Resume - Control Systems Engineer (Programmer & Designer)

Misco Jobs

Resume #12067

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
10/04 to Date Interstates Control Systems Inc., Sioux Falls SD, USA.
System Integrator of Allen-Bradley and Intellution.
Food, Beverage and value added Agricultural Industry.
Control Systems Developer
Responsibilities were to program, test and commission DCS and PLC based Process Control Systems, Emergency Shutdown Systems, and Fire & Gas Systems for Offshore Platforms.
1. Programming (A-B ControlLogix) & HMI development (Intellution) of Soya Bean Oil Refinery for AGP, Omaha Nebraska.

08/03 to 09/04 Maverick Technologies, Houston TX, USA.
System Integrator of Yokogawa, A-B and Intellution.
Oil, gas and Pharmaceutical Industry.
Control Systems Design Engineer / Software Specialist
As Control System Design Engineer, responsibilities were to design and implement DCS and PLC based control systems for Offshore Platforms. As Software Specialist, responsibilities were to program, test and commission DCS and PLC based Process Control Systems, Emergency Shutdown Systems, and Fire & Gas Systems for Offshore Platforms.
2. Engineering, Design & Programming (Centum CS3000 & Yokogawa-Prosafe) of Benguela-Belize Offshore Platform Project for Chevron Texaco & Daewoo Shipbuilding and Marine Engineering (DSME).

10/02 to 08/03 Intech Process Automation Inc., Houston TX, USA.
System Integrator of Yokogawa, A-B & Wonderware.
Oil & Gas Industry.
Hardware Engineer
Responsibilities were to design and implement DCS and PLC based control systems for Offshore Platforms.
1. Engineering & Design (Centum CS3000 & Yokogawa-Prosafe) of Sanha Condensate Offshore Platform Project for Chevron Texaco & DSME& Daewoo Shipbuilding and Marine Engineering (DSME).

05/02 to 10/02 ICS Worldwide Inc., Clifton Park, NY, USA.
System Integrator of GE Fanuc & A-B.
Gas & Steam Turbines and Compressor Control Systems.
Controls Engineer
Responsibilities were to Program, Test, & Commission PLC based Gas Turbine Control Systems.
1. Programming (ControlLogix) & HMI (Wonderware) development for Ruston TA1750 Gas Turbines for Chevron Nigeria.
2. Programming (90-70 TMR) & HMI (Wonderware) development for Hispano-Suiza THM Series Gas Turbines for Sona Hess Algeria.

06/01 to 05/02 JCS Controls Inc., Rochester, NY, USA.
System Integrator of Rockwell Automation (Allen-Bradley).
Food & Beverages industry.
Controls Engineer
Responsibilities were to Program, Test & Commission PLC based control systems in Food and Beverages industry.
1. Programming (PLC5) & HMI (Panelview 1200) development for Batch Process Automation for Suiza Dairy Puerto Rico.
2. Programming (PLC5) & HMI (Panelview 550) development for HTST Process Automation for Kohler Mix Newington.
3. Programming (ControlLogix) & HMI (RSView32) development for S88 Batching & Digital In-Line Blending Application for Purdue University.

07/95 to 04/01 Innovative Private Limited, Lahore, Pakistan.
System Integrator of Allen-Bradley and Honeywell.
All industries.
Senior Application Engineer
Responsibilities were to Study, Analyze, Design, Program, Test & Commission PLC based control systems.
1. Bladder Unit Automation, SAGA Sports Sialkot, Pakistan.
2. Urea Plant Shutdown System Automation, Engro Daharki, Pakistan.
3. Load Shedding System Automation, Engro Daharki, Pakistan.
4. Load Shedding System Automation, FFC Goth Machi, Pakistan.
- DCS (Yokogawa Centum CS3000).
- Hybrid Controllers (Honeywell PlantScape, & A-B Process Logix).
- PLCs (A-B SLC500/PLC5/ControlLogix, GE Fanuc 90-70/30, & Prosafe/Moore APAC+/Quadlog).
- Vibration Monitoring System (Bentley Nevada 3300/3500).
- HMI/SCADA Software (RSView 32, Wonderware, & Intellution).
- Variable Frequency AC Drives (A-B 1305/1336).
- Communication Networks (A-B ControlNet/DH+/DH-485/RIO, GE Genius Bus, Yokogawa VNET/MNET, Ethernet, MODBUS and RS232).
- Instrumentation (Honeywell, Rosemount, Yokogawa, Foxboro and Brooks).
- Motor Control Centers MCC (Allen-Bradley and Cutler Hummer).
- Low Voltage Switchgear (Allen-Bradley and Schneider Electric)
- Microsoft Windows 95, 98, NT, 2000 and XP operating systems.
- Microsoft office and Microsoft Project.
- Drawing & Drafting Software (Autocad2000).

