Resume - Highly knowledgeable in the principles, application, installation, start-up and ...

Misco Jobs

Resume #1242

CONTACT INFORMATION:
View contact information...

Work Experience

With THE EXPRO GROUP NORTH SEA, LTD. from November 2001 to April 2002 as an Instrument Technician involved in the installation, start-up, commissioning and maintenance of the Oil Processing Facility on board the Atwood Falcon Mobile Offshore Drilling Unit for the Extended Welltest Project for Shell Exploration Philippines BV on the Malampaya Oil Rim in Palawan, Philippines.

With WELLTECH SERVICE CORPORATION from June 1991 to October 2001. Held the following positions and responsibilities:
- Service Engineer in charge of the engineering, application, troubleshooting, repair and calibration needs of the various clients of the company.
- Service Supervisor in charge of the management of instrumentation and control services, e.g. engineering, application, troubleshooting, repair and calibration of instruments and processes provided for the various clients of the company.
- Project Supervisor in charge of the project management, e.g. installation, start-up and commissioning of contracted projects.
- Head of Projects in charge of the supervision of the project management groups of various contracted instrumentation and control projects.
- Technical Manager in charge of the supervision of project conceptualizations, detailing and estimates, including close coordination during implementation.

With the PHILIPPINE ASSOCIATED SMELTING AND REFINING CORPORATION from April 1983 to September 1987, starting as an Instrument Trainee and eventually becoming a Senior Instrument Technician with the Maintenance Department. Was in charge of the maintenance, troubleshooting and repair of various instruments of the following processes:

- ORE CONCENTRATE UNLOADING AND STORAGE
- CONCENTRATE BLENDING AND DRYING
- FLASH SMELTING AND CONVERTER FURNACE
- COPPER ANODE CASTING
- COPPER CATHODE REFINING
- PRECIOUS METAL RECOVERY
- ELECTROSTATIC PRECIPITATOR
- WASTE HEAT RECOVERY
- SULFURIC ACID PLANT
- STEAM GENERATION AND DISTRIBUTION
- WASTE WATER TREATMENT FACILITY
- OXYGEN AND NITROGEN PLANT
- WATER DEMINERALIZATION PLANT
- R&D LABORATORY

Supplemental Career Training

Instrumentation and Control Technology Fundamentals
Industrial Painting System
Corrosion Control System
First aid & CPR
Basic & Advanced Firefighting Techniques
Newsletter Production
Management Course For Plant Leadman
Basics of Selling
Project Management Course
Understanding Management Crisis in the Workplace
Basic Omron PLC Programming Course
Occupational Health & Safety Course
Helicopter Underwater Escape Training Course

Education

BACHELOR OF SCIENCE IN ELECTRONICS
AND COMMUNICATION ENGINEERING
FEATI University, Manila, 1991

DIPLOMA IN ELECTRONICS ENGINEERING TECHNOLOGY
Major in Industrial Electronics
Mindanao State University-Iligan Institute of Technology, Iligan City, 1983

SECONDARY EDUCATION
Central Mindanao Colleges, Kidapawan, Cotabato, 1980

ELEMENTARY EDUCATION
Central Mindanao Colleges, Kidapawan, Cotabato, 1976

Personal

Birth            October 14, 1963 in Ibaan, Batangas, Philippines

Married to        Ms. Mila Verceles Vilela

Religious Affiliation    Roman Catholic Church
            Couples for Christ

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2401 to 2450 of 10923)

Go to Search Parameters...

Brief Description

Over 20 years experience in the Health, Safety and Environment Field in supervision, training, auditing and implementation of Management Systems in Oil/ Gas Construction and Operations.

Corrosion Engineering consultant

Consultant Night Drilling Supervisor / Drilling Supervisor. Available for immediate employment. Minimum $650 USD per day (more for hardship/dangerous locations).

Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Electronic Engineer with over 20 years experience with specialisation in Process control analytical instrumentation. Worked in oil/gas, chemical, fertilizer, steel, Power/desalination industries.

I have total 21 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinary production supervisor, oil terminal incharege etc. I worked on various International companies.

To obtain a challenging, growth-oriented position with a reputable company that will utilize my current knowledge and skills while affording me an opportunity to developing new ones.

I have experience with several major international oil companies. I also have expertise in drilling, production, maintenance, construction, projects and operations. My experiences have been found at a local and international level.

Experienced in Contract Negotiation, Management, operations and administration at upper levels in business related to Marine Operations, Business Development, Private Business and Coordination of Marine Repair and Refurbishment projects.

I am a Mechanical engineer with 20 years experiences in design of all kinds of piping & fixed equipment design & stress analysis work. I used softwares like CODECALC, CEASER, PVELITE, partly STAAD & ALGOR. My experiences are in oil and gas, power, onshore as well as offshore.

