Resume - I have more than 20 years experience, world wide, in QA, Safety, & Welding manag...

Misco Jobs

Resume #1251

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To obtain a full time position in QA /QC, Safety, or Welding Management

SUMMARY OF EXPERIENCE

I have acquired more than twenty years professional comprehensive “hands-on & in the field” experience in successfully performing increasingly responsible quality assurance, welding and metallurgical, & HSE safety engineering endeavours in manufacturing and construction environments. This includes 3rd party inspection and surveillance, and the training and lecturing on many of the applicable subjects. These endeavours are performed on an international basis.

¨Dept. of Defence tactical & armoured vehicle projects
¨Heavy construction track & wheeled vehicle manufacturing
¨Heavy structural steel welding & fabrication
¨Major offshore deep water (4,000 ft +) petroleum development projects
¨Major onshore & offshore pipelines (tropical & artic)
¨Offshore drilling ship equipment & fabrication
¨Land base drilling rig equipment & fabrication
¨Down hole oil tool machining, welding, & heat treating
¨Onshore / offshore drilling equipment, fabrication, welding, & installation
¨ASME pressure vessels
¨Alaska North Slope & Kenai Peninsula experience
¨Major onshore petrochemical projects (tropical & artic)
¨Gas compression equipment manufacturing

Personally involved in the initial design and material selection of many of the above-mentioned projects. All of these projects involved extensive vendor capability evaluation and audit, as well as fabrication, QA/QC, Specifications, and NDE documentation audit and review. Instrumental in qualifying the BP-GTL Project at Nikiski, AK. for ISO-14001 certification. Proficient in the development, writing, and implementation of QA/QC functions following ISO-9000, API – Q1, AWS D1.1, ASME, and other engineering guidelines. Develop and implement applicable NDE specifications and procedures for different welding, coatings, and radiographic circumstances. Specification and report writing are an integral part of the technical and management requirements in my particular environment of proposal development, project planning, new facility lay-out/start-up, vendor and client liaison, material selection, and technical training & supervision. Served as the tactical vehicle Test Administrator for the U. S. Army FMTV Project (17 variants of 2-1/2 & 5 ton truck configurations) undergoing reliability testing at 5 test facilities in the U. S. A. This endeavor required extensive database and spread sheet analysis.
Developed under water “Wet & Dry hyperbaric habitat” welding procedures for Brown & Root, Inc. Worked for the Brown & Root, Inc. Corporate technical support group in Houston, TX that supported 12 major pipeline and deep-water petroleum projects worldwide.

SAFETY Training
¨40 hour North Slope Training Coop. (Safety) – May 2001 (Cert. # PBU-62898)
¨8 hour Radiation Safety Training – May 2001
¨DuPont’s – (STOP) Safety Training Observation Program
¨STOP Refresher Course - Jan. 2002
¨Site Work Permit Training - Jan. 2002
¨HSE Incident Investigation Training - Jan. 2002

¨BP-Alaska - GTL Project: Safety Coordinator for the HSE Manager - 2001
    1. Presented the 4 hour Site Specific Safety Orientation - 2001
    2. BP Advanced Safety Audit Training - 2001
¨ASCG-Alaska: Certified Crane Inspector by Managed Integrity Services, Inc.
1.    Present & teach “Crane Safety Inspection” classes.
¨North Slope Drilling Rig Safety oriented
¨4 - hour Alaska drivers safety training orientation
¨More than 8 years training in Law Enforcement, Accident Investigation, First Aid, CPR – Texas Dept. of ¨Public Safety – Austin, TX, Ransom Canyon , TX – Deputy Marshal
¨Volunteer Fireman – 10 years Ransom Canyon, TX

