Resume - I have worked extensively with various simulation packages viz. MoReS, Eclipse, ...

Misco Jobs

Resume #12832

CONTACT INFORMATION:
View contact information...

Membership of Professional Societies: Society of Petroleum Engineers (SPE), Society of Petroleum Well Log Analysts (SPWLA), Aberdeen Formation Evaluation Society (AFES)

Key Qualifications:

* More than 8 years experience in conventional and advanced Reservoir
Engineering/Petroleum Engineering.
* Currently doing a part-time research in the field of Petroleum Engineering/ Geomechanics. Topic: Real Time Evaluation of Sanding Potential. Major interest is in coupling reservoir simulation and geomechanical models to give more realistic reserves estimates and production profiles viz. compaction effects due to production-induced reservoir depletion
* Proficient in various completion methods; critically examining the need for sand face completions.
* Proven track record as a subsurface/field development co-ordinator
* Specialist in technical and economic screening of brown field development projects
* Extensive experience in reserves estimation and production forecasting
* Extensive experience in well test design and analysis (including wireline formation testing)
* Experience in modelling various Niger-delta & North Sea reservoirs. Experienced in using various reservoir simulators like MoReS, Eclipse, VIP, MORE.
* Experience in carrying out Formation evaluations via PVT & Petrophysical logs.
* Had a three year stint as an Information Technology Professional, post graduation. I was involved in programming, network management and routine PC maintenance. Possess the ability to write programs in UNIX, Visual Basic and C++.
* I possess the United Kingdom's 'Highly Skilled Migrant Program' work permit. This work permit is given to individuals who have demonstrated sufficient skills for gainful employment in the United Kingdom. It is independent of any particular employer.

Education:

2002-Date; Currently pursuing an Mphil/PhD degree Oil & Gas (Geomechanics), Robert Gordon University, Aberdeen, Scotland, United Kingdom on a part-time basis. Topic: 'Real Time Evaluation of Sanding Potential'.

1989-1994; B.Sc. Mathematics (with Computer Science), University of Port Harcourt, Rivers state, Nigeria.

1983-1989; Secondary School Certificate (SSCE), Federal Government College, Lagos, Nigeria

1982-1983; First School Leaving Certificate, Randle Avenue Primary School, Lagos, Nigeria

Employment Record:

2002 - Date; Reservoir Engineer, Shell Exploration & Production, SepTAR UK, Aberdeen, Scotland, United Kingdom.
Duties and responsibilities are classical reservoir engineering works. Activities mainly centred around construction, history matching, and general maintenance of 3D simulation models. The fields of responsibility include Otumara, Saghara, Escravos Beach, Opuama, Afremo, Gbetiokun and a few Partially Appraised / Un-appraised Discoveries (PAF/UAD). Currently took up responsibilities for the Santa Barbara field. I was the leading RE for the Pecten Cameroon Bakingili field prospect review. This was a field jointly owned by Shell and Total.

Other activities/ skills I possess include:

* Well Test Interpretation
* Reservoir Volumetric Calculations
* Well Inflow Performance Evaluation
* BHP Design
* Material Balance studies
* PVT Sampling and analysis
* Streamline Simulations
* Field/Reservoir Surveillance
* Production optimisation and Infill evaluations
* Identifying uncertainties in the production forecast, and formulating a strategy to manage these (appraisal, scope maturation plan)
* Driving and co-ordinating data gathering programs (fluid samples, well and interference tests, core analyses, 4Dseismic etc) on the basis of value of information (VOI).
* Making decisions on data acquisition, well test duration, tolerances for well targets, a fast track versus a phased development, or any other activity related to my task.
* Balancing technical correctness and economic interest.
* Creating business opportunity, understanding risk management, and ability to keep the output of one's models in their proper context.
* Clear understanding of the ins and outs of production allocation and production reconciliation procedures
* Understanding the physics of displacement processes
* Commercial and political skills
* Project management skills
* Multi-field development optimisation
* Up-scaling
* Modelling of complex well configurations
* Complex PVT analysis
* Insight and understanding of the more exotic recovery processes

1996 - 2002; Reservoir Engineer, The Shell Petroleum Company of Nigeria.
Responsible for the evaluation and development of both primary infill drilling campaign and secondary recovery projects for the Otumara, Saghara. Escravos Beach fields. Activities include:

