets, instruments data sheets. Submission of piping deliverables: general arrangement equipment drawings, escape routes, MTO, PDMS modeling, pipe supports, piping plan, isometrics, piping specification, and mechanical design philosophy. Planning and schedule.
AUGUST 2003 – DECEMBER 2004
SUMATEC ENGINEERING SDN. BHD.
Kuala Lumpur, Malaysia
Lead/Senior Mechanical Engineer
(Rotating/Static/Package Equipment)
Worked in a capacity of Mechanical lead engineer. Preparation of mechanical deliverables.
Design and calculation of static equipment such as vessels, tanks, heat exchangers and prefabricated tanks and rotating equipment. Design of steam packaged boilers, AHU, cooling tower, and material handling equipment. Preparation of API 650 Tanks Fabrication drawings. Detail Calculation of API 650 Tanks and BS 2654 Tanks. API/ANSI Pumps and rotating machinery design, specifications, and selection, especially with regard to compressors (centrifugal and positive displacement), gas turbines, pumps (centrifugal and positive displacement), seal design, performance testing. Preparation of requisition for Rotating Equipment packages. Technical bid evaluation and vendor data reviews. Preparation of piping specification. Review of static equipment integrity. Prepare Requisition for Quotation package and specification for turbine, compressor and pumps including automation systems. Preparation of outline drawings and datasheets. Prepare datasheets and specification for tender and project for rotating equipment. Material selection for vessel and piping. Preparing specifications and RFQ package for static & rotating equipment. Preparing calculation templates for static & rotating equipment calculations. Review of vendor drawings and documents. Review of fabrication drawings and engineering drawings. Technical bid evaluation and vendor selection and recommendations. Preparing norms for estimating engineering man-hours. Preparing proformas for engineering deliverables.
PROJECTS INVOLVEMENT:
1. Fuel Oil Blending and Bunkering Facility at Port Tanjung Pelepas
TANJUNG PELEPAS TERMINAL SDN BHD
Johor, Malaysia
2. Implementation of Upgrading Works on Funadhoo Island
STATE TRADING ORGANIZATION PLC
Republic of Maldives
3. ABF Bintulu Revamp Project,
PETRONAS ASEAN BINTULU FERTILIZER
Sarawak, Malaysia
4. WMC Energy Project – Design and engineering of 30 MW Gas Turbine and several equipment
TENTRIK Technologies
Bukit Nanas, Seremban, Malaysia
1998 –2003
FLUOR DANIEL INC. PHILIPPINES
(FLOUR Company, GHQ in Houston, Texas, USA)
Manila, Philippines
Mechanical Engineer/Associate Design Engineer III
(Rotating/Static/Package Equipment)
Design of vessel, storage tanks and Heat exchangers including welding procedures, non-destructive and hydrostatic testing procedures. Preparation of specification for vessel and attached piping and accessories including material selection. Design of steam of steam packaged boiler, AHU, cooling tower, and API/ANSI rotating equipment including selection and its control automation control system. Prepare Requisition for Quotation package and specification for static and rotating equipment. Vendor Document Review. Prepare Mechanical Data Sheets. Prepare Hydro Test Package. Prepare engineering installation package, inspection test plan, start up procedures, and equipment data sheet. Provide engineering support to other engineering discipline. Preparation of installation equipment procedures, commissioning manual & procedures, and maintenance operation procedures. Technical Bid evaluation. Vendor recommendation. Review of vendor documents and drawing. Performance testing procedures. As-building of data sheets and mechanical equipment SAP data base. Material selection for vessels, heat exchangers, and rotating equipment construction that suits to environmental conditions. Interdisciplinary review of drawing of engineering drawings.
PROJECTS INVOLMENT:
1. TOTAL EXPLORER PROJECT-OFFSHORE FPSO, TOTAL FINA ELF
Moho-Bilondo, Republic of Congo
2. BP (TOLEDO) FRONT-END ENGINEERING PROJECTS for TOLEDO REFINERY and BPSH BP TOLEDO
Texas City, Houston, Texas, USA
3. CITGO CRUDE EXPANSION AND CONVERSION OPTIMIZATION PROJECT CITGO
Lake Charles, Louisiana, USA
4. CONOCO PHILIPS LOW SULFUR GASOLINE PROJECT
Ponca Cuty, Oklahoma, USA
5. HAMACA CRUDE UPGADER PROJECT HAMACA
Jose, Venezuela
6. SHELL GOAL VENTURE PROJECT
SHELL CHEMICAL COMPANY
Geismar, Louisiana, USA
7. PETROCHEMICA Bahia Blanca
DOW CHEMICALS
Argentina
1996 – 1997
NIDEC PHILIPPINES CORPORATION
Laguna, Philippines
Engineering Supervisor
(Rotating/Static/Package Equipment)
Prepare Requisition for Quotation package (RFQ) and specification for static and rotating equipment: Diesel Generator, storage tanks, industrial gas equipment, pumps, air compressor package, steam packaged boiler, AHU, cooling tower. Select rotating equipment and make packages for quotation and technical bid evaluation. Prepare of specifications and design drawings for bidding bid evaluation and make recommendations for equipment and construction projects. Provide material and labor estimates for equipment installation and construction projects. Technical bid evaluation. Perform Vendor Document Review. Facilities maintenance management. Project management. Commissioning and start up. Conducts safety training for plant personnel and contractors. Ensure work assignments and inspections are completed in an efficient and cost-effective manner and ensure worker compliance with safety regulations. Technical bid evaluation and vendor recommendation.