ACTIVITIES                        PROJECTS

Welding Engineering & Metallurgy            Eagle Picher
HSE Safety, Inspection, Training, & Management    Stewart & Stevenson – FMTV Project
Program/Project Expediting                Exxon “Diana” Platform - Gulf of Mexico
Field QA/QC Management                All American Pipeline Project (1,760 miles)
Vendor liaison, audit, & surveillance            Oceaneering International, Inc.
Manufacturing facility maintenance Mgmt.        Pemex – Bay of Campeche offshore
Production line design                Bolivia pipeline project, Brazil
Consulting & trouble shooting                Petrobas – Urucu Basin, Brazil
Manufacturing cost reduction                CBI Trans Pacific Indotama Marine Project
Blue print checking & approval            Shell Malampaya Project
Eng. Document control                Chevron Angola Project
Specification & procedure writing            Extensive Procurement Involvement
Engineering Liaison                    BP Alaska – (GTL) Gas to Liquids Project
Material selection                    BP Alaska – North Star (Prudhoe Bay)
Failure analysis                    Shell Western E & P – WAG Projects
Certified Crane Inspection                Amoco Mallet I & II Project


EDUCATION and RELATED ACTIVITIES

BS, Chemistry – Tarleton State University
CQE – Certified Quality Engineer, Amarillo College
2 years - Welding & Metallurgy Technology, Texas A & M
ASNT Level II tested & certified in Radiography Interpretation & Visual Inspection
Appointed Level III in Radiography

Many specialized technical courses & seminars in NDE methods, welding & welding metallurgy, materials selection, safety, industrial engineering, & manufacturing.
I have developed, written & copyrighted a “hands-on” seminar along with a 60-page study guide, slides, weldments, & radiographs. The seminar is titled Introduction to Radiographic Interpretation. This seminar can be adapted to different welding processes and codes.
Computer literate – I own a pc with 800 MHz, 30 gig hard drive, 128 Megs RAM, etc. Familiar with Microsoft software, CAD, database, spread sheet, internet, e-mail, & etc.
Familiar with WELD PROWRITE, WELDATA, APV, AWS D1.1-2000, & other engineering software.
Tom Hopkins – 5-day sales course
Dale Carnegie - Sales course

Past Credentials
U. S. DOT & Texas RRC: Guest Lecturer on the subjects of Pipeline Safety, Industrial Radiographic Interpretation, and Welding Technology
Levelland College – Levelland, Texas: Served on the Technical Board of Advisors –Welding Technology

I have an in depth historical resume if required.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 10106)

Go to Search Parameters...

Brief Description

Pipeline Engineer having 8 years experience in detailed and construction engineering of submarine pipelines

Preparing FEED deliverables: Process Flow diagrams, P & IDs, heat & material balance table, process equipment data sheets Generation: heat exchangers, pumps, air fin fans, instrument data sheets, Control valve Sizing calculation,

Environmental Professional with 10 years experience is looking for a managing position in Oil&Gas industry. Work experience includes providing services for Exxon, BP, Totalfina Elf, Agip, Chevron etc

As a Wellsite Geologist with over 13 years of experience I have worked on various Oil/Gas and Coal Bed Methane exploration & development projects (400+ wells) in Canada as well as International work in the country of Qatar.

I am Chemical engineer backed by MBA with 15 years of proven track record in the field of marketing & sales of specialty chemicals to wide range of industries. I have worked for & trained with some of the largest multinational chemical companies.

refinery equipment mechanical design

prepare piping layout, isometrics, MTO, CADD. review and check piping layout prepare by piping designers. do site and drafting supervision. worked as PMT on some projects.

Numerous Industry Courses in Geology, logging, computer, Geochemistry, Petroleum Economics and Reservoirs … etc. Can Work Under Tension and Take Decision In Right Time. Having Interpersonnal Skills Can Solve Problems With Other Departements

Senior Mechanic who does repair and replace of light and heavy equipment

Senior Control Systems Engineer (PLC/SCADA), technically responsible for all software and hardware modifications, design review leader, functional safety assessor, HNC instrumentation & control.

20 years oilfield experience. Day and Night Drilling Supervisor, Rig manager, OIM. Sub sea, Surface and land drilling knowledge. Proven safety record, Operations & man management skills. I have good background in drilling, work-overs and completions, Surface & Subsea.