* Browning portfolio of assets: the increased need to understand, describe, evaluate and apply enhanced recovery mechanism adds another level of complexity.
* Basic log interpretation
* Reservoir Performance Prediction (Forecast)
* Reservoir Simulation / History matching
* Well test Interpretation
* Fluid sampling and fluid description
* Well deliverability Analysis
* Material Balance Studies
* Decline Analysis using material balance time type curves
* Development Planning and Economic analysis
* Uncertainty and risk assessment in all stages of field development. Both the quantification of the bands of uncertainty and the quantifications of their economic impact
* Adequate assessment of the VOI in the context of data gathering, appraisal strategies and flexible or phased developments
* Software Development using both Visual Basic and Fortran

1995 - 1996; Information Technology Professional, Ecobank Nigeria Plc. Lagos, Nigeria.
Responsible for a variety of routine information system works associated with the installation of computers, updating and checking hardware, systems software, and computer programs. Activities include:
* Administration of UNIX
* Cobol Programming
* Relational Database Technology
* C++ Programming
* Local Area Network Administration on Novell Netware 4.0
* PC routine maintenance and trouble shooting
* Installation of Various Software Packages
* Installation and Maintenance of the "GLOBUS" Banking Software on IBM RS6000 Machines

June 1995 – August 1995; Data Analyst, Nigeria Agip Oil Company Ltd. Lagos, Nigeria.
Duties mainly concentrated on development of database using dbase. Responsible for all various data analysis, such as data validation and formatting, and carrying out steps to ensure integrity of data. Other activities include:

* Developed software for handling the housing policy for the company. It involved paying lump sums periodically to staff.
* Versatile in COBOL programming.
* PC routine maintenance and trouble shooting.
* Preparing raw data for uploading unto the database.
* Database management and data reporting.

Training Record:

September 2004/4 days: SPE Annual Technical Conference & Exhibition 2004

July 2004/1 week: Well Test Design and Analysis, London.

September 2003/1 week: Production Geology for other disciplines, Netherlands

June 2003/1 week - Petrophysics for other Disciplines, London

December 2002/4 years- Development Assignment as a Reservoir Engineer to Shell Septar UK, Aberdeen.

May 2002/ 1 week- Gas Reservoir Management, Imperial College, London.

May 2000 2 weeks- MoReS Simulation Course, Port Harcourt, Nigeria.

September 2001/ 2 weeks- MoReS Simulation Course, Oman.

January 2001/ 2 days- Production Geochemistry Course, Nigeria

December 2000/ 2 weeks- Reservoir Engineering Course, Netherlands.

May 2000/ 2 days- Hydrocarbon Field Planning Tool, Nigeria.

June 1999/ 2 weeks- Shell Life Modules I & II (Leadership Course), Netherlands.

April 1999/1 week- Eclipse Simulation Course. Warri, Nigeria

February 1998/ 5 weeks- Subsurface Development and Operations, Netherlands.

June 1997/ 6 weeks- Introduction to Exploration and Production, Nigeria.

Professional Experience:

- Used Fastrack (Volumetrics package) to evaluate the volumes ranges in the Bakingili field (JV between Shell & Total) in Cameroon. Quantified and reported the Scope and Reserves volumes and the uncertainties associated within those volumes.

- Currently the principal Reservoir Engineer for the Santa Barbara study going on in Shell EPT-S Aberdeen. Drafted the work schedule and CTR (cost time resources) sheet to the partners (SPDC). Participated in the project framing for the study.
- Executed a quick study to investigate the possibilities of communication between Santa Barbara and the nearby Chevron field (Robertkiri) in the aquifer. A classical approach was deployed by looking at all RFTs, BHPs, fluid contacts movements and PVT properties.

- Experienced in using PetroVR (Caesar Systems Package) to do quick economic evaluation of development scenarios. Was able to screen out uneconomic development scenarios during the 'First Pass Asset Review'(FPAR)

- Quality checked and analysed the PVT samples existing in the Santa Barbara field (Shell Nigeria). A total of 15 PVT samples exist in this field. Rounded the study with a report titled 'Santa Barbara PVT Validation Exercise Report'. This formed the basis of the reservoir simulation studies that subsequently followed.

