Resume - Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Misco Jobs

Resume #11886

CONTACT INFORMATION:
View contact information...

ACADEMIC QUALIFICATION:
B.Tech. Chemical Engineering passed out in May'93,
Regional Engineering College –Tiruchirapalli, India
First class with Distinction

PROFESSIONAL SKILLS:
1. Hands on experience in implementation of Advanced Process Control system (DMC plus & Connoisseur) and Kinetic Model development& parameter tuning (FCC Rx/Rg). Familiar with Real Time Optimization (ROMeo) and Advanced Rigorous Performance Monitoring system (ARPM).
2. Hands on experience in steady state process simulation (HYSYS, PRO II, ASPEN PLUS, HTFS, ACOL, HEXTRAN, PIPESIM (hydraulic), FLARENET (flare network), FRED (flare radiation/dispersion)) and Dynamic Simulation (HYSYS DYNAMICS, NATASHA (surge analysis), OLGA (Surge and Slug analysis)).
3. Hands on experience in Process Engineering of Refinery (Crude & Vacuum, Hydrotreaters, Fluid catalytic Cracking), Oil & gas (Separation, Gas treating (Amine treating), Stabilization, dew pointing, sulphur recovery units) and Petrochemical industries (Linear Alkyl benzene, EPI chloro hydrin and Platinum reformer units)
4. Hands on experience in Commissioning & Operation of Refinery and Petrochemical units (Crude and Hydrotreaters, EPI chlorohydrins plants.)
5. Having expertise in conceptual, basic engineering, detail-engineering activities and process engineering in an operating plant. Also familiar with DCS operation and operation practices.
6. Conversant with Shell Design Engineering Practices, Parsons Engineering Practices and API codes.

SUMMARY OF EXPERIENCE: Total years of experience - 12

July 2003 – Present Process Engineer – Parsons Oman Engineering LLC –Muscat.
1.Worked as Lead Process Engineer for pre front-end engineering of a complete gas plant – Revamp of existing 540 MMSCFD Thammama C gas plant –GASCO-Abudhabi. The major activities are
- Simulation of Separation, stabilization, amine treating, gas dew pointing/turbo expander and sour water stripper units in HYSYS. Heat and Mass balance generation.
- Rerating of all process equipments including separators, stabilizer columns, amine absorber, amine regenerator, glycol contactor, turbo expander, exchangers, air coolers, pumps and control valves/ hydraulics.
- Review of relief valves, flare systems and safeguarding systems.
- HAZOP review of all the plants including sulphur recovery units.
- Dynamic simulation of separator section.

2. Involved in conceptual study for expansion of Oil gathering station (Al Huwaisah –PDO-Oman). The major activities are
3. Worked as a Process Engineer for revamp of Oman Refinery Crude unit
4. Working as a process engineer for basic and detail engineering of oil gathering station (separators, flare system, oil pumping system, pipeline)

Note: Basic Engineering includes simulation, heat and mass balance, hydraulics, equipment design /data sheet preparation, design, HAZOP and IPF review etc

Jan 2001 – June 2003 Advanced Process Control and Simulation Engineer – SIMSCI (Invensys India.)

1. Responsible for implementation of Advanced Process Control system and Traditional advanced Process Control system The major activities carried out are
- Implemented APC (DMC +) for Reliance Crude and Vacuum Unit. This include the preliminary analysis of the plant, DCS Controller tuning, Heater Pass balancing, Step testing, Modeling, Controller configuration, Simulation and Commissioning. Inferential Model development with Aspen IQ. Controller Size: 37 MV x 55 CV, Inferentials – 11
- Implemented APC for Dairy Units (2 units) with Connoisseur on Foxboro DCS. This include DCS Controller tuning, Step testing, Modeling, Controller configuration, Simulation and Commissioning.
- Implemented traditional advanced control system in VVF petrochemical industry, Shasun pharma Industry.
- Involved in feasibility study for implementation of APC in for Hydrotreater, FCC, and Reformer.

2. Hands on experience in model development (equation formulation) and parameter tuning of FCC Rx/Rg kinetic model for Chennai Petroleum Corporation limited.
3. Involved in Real time optimization model building for Reliance Refinery (India) Naphtha Management Program.
Involved in feasibility study to implement real time optimization package for Reliance Jamnagar Aromatic complex which include feed naphtha component optimization. As part of the study, model developed for crude, FCC, Coker naphtha splitter sections.
4. Involved in the proposal preparation for integrating various refinery and aromatic complex models with APC.

