CONTACT INFORMATION:
View contact information...
EDUCATION
1981 - 1987: Chemical Technology, Technical Univ. of Eindhoven, The Netherlands.
Graduation subject: Mass transfer in slurry-reactors in the Fischer-Tropsch synthesis.
Mobility: single - international mobile
Availability: 2 weeks notice
EXPERIENCE
2006 Aug - FluorDaniel, Bergen op Zoom, The Netherlands
Process engineer, in charge of:
- Basic and detailed engineering of Scippy2 polyols project, Shell Pernis, Netherlands.
Activities: Area classification, hydraulic check cooling water, HAZOP, P&ID preparation, line list, instrument data sheets, equipment data sheets, relief valve calculations.
2004 – 2006jul Jacobs Engineering, Antwerp, Belgium
Process engineer, in charge of:
- Modifications at PE plant feeding section, Total Petrochemicals Antwerp, Belgium.
Activities: Risk assessment, HAZOP, PID update, linelist, C&E diagram.
- Modifications at Naphtha Cracker 2, Fina Antwerp Olefins, Belgium.
Activities: HAZOP, PID update, linelist, flare study.
- Flare study of Naphtha Cracker 3, Total Refinery Antwerp, Belgium.
2004 IV Oil and Gas, Papendrecht, The Netherlands
Process engineer, participated in:
- Proposal for Condensate stabilizer unit, Sirte Oil Company, Libya.
Activities: calculate influence of water on condensate RVP; calculate flaring scenarios.
- Proposal for Volve development Process and Utility Module, Statoil, Norway
Activities: preparation of PFD's, heat & material balance, equipment specification;
calculate utility consumption
- Detailed engineering of K1A modifications: installation of new flowline & chemical tank, Total E&P, Netherlands.
Activities: update of P&ID's, linelist, linesizing, process report, HAZOP.
- Detailed engineering of Wintershall F-16 gas production platform, Northsea.
Activities: calculation of fire water pump, calculation of control valves, relief valves, flare and blowdown report.
2003 Jacobs Engineering, Leiden, Netherlands
Process engineer, participated in Instrument revamp project L7 facilities (basic engineering), Total E&P, Netherlands
Activities: update of PID's, ESD logic diagrams.
2003 Jacobs Engineering, Godorf, Germany
Harbour revamp project (detailed engineering), Shell Godorf refinery, Germany
Activities: preparation of PFD's, PID's.
2002 Shell Global Solutions, The Hague, Netherlands
Process engineer in Energise department.
Activities:
- Write Field manual: describe and calculate energy savings for plant air systems, air coolers, compressors, amine units.
- Berre refinery, France: participate in energy savings assessment
2001 – 2002 PTTEP, Bangkok, Thailand
Process engineer for Bongkot production facilities: Gas production platform in Gulf of Thailand, capacity of condensate 16,000 bpd and gas 650 mmscfd.
Activities:
- Site visits to troubleshoot operational problems of fuel gas and glycol units in conjunction with production team, responsible for follow-up.
- Perform and follow-up studies to optimise production process.
- Initiate and design of modifications; update datasheets and PID's.
- Initiate production tests for glycol systems, responsible for follow-up.
- Participate in HAZOP/technical review/startup of new Sour Production Platform.
2001 IV Oil and Gas, Papendrecht, The Netherlands
Process engineer of Dan FF water injection project (detailed engineering), Maersk O & G, Denmark.
Activities:
- Preparation of PID's.
- Preparation of safe charts.
- Fire water network hydraulic check.
- Preparation of control valve, relief valve and flow orifice datasheets.
1999-2000 VICO Indonesia, Muara Badak, Kalimantan, Indonesia
- Process and safety specialist; testing 130 production operators (oil and gas) for skills and knowledge. Tests are based on Standard Operating Procedures.
1998 – 1999 Stork Engineers, Amsterdam, The Netherlands
- Process engineer, participated in:
- Dukhan gaslift project (basic engineering), QGPC, Qatar
Activities: Preparation of PID's hot oil system.