- Developed simple Buckley-Leverett, Dietz and a tool for evaluating water injection effects on reservoirs, using excel spreadsheets

- Carried out a quick PVT analysis of 15 samples in the Santa Barbara field, by using Buckley diagrams for initial validation and Libra for analysis.

- Capable of uploading PETREL (new geological modelling package) files into MoReS

- (1) Otumara D6800 /7000 MoReS simulation model (updated SPDC model of a reservoir complex, 5 producers), (2) Otumara C1000 MoReS simulation model (important reservoir of 164 MMstb STOIIP, 14 producing wells, several static modifications required to obtain match), (3) Escravos Beach C1000/C2000 MoReS simulation model (important reservoir of 163 MMstb STOIIP, 8 producing wells, several static modifications required to obtain match), (4) integrated oil and gas- forecasting for different surface facility options, (5) static in-place volume and reserves estimation (PROTEUS), (6) decline-curve analysis versus DUR. Developed an understanding of the dynamic reservoir performance for possible development options and identified the key influencing reservoir parameters and hence the potential and risks associated with the development options.

- Used the 3DATW™ process of focused decision making and the application of project economics in preparing business decisions (OTUMiser®, Economic Work Bench)

- Took the Otumara AGG Node Integrated Oil & Gas Project Study through C2V, V2V and VAR2. Made numerous presentations, as the responsible Reservoir Engineer, on the forecast of possible development options to SPDC Management Team.

- Set up simulation models, as part of a volume-to-value (V2V) exercise for three reservoirs in the Otumara Field in SHELL Nigeria. Ran models to determine optimum field development plan. Compared the production performance of vertical and horizontal wells. Predicted the reservoir performance for various development scenarios and formulated field development, which allowed the maximisation of the cycle value of the asset, taking into account all relevant technical and contractual boundary condition (wells, surface facilities, HSE, contracts, etc.). Presented results to the SHELL Management teams. This formed the basis of the FDP that was carried out in this field in 2001- 2002. Twelve in-fill wells were drilled, coupled with some gas lift installation, re-completions and re-perforations.

- Evaluated reserves of the Otumara and Saghara fields in Shell Nigeria. Used a Monte Carlo Based program (PROTEUS) to generate probabilistic estimates. These reserves figures were subsequently challenged at managerial meetings, after which approval for booking was given.

- Conducted material balance studies of several reservoirs in the Otumara, Saghara and Warri River fields in SHELL Nigeria using HYDRA software. Determined oil in place for different reservoir layers under various gas cap and aquifer assumptions. Finalised by writing the study reports.

- Performed well test analysis for several wells in the Otumara and Saghara fields in SHELL Nigeria using Pan System software.

- Provided reservoir engineering support for the determination of Shell Nigeria's equity in the Ojumole field- a unitized field with ChevronTexaco.

- Participated in various reservoir engineering tasks including PVT sampling and analysis, prospect evaluation (Otumara, Saghara and Escravos Beach exploration wells in SHELL Nigeria), reserves reporting, oil and gas forecasting, well site engineer and joint venture activities.

Software Familiarization

Software Proficiency
MoReS Expert
PVTsim Expert
ECLIPSE User
VIP User
Dynamo Expert
Hydra Expert
FE Forecast Expert
Microsoft Office Expert
PEEP – Economic Tool User
Oil Field Manager Expert
MBAL Expert
Libra Expert
PETREL User
Pansytem Expert
MoreSyn User
Fastrack Expert
Proteus Expert
Visual Basic Programming Expert
UNIX Programming Expert

Languages:

Level
English Fluent
Yoruba Fluent

Publications:

- Santa Barbara PVT Validation Exercise Report

- First Pass Economic Analysis of the Santa Barbara field (SPDC)

- Production Forecasts and Lift Gas Requirements for the Otumara Integrated Oil & Gas Project

- Otumara Node Feasibility study

- Otumara C1.000 Sand Simulation Study Report

- Material Balance Study of the Otumara C1.000 Sand

- Various Well Planning Requests, Well Proposals & End of Well Reports

- Developed Ultimate Study Reports of Various Fields.