5.Responsible for SIMSCI's Simulation Products Technical support (PRO II, HEXTRAN, INPLANT, VISUAL FLOW, DATACON). The major activities are
- Customer technical support –
Major simulations carried out part of customer support: Hydrocraker unit for Mangalore Refinery, Crude and FCC units for Chennai Petroleum and separation and stabilization section for Cairn Energy and KTI.
- Customer training
– Training provided on PRO II, HEXTRAN and DATACON for Indian Oil Corporation, Haldia Petro Chemicals and Indian Institute Technology Delhi.
- Simulation solution – Simulation of FCC Gas plant for an Indonesian Refinery as a part of feasibility study to implement real time optimization package.
Simulation and optimization of acetic acid plant for EID Parry.
- Product testing – Involved in testing of distillation and flash model for real time optimization package (ROMeo).

Feb 1998 – Jan 2001 Assistant Manager (Process) – Crude and Hydrotreaters at Reliance Petroleum Limited – 1 ½ years
Assistant Manager (Process) – Hydrotreater and Fluid Catalytic Cracker at Nagarjuna Oil Corporation – 1 ½ years.
1. Involved in Basic Engineering, detail engineering, precommissioning and Commissioning of crude and hydrotreaters (diesel & VGO) units in Reliance Petroleum and involved in basic engineering of hydrotreater (diesel) and Fluid Catalytic cracker unit in Nagarjuna Oil Corporation.
2. The major activities carried out in Reliance Petroleum Limited are
Basic and Detailed Engineering - the PFD, P&ID, cause and effect diagram, Equipment drawings, vendor drawings, DCS graphics operating manuals review/preparation. Review of consistency of units interconnection, unit integration, startup and shutdown requirements, unit's material and energy balance.
- Simulation of crude column, VGO Hydrotreater Fractionation., air coolers carried out to review the adequacy of the units for different modes of operation.
- Inspected all the static equipments and piping loops and modified / solved few design / fabrication mistakes.
- Prepared commissioning procedures.
- Prepared Daily Performance monitoring procedures and prepared Guarantee test run plan.
- Involved in catalyst evaluation for hydrotreater and FCC catalysts
- Involved in process review of Hydrotreater, Sulfur Recovery and Merox units along with Shell Global Solutions
- Involved in corrosion audit of Hydrotreatres, Hydrogen and Sulfur plants
- Undergone training in Hydrotreating and FCC technologies by UOP.
- Involved in preparing commissioning procedures the entire refinery and Aromatic complex.
- Studied entire refinerie's Steam and Power Balance
- Involved in Solomon Associate's Energy audit.
3. Involved in Basic engineering for revamp of Crude, Hydrotreater and FCC units.
Simulated crude, hydrotreater fractionation and FCC units-gas plant. Generated heat and mass balance for the revised capacity.
Design check carried-out for all the major equipments excluding reactors. (Columns, exchangers, air coolers, pumps and control valves)
4 The major activities carried out in Nagarjuna Oil Corporation Limited – Diesel Hydrotreater and Fluid Catalytic Craker.
- Involved in Basic Engineering of diesel Hydrotreater and FCC.
- Involved in licensor evaluation for Hydrotreater, Hydrogen and Sulfur plants
- Involved in the refinery configuration fixing after analyzing Mobil plant configuration, future product specifications.
- Involved in the conceptual integration of various units common process facilities
- Inspected columns and vessels in the Mobil plant before dismantling.
- Prepared Startup /shutdown / Normal operating procedures for crude, hyrotreater and FCC units.
5. Involved in expansion study (form 105 KBPSD to 125 KBPSD). Simulated Crude unit in Aspen plus and checked /modified crude column diesel section to process higher capacity.

June 93 to Jan 98: M/S TAMILNADU PETROPRODUCTS LTD
Process Engineer LAB (Hydrotreater / Molex) and ECH Plant for 2.5 yrs and Operation engineer LAB front end (Hydrotreater and Molex) and ECH for 2 yrs.

TPL is one of the leading petrochemical Industry in the south India producing Linear Alkyl Benzene (85,000 TPA) and Epichlorohydrin (10,000 TPA) and is the first LAB plant implemented Advanced Process Control System IDCOM by Setpoint.

Nature of the Job
1) Daily performance monitoring, Trouble shooting, carryout modifications, Pressure survey, improvement/ optimization activities etc (Typical process engineering activities in an operating plant)
LAB plant consists of UOP kerosene hydrotreater, UOP Molex, UOP Pacol ( Plat reformer) and UOP Alkylation process. ECH plant consists of M/s Conzer's ALC and ECH process.
2) Operated LAB front end (UOP Hydrotreating and UOP Molex process) and ECH plant from DCS.
3) Ensuring the equipments availability and Releasing equipments for maintenance
4) Raw materials planing requirement and product / raw materials reconciliation.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 10923)

Go to Search Parameters...