I have oilwell service experience with wireline, swabb have ing, fishing and rental tools. I24 years experience with manufacturing and machine work on oilfield equipment. I am an hands on hard working man with good hand eye coordination that likes the challange of working on oilwells.

All aspects of seismic data processing - signal processing, velocity modeling, migration

Construction Manager

Technical / Lead Safety Engineer

Currently working with Kuwait Oil Company working on Integrity Management with BP consultant. Advance Safety Audits in various GC’s, Booster Stations, Insurance recommendations, QRA recommendations, HSEMS implementation and Audits.

Maintenance / Relaibility / Rotating Equipment Planning Engineer - Suitable Position

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

I have more than 27 years of petrochemical experience in a very wide field, including Methane Reforming, Air Separartion, LNG Storage, Tank Farm and Despatch (pipe line, rail, road and ship), Process design and Utilities (water treatment). Also extensive construction and commissioning experience.

Over 20 years experience in the Health, Safety and Environment Field in supervision, training, auditing and implementation of Management Systems in Oil/ Gas Construction and Operations.

Corrosion Engineering consultant

Consultant Night Drilling Supervisor / Drilling Supervisor. Available for immediate employment. Minimum $650 USD per day (more for hardship/dangerous locations).

Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Electronic Engineer with over 20 years experience with specialisation in Process control analytical instrumentation. Worked in oil/gas, chemical, fertilizer, steel, Power/desalination industries.

I have total 21 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinary production supervisor, oil terminal incharege etc. I worked on various International companies.

To obtain a challenging, growth-oriented position with a reputable company that will utilize my current knowledge and skills while affording me an opportunity to developing new ones.

I have experience with several major international oil companies. I also have expertise in drilling, production, maintenance, construction, projects and operations. My experiences have been found at a local and international level.

Experienced in Contract Negotiation, Management, operations and administration at upper levels in business related to Marine Operations, Business Development, Private Business and Coordination of Marine Repair and Refurbishment projects.

I am a Mechanical engineer with 20 years experiences in design of all kinds of piping & fixed equipment design & stress analysis work. I used softwares like CODECALC, CEASER, PVELITE, partly STAAD & ALGOR. My experiences are in oil and gas, power, onshore as well as offshore.

Executive leadership and acquisition of undervalued Assets, Companies or Reserves in the mid & upstream sectors. Energetic leader in Corp. Development, Problem Solving, E & P, Pipelines, Gas Processing and MMS; start-up to multi-billion $$ companies, providing multi-million $$ accretive results.

Dynamic, results-driven Finance and Operations Executive with superior background in large-scale national and international projects/programs.. Proficient at contract negotiation, project start-up/planning and oversight, personnel management, accounting, job costing, contracts and logistics

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

The majority of my experience has been in project Director/management/ engineering and all related to the oil and gas industry offshore and onshore

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

My objective is to utilize my 25 years of experience in the oil industry, as a Drilling Consultant, for a International Oil Company.

Petroleum / Drilling Engineer: - 30 years experience as a Petroleum Engineer, with 9 years in the U.S. and 21 years international. Of this total, 22 years has been in drilling, completions and workovers, 8 years in production.

Looking for an appropriate position in an international company where I can utilize and further enhance my contracts administration/ project management skills with exposure of engineering, that I have acquired over 20 years of working in Oil Refinery/ Petrochemical Industry.

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

Clerical Jobs

HEALTH, SAFETY & ENVIRONMENT OFFICER QUALIFICATIONS 14 years of Technical Writing Experience 14 years of Safety Training 19 years of Teaching Experience 19 years of Business Continuity Experience 22 years of Experience Using & Programming Computers.

I have over 35 years experience in the operations and Management of different chemical plant processes and some refinery processes.

I have more than 20 years experience, world wide, in QA, Safety, & Welding management in manufacturing & construction environments.

Highly knowledgeable in the principles, application, installation, start-up and commissioning, troubleshooting, repair, and calibration of Process Instrumentation and Analyzer Systems.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out