- Distributed Database Systems – A Case Study of The University of Port Harcourt Teaching Hospital.

- Otumara Integrated Oil and Gas Study Report – Final report

- OTUMiser vs. FE Forecast – the way forward

References:

Will be provided.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3051 to 3100 of 9785)

Go to Search Parameters...

Brief Description

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

QA/QC Architectural Supervisor/Inspector

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

I am Civil/Structure Engineer with almost 10 years experience in oil&gas, petrochemical, cement, powerplant and mining industries.

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I have worked extensively with various simulation packages viz. MoReS, Eclipse, VIP, MORE etc, I have over 8 years experience as a Petroleum Engineer, specializing in reservoir engineering.

QHSE-Advisor on crews worldwide, Extensive knowledge of Uphole Drilling programs

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Free PC user. Competative, acurate, punctual

Material Controller, 2yrs Petrolum/Oil Oman Exp and 6ys India Exp,

I am working as a QA/QC Engineer in Oman.I am expecting a challenging job to prove my potential.

I am working as Directional driller in Mitchell Drilling India Pty Ltd, India. Currently working on Multibranch holes. Till now planned 20 Multibranch holes and hit the target as planned. Have worked in horizontal wells in CBM and got the idea of horizontal well drilling and ER wells.

Bachelors and Master's in Geophysics with almost 3 years in Oil & Gas Industry

Wellsite Geologist – Operation Geologist, geology department representative at rig site for drilling activity of: development, delineation, and exploration wells with over pressure risk. Familiar with deltaic system, mainly in gas field.

I am a petrochemical engineer with over 25 years of operation and technical service experience in ethylene plants.

Six years experience in Project Controls and Project/Programme Management (including three years experience in EPC/PMC projects). Focused mainly on planning & scheduling & project risk management.

IT leader with solid accomplishments working for global industries for the last 20 years. Value delivered in Brazil, Argentina, United States, Canada, Uruguay, Puerto Rico, Colombia and Germany. Focus on IT ROI, management, planning and operational excellence.

MBA Project Manager experienced in managing both infrastructure and application development projects.

Supply Chain Management & Well Optimization Coordinator

Cathodic protection engineer with 7 years exp. with every aspect of C.P,Well versed with NACE and other Interntional and Industry specific stds

Computer knowledge, documentation, teaching, research works and quick learner.

Pipeline engineer and Stress analyst (CAESAR II)

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Worked as Rotating Equipment Engineer for various types of rotating equipments for refineries, petrochemical and nickel-mining plants in compliance with the project specifications, clients’ requirements and international codes and standards. Field engineering works during construction stage related

I am Junior Piping Designer with PDMS skill

Hse speciality

I am 32 years old, male, married, a university graduated on Offshore Engineering Dept. of ITS (Sepuluh Nopember institute of Technology) Surabaya. I have been working at some Batam shipyards since 2001. Presently, I am working as Project/Piping Engineer. Additionally, I’ve some computer skills.

MS Degree drilling engineer with 4 years of experience in oil and gas industry. A motivated person with good team work skills and experience in multi-national projects and environment. Looking for position of Night Drilling Supervisor or Wellsite Drilling Engineer on/off

Certified Drilling Fluids Engineer with extensive knowledge of oil field operations and experience working with oil wells, and well maintenance

Ngondi Bessala is a Senior geologist with more than 20 years experience as Exploration Geologist, Operations geologist and wellsite geologist with major companies Elf then Total, Conoco Phillips as consultant, with independants Perenco, Maurel & Prom, Addax Petroleum and CMS energy

Diploma in Chemical Engineering

BE in Mechanical Engr

Mechanical engineer, autocad, offpipe, microsoft

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc

As A Production Optr Carried Out: DCS [Yokogawa 1000 & CS300, Emerson] Oil Production & Processing, Gas Processing (De-Hydration, Sweetning etc), H.P & Waste Gas Compressors, Wellhead Operations [Well Testing, HY Panel Operations, SCSSSV Function Test, Well Activation] Completion, Workover, W/L

Civil engineer with 17 years experience

Skilled Production Technician

Technical Sales manager - Electrical Engineering

First Prev 51 52 53 54 55 56 57 58 59 60 61 [ 62 ] 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out