- Control valve loop hydraulic calculation.
- DOW elastomer project (detailed engineering of SBR and BR plant), Schkopau, Germany.
Activities: preparation of PFD's and mass balance.
- VEBA F2a Hanze Field development project (production & storage platform), Northsea,
Netherlands.
1994 – 1998 Total Indonesie, Balikpapan, Indonesia
Production process engineer responsible for Handil site: Oil production platform in swamp area (Mahakam delta), capacity of oil 20,000 bpd and gas 160 mmscfd.
Activities:
- Site visits to troubleshoot operational problems in conjunction with Production team, responsible for follow-up. Examples: platform overall blowdown, gathering network MAWP, instrument gas quality.
- Perform studies for process optimization (e.g. related to declining wellhead pressure);
responsible for follow-up.
- Initiate and design of modifications; update datasheets and PID's.
- Initiate production tests, responsible for follow-up.
- Participate in HAZOP/technical review/startup of new installations: EOR gas injection compression and LEX (Liquid Extraction) multi-type heat exchanger.
- Write operating manuals, startup/operating/shutdown procedures
1993 Ceria-Worley, Jakarta, Indonesia
Project engineer for detailed engineering EPC-24 project, Tunu Field, Total Indonesie: Total Indonesie: 2 GTS platforms, capacity 200 MMscfd each. In charge of engineering projectteam (15 p), responsible for project planning and -budget, coordination with construction projectteam.
1991 – 1992 Sofresid, Jakarta, Indonesia
Process engineer, participated in:
Basic engineering of waterflood project, Echo Field, ARCO Indonesia.
Activities:
- Preparation of PID's, PFD's and safe charts
- Preparation of pig trap datasheets
- Line sizing / hydraulic calculations
- Preparation of control and safety valve datasheets.
Basic engineering of Soroosh Field, I.O.O.C., Iran (done in Paris).
Detailed engineering of EPC-3 project (pipelines, manifold- and scraper trap platform), Tunu Field, Total Indonesie.
Activities:
- Preparation of PID's / PFD's
- Preparation of all process, mechanical and safety engineering datasheets
- Preparation of precommissioning dossier and engineering manual
Detailed engineering of EPC-1 project (gas processing/treatment platform, capacity 800 mmscfd), Tunu Field, Total Indonesie.
Activities:
- Preparation of PID's, ESD and F&G logic diagrams
- Fire water network hydraulic calculation
- Preparation of hazardous area and safety equipment layout.
1989 - 1991 ABB Lummus Crest, Voorburg, The Netherlands
Process Engineer, participated in process design for the petroleum and chemical industry:
Detailed engineering of Melamine plant, DSM Geleen, The Netherlands.
Capacity 30,000 ton/year.
Activities:
- Preparation of PID's, line schedules, hydrostatic test diagrams, pressure loss calculation of critical piping.
- Hydraulic check of flare system including flare header line sizing.
Basic engineering of a high-density polyethylene plant, DSM Geleen, Netherlands.
Activities:
- Study of waste gas incineration system
- Fire and explosion risk analysis
- Preparation of steam balance
Revamp of Petrogal Refinery, Sines, Portugal. Capacity: 10 million tons crude/year.
Activities:
- Feasibility study of crude distillation unit:
- Computer simulations of crude column and all connected heat exchangers and pumps.
- Computer design of new valve trays.
- Preparation of new overall refinery mass balance.
- Detailed engineering off-sites.
1987 - 1989 Heineken Brewery, Zoeterwoude, The Netherlands.
Process engineer in Process Technology Department; responsible for development of new beers and new beer processes on pilot-plant scale.
Activities:
- Development of alcohol free beer.
- Improvements in beer filtration and stabilisation.
- Statistical analysis of pilot brewery results.
LANGUAGES
English Fluent
French Average
German Good
Indonesian Fluent
REFERENCES:
Available upon request
View contact information... |