Brief Description

5yr experience in Piping Design (PDS), Layout Planning, Project Planning & Management, Erection supervision & support.

I have experience in drilling, formation evaluation and geosteering

Piping Design Engineer With One Year Experience In Preparation of Plot plan & Key plan,General Arrangement Drawings,Nozzle Orientation for Process Equipment,Isometric Drawings with Bill of Material,Equipment & Piping Layouts.

Have passion and experience working in oil and gas industry mainly in mantainence services.

I am a person of cheerful disposition,taking instructed tasks reasonable easy all the times but affable with a will to succeed in

Intersted in refinery, explorationtion & process operations

API-510 inspector and level II NDE RT,UT,MT,PT,VT. College educated with turnaround inspection experience in refineries. Chemical plant, pipeline construction, power plants, and aerospace experience.

Industrial instrumentation and control

efficient deck maintenance,steering a ship,maintaining watch duties,good communication skills and qualification 10+2(physics,chemistry,maths,computer science)

B.COM , ASNT LEVEL II NDT INSPECTOR

Electrical Designer 12-1/2 Years of Exper. Layouts Cable trays/trench, Grounding, Power, Lightings, Tele Communication, Fire & Gas detectors, Multi Cable Transit (MCT) & related supports details. Single Line & Interconnection wiring block diagrams. Power / Instruments, Fire & Gas Cable Schedule etc.

My curriculum vitae includes detailed personal information as well as skills and qualifications, trainings and seminars.

I/E Designer, 28 years experience in the petrochemical industry along the Gulf Coast and in the oil industry in Alaska. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office. Experienced in working with other disciplines, clients, vendors & construction. Will travel

Power sector professional with over 20 years of experience in O&M of thermal power plants

B.E.Electronics and Instrumentation

Skilled geologist looking for an opertunity.

Self-confident, hardworking and familiriaty in team-work

A very skilled Geomodeler competent in the use of Schlumberger PETREL 2008 for Static Reservoir modeling and Hydrocarbon Volume Calculation with a solid background in Reservoir Engineering and the applications of PERFORM in Well Design and modeling, also with Quality HSE Training from Shell(SPDC)

Subsea Pipeline Design Engineer

Pipe Stress Engineer

2 years Experienced Offshore Field Engineer working in platform construction

B.E.Mechanical Engineering....skill known Auto cad Pro-E,Ansys,Plant Design System ,piping design,hass

DIPLOMA IN MECHANICAL ENGINEERING, AUTOCAD 2008, CADWOX PROFESSIONAL 2008,PVLITE 2005

ArcGIS, Oasis Montaj, Uxolab, AutoCAD, MathCAD

I have 3-D drafting skills in Auto Cad Inventor AutoCad 3-D wire Frame I also Have experince in creating electrical schematics for offshore equipment.

15 years of experience in plants operation as panel operator, plant operator, team leader, shipment coordinator and superintendent in venezuela in companies such as PDVSA and ExxonMobil in units such as naphtha hydroteater, hydrogen, amine, sour water, sulfur recovery and tanks movements

PROJECT/DESIGN ENGINEER FOR FIRE PROTECTION SYSTEM

Proven oil and gas manager

Production operator,wireline operator and mechanic.

Experienced Exploration Geologist with over fours years’ field experience.

Electrical techinician work on FPSO/Rig and power plant

Mechanical Engineer, with 11yrs exp, Specialized as Coating/painting engineer implementation of different types of coating techniques, practices, Corrosion control Operations, scheduling and monitoring. Been a Coating Inspector & QC Inspector & NACE Corrosion Inspector - Level 1

Construction of Transformer building Construction of Utility Building Construction of electroplating building. Construction of RCC Over Head water Tank Construction of Offices Buildings

B-tech Hons Mechanical

My Name is Asif Naeem &My Edgucation in Diploma of Mechanical Engeering&My exprience in Mechanical Techniction&Fabrication

landman

I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.

I am Electronics & Communication grad from India with more than 3 years of experience in Electrical & Instrumentation.I have through knowledge of SAP PM module.

Experienced Landman seeking a challenging work environment

BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.

Three years experience as an engineering tech, 10 years experience with data manipulation.

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

Snubbing / Workover Supervisor, Field Technician.

Senior Design Engineer - Electrical

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Working Offshore as an engineer and mechanic for 15 years

PDS Piping designer Engineer

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out