1994 – 1996
SUGARLAND INTERNATIONAL INC.
Manila, Philippines
Mechanical Engineer/ Maintenance Supervisor
(Rotating/Static/Package Equipment)
Prepare Requisition for Quotation package (RFQ) and specification for API static and API/ANSI rotating equipment. Such as pumps, air compressor packaged vessels, blender, packing machine, roller & belt conveyor, steam packaged boiler, cooling tower, vacuum pump, rotary heater, rotary conveyor. Select equipment and make packages for quotation and technical bid evaluation. Prepare of specifications and design drawings for bidding. Prepares technical bid evaluation and make recommendations for equipment and construction projects. Provide material and labor estimates for equipment installation and construction projects. Project management.
Facilities' Maintenance management and supervision. Commissioning and start up.
1992 – 1994
UNILOX CORPORATION
Pasig City, Manila
Junior Mechanical Engineer
(Rotating/Static/Package Equipment)
Prepare specifications and documents needed in the implementation of approved project such as: detailed drawings, equipment specifications, datasheets, outline drawings, contract documents, project plan and schedule. Prepare Requisition for Quotation package and specification for static and rotating equipment such instrument API air compressor package, API/ANSI pumps, centrifuge, decanter, steam packaged boiler, cooling tower, AHU, ASME vessel, and dust collector. Perform drafting works. Perform technical bid evaluation and vendor document review. Assist Maintenance Group in the implementation / commissioning of new upgraded equipment. Performs other duties that may be assigned by superior. Provide material and labor estimates for equipment installation and construction projects. Project management. Commissioning and start up.
PROJECT AWARDS AND CITATIONS
1. Spotlight Award given at Manila Fluor Daniel Office in May 2003 for BP Toledo Project
2. Cash Cheques Awards for Shell Project given in Manila Fluor Daniel Office for detail engineering
3. MVP employee award given in Manila Fluor Daniel Office for Kodak project for detail design.
TRAININGS AND SEMINARS
1. BOSIET-EBS (Emergency Breathing System) - MEGAMAS Training Co. Sdn Bhd,Kuala Belait, Brunei Darussalam;
05 June 2007
2. TROPICAL BOSIET INCLUDING TRAVEL SAFETY BY BOAT-OPITO Approved (Helicopter Safety & Escape, Sea Survival, Boat
Safety & Escape, First Aid, & Fire Fighting & Self Rescue); MEGAMAS Training Co. Sdn Bhd,Kuala Belait, Brunei Darussalam;
27-29 September
3. HSE (House Safety and Environment) FAMILIARIZATION FOR SENIOR STAFF; MEGAMAS Training Co. Sdn Bhd; Kuala
Belait, Brunei Darussalam; 21 September 2005
4. SIMULATED PROJECT TRAINING FOR FDIP MECHANICAL ENGINEERS; FLUOR DANIEL INC. PHILS; Muntinlupa, Philippines;
19 September – 19 November 2001
5. TECHNICAL SEMINAR for Mixed Flow Fans, Energy Recovery Ventilators, Dampers & Louvers, and fans & Blowers; GREENHECK
FAN CORP./FARENHEIT INC.; Makati City, Philippines; 12 September 2002
6. STRATEGIC PLANNING SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002
7. LEADING FROM THE FRONT LINE; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002
8. 9 TRAITS OF HIGHLY SUCCESFUL WORK TEAMS; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002
9. HOW TO LEAD A TEAM ; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002
10. 4-DIMENSIONAL LEADERSHIP; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; March 2002
11. PERSONAL EFFECTIVENESS; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; February 2001
12. INTERPERSONAL COMMUNICATION SKILLS; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; February 2001
13. HIGH IMPACT BUSINESS WRITING; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; December 2000
14. GETTING THE RESULTS YOU WANT; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; December 2000
15. PARTICIPATING IN PROJECT TEAM; SKILLSOFT WEB-BASED TRAINING; Muntinlupa, Philippines; December 2000
16. MICROSTATION; FLUOR DANIEL INC. PHILS; Muntinlupa, Philippines; 4-11 August 1998
17. INTERGRAPH PDS PIPING MODELING; FLUOR DANIEL INC. PHILS; Muntinlupa, Philippines; 17 August – 04 September 1998
18. INTERGRAPH PDS EQUIPMENT MODELING; FLUOR DANIEL INC. PHILS; Muntinlupa, Philippines;
17 August – 04 September 1998
19. DOCUMENTING QUALITY SYSTEM; SGS PHILS., INC.; Muntinlupa, Philippines; 26-27 November 1998
20. PNEUMATICS FOR LOW COST AUTOMATION; SMC PNEUMATICS PHILS.; Paranaque City; 07-10 June 1994
NON TECHNICAL TRAINING
1. TEAM BUILDING PROGRAM; TIME; Muntinlupa, Philippines; 14-15 November 1998
2. PROCESS/MECHANICAL TEAM BUILDING PROGRAM; FLUOR DANIEL INC. PHILS; Antipolo City, Phils.; 23-24 August 2002
View contact information... |