EDUCATION
1990 - 1995 University of Engineering & Technology, Lahore, Pakistan.
- B. Sc. Electrical Engineering (16 Years), %age: 76, Grade: A
- Good Spoken and Written English Communication Skills.
- Good Project Management and Engineering Skills.
- Good Bid Evaluation and Proposal Making Skills.
- Current Salary $50,000 per Annum
- Work Status in USA H-1B

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9001 to 9050 of 10916)

Go to Search Parameters...

Brief Description

Power Transmission Line & Lighting of Highways, Electrical Design & Low Voltage, Electromagnetic Field

Experienced involved problem solver with more than nineteen years of progressive experience, offering significant expertise in project management, manufacturing and oil and gas accounting management, and focused on management operations and am able to continue to learn new processes and apply them.

I am an advanced Scaffolder (CISRS), Advanced Scaffold Inspection, Risk Assessment Trained, and am Computer Literate. I have an extensive understanding of scaffolding and design, the importance of health and safety and the best ways to achieve the goal of supplying clients with a cost effective and

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

Very flexible, Diverse experience. Looking for a place to excel.

I have over 10 years as a driller and derrickhand

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

Experience in pipeline, Power Plat Installation

Technical Writing with 15 Years of Experience in the UAE

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Seeking Managerial or Supervisory position in Logistics & Transportation.

instrument supervisor 5 year experiance

Chief Enineer, Limited, Oceans, Unlimited HP

Jamiu Badmos is a Registered Engineer cum HSE Professional with over 9yrs experience in QHSE & Project Management

Experience in Automation Systems (Triconex Safety Control Systems, Honeywell FSC). Bachelor of Telecom/Control Systems Engineering. Experience in GCC countries. Currently working as an Application Engineer

23 Years of Various field of accounting

Director

I would like to apply for Engineer or any kind position which is suitable with my education background and experience. I graduated from Trisakti University majoring in Mechanical Engineering with GPA: 2.80 (scale of 4.00) in 1998. I offer skills through formal education and experiences.

Analytical skills to improve methods and procedures applying ESP and Gas Lift systems to develop exploratory well completions, workover jobs, water control, and general oil field operations. Knowledge of modern well construction (completions) operations and techniques.

I am mechanical engineer graduated in 1997 in Simon Bolivar University, Venezuela. I have five years experience in drilling operations. I have experience in HPHT, directional, high angle, exploration, onshore and offshore wells.

An Engineer working at Alcatel Egypt, S.A.E. MND division. Looking forward to change my carrier from telecommunication to Petroleum/ Gas/ oil. I am very energetic, willing to learn and have a very good team spirit. I love challenge and can work in any working environment and conditions.

I am a young man who has worked hard all and received little for his efforts, and what I have received is gone. I am looking for a new start in a new line of work that is more profitable than those jobs I have had in the past.

Radio telecommunications operator based in Amman/Jordan , have various work experience in coastal radio stations, on ships board, united nations . total experience over 5-years . Looking for good opportunity in oil/gas offshore, onshore projects : world-wide as RADIO OPERATOR

Shift Supervisor Shift Foreman Plant Operator

working in French company named Air liquide as a manager sales & customer support since 1998. This company is in the industrial gases . I am searching job in the same field. Any Cryogenic Company Interested Please call me.

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

b.e(industrial electronics),skills are worked on siemens/abb plc,ac & dc drives,troubleshooting ,hydraullic know how,pneumatic know howsiemens drive,lenze drive,ac & d motors and their controlling,worked over software like cmms,icam,matlab,autocad,orcad,software used in equipment/machineries.

Ability to perform field inspections, risk assessment, review, prepare procedure and hand.Self-development in administration and management skillsle permit to work system.Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems.

Title of qualification awarded Bachelor of Science in Physics Name and type of organisation providing education and training Universidade do Algarve, Faro, Portugal

I have 25 years experience in the Instrumentation field as Instrumentation supervisor, Instrument QA-QC Inspector and Instrumentation technician. Present I am working for (YANSAB) Yanbu National Petrochemical Company a SABIC affiliate (Kingdom of Saudi Arabia.).

Previously worked for a oil and gas brokerage firm in Houston, Tx at the end of 2008. Experience as leasing agent and experience in running title in Texas.

A Degree in Business Admin and Management, skills and experience in secretariat and Administrative duties, have worked in an Oil and Gas company, 2 Construction Companies, good mastery of Micro Soft applications, excellent in both spoken and written English, with French and an additional Language.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

Operation Manager, International Pipe Inspector by DS-1, (Level II UT, RT, MT & PT) - ASNT-TC-1A

MSc Engineering / Business Development / Project Management /Energy fielsd

Control Systems Engineer (Programmer & Designer)

i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.

Project Manager / Finance Management

22 YEARS POWER, PETROL-CHEMICAL, AND REFINERY INDUSTRY

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

10 Plus years Developing and maintaining EPC Schedules Utilizing Primavera Softwares

Driver, teacher, maintenance computer, air conditioning and electrician

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 [ 181 ] 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out