Executive leadership and acquisition of undervalued Assets, Companies or Reserves in the mid & upstream sectors. Energetic leader in Corp. Development, Problem Solving, E & P, Pipelines, Gas Processing and MMS; start-up to multi-billion $$ companies, providing multi-million $$ accretive results.

Dynamic, results-driven Finance and Operations Executive with superior background in large-scale national and international projects/programs.. Proficient at contract negotiation, project start-up/planning and oversight, personnel management, accounting, job costing, contracts and logistics

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

The majority of my experience has been in project Director/management/ engineering and all related to the oil and gas industry offshore and onshore

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

My objective is to utilize my 25 years of experience in the oil industry, as a Drilling Consultant, for a International Oil Company.

Petroleum / Drilling Engineer: - 30 years experience as a Petroleum Engineer, with 9 years in the U.S. and 21 years international. Of this total, 22 years has been in drilling, completions and workovers, 8 years in production.

Looking for an appropriate position in an international company where I can utilize and further enhance my contracts administration/ project management skills with exposure of engineering, that I have acquired over 20 years of working in Oil Refinery/ Petrochemical Industry.

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

Clerical Jobs

HEALTH, SAFETY & ENVIRONMENT OFFICER QUALIFICATIONS 14 years of Technical Writing Experience 14 years of Safety Training 19 years of Teaching Experience 19 years of Business Continuity Experience 22 years of Experience Using & Programming Computers.

I have over 35 years experience in the operations and Management of different chemical plant processes and some refinery processes.

I have more than 20 years experience, world wide, in QA, Safety, & Welding management in manufacturing & construction environments.

Highly knowledgeable in the principles, application, installation, start-up and commissioning, troubleshooting, repair, and calibration of Process Instrumentation and Analyzer Systems.

Twenty-two years in geologic research and preparation of reports on coal and coalbed methane resources in Virginia. Experienced geologic mapper. Microsoft Programs, Earth Vision, Arcview GIS 3.2, ARC/INFO, SPSS, and Adobe PageMaker. published.

A Field Operations / Production Engineering Manager with wide experience in oil and gas production projects. Has excellent skills in production technology / artificial lift / potential EOR screening / scheduling and management of oil and gas upstream & downstream engineering projects.

Extensive experience as a project engineer, piping engineer, engineering manager and project manager for design and construction of gas plants, refineries, cogeneration plants, LNG plants, cross-country pipelines, LPG storage and loading facilities.

Worked on many projects internationally in the Electrical and Instrumentation fields as Technician, Supervisor and Superintendent.

PROFESSIONAL SUMMARY Over 20 years of proven expertise in direct oil and gas operations. An experienced trouble-shooter and problem solver.

Petroleum engineer with 25 years of energy industry experience. Strong quantitative and analytical skills. Experience includes acquisitions, management, reservoir analysis, economic evaluations, exploration, production and natural gas pipelines. Prefer to stay in Dallas-Fort Worth area or Houston.

I am seeking an exploration or a trend development geologist position where I can find reserves for a company by generating well documented low risk prospects and add significant value by identification of additional opportunities on existing acreage.

Objective—Materials or Manufacturing management in an aggressive organization seeking to become best in their trade through intelligent use of systems and processes.

Extensive experience in the Gulf Coast and Gulf of Mexico in all phases of drilling, completion, remedial & production operations.

Internationally oriented. Experience in Oil & Gas, Mining, Engineering, Construction, Computer Manufacturing.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

Summary: I have extensive knowledge in: Cost Analysis, Scheduling, Management, Negotiations, Proposals/RFI/RFQ, Team Leadership, Supervisor, Project Lead, Workshop Development, Document Control, Technical Lead, Technical Writer/Proposal/Reports Writer, Training

To become associated with an integrated international oil and gas company in a managerial or senior staff position in Exploration and/or Operations Geology.

Mechanical process engineer with design, engineering, and operations experience in power, oil and gas and petrochemical.

Twenty-two years experience in production, reservoir and evaluation engineering of both major and independent oil companies. Areas of experience include Rocky Mountain, Mid-continent, West Texas, Gulf Coast, Argentina, and Venezuela.

I am a Chartered Accountant and Company Secretary from India, aged 41.

Managed and implemented product, equipment, and process design/modifications in manufacturing. Developed and managed concurrent design engineering initiatives, proto-typing, product development/validation (NPI), manufacturability, preparation of specifications and operational documents.

Public Affairs, Public Relations, Training, Cross Cultural emphasis. Managerial, Technical, Supervisor, Trouble-shooting and Training expertise in Oil/Gas production operations, one offshore. Proficient Macintosh/IBM PC comp. International work. Cross-cultural training, work and personal exp.

I am a Mechanical Engineer with extensive experience in project management, terminal facilities, pipeline design, construction, operations, maintenance and onshore/offshore equipment specifications.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [ 49 ] 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out