Resume - Power Plant Operator Gas Turbine Steam Turbine Supervior Operations GE HRSG

Misco Jobs

Resume #13089

CONTACT INFORMATION:
View contact information...

POWER PLANT CONTROL ROOM OPERATOR

PROFILE
Nineteen years in the power plant and steam generation field including fifteen years with Independent Power Producers and four years related service in the Navy.
Currently hold Supervisory title of Lead Control Room Operator using leadership skills to effectively maintain operational readiness and reporting directly to Operations Manager and indirectly to the Plant Manager.

Promote and ensure Plant Safety
Applicable Environmental Laws
Equipment and Operational Logs
Maintain Generation Commitments
Efficient equipment operation
Perform Lockout Tagouts
Confine space Hot work permits
Contractor Safety Orientation
Coordinate daily activities
Review OSHA Safety Standards
Development of Process Safety
Routine and preventive maintenance
Coordinate and perform water chemistry
Proficiently conduct full plant startup and shutdowns
Provide personnel training and development
Assist in outage and project planning
Generate reports, plant procedures and schedules
Basic computer skills use of company programs
Enact Facility Emergency procedures
Use of PI & D's and Technical manuals
Encourage Team-Work and assist other crafts
Manage fuel nominations for best economics

EXPERIENCE
Mulberry Cogeneration Facility 120 MW Combined Cycle QF Peaker Oct 1994 – Present
Plant Operator Gas Turbine
G.E. Frame 7EA DLN Foster Wheeler HRSG G.E. Steam Turbine Ammonia Compressor Inlet Cooling Clegg Water Treatment Zero Discharge Process 60 KPPH auxiliary boiler for supplemental steam Mark V Turbine Controls Westinghouse WDPF Allen Bradley DCIS

AG Energy Cogeneration Facility 80 MW Combined Cycle QF Base Load June 1993 – Aug. 1994
Plant Operator Gas Turbine
G.E. LM6000 & LM2500 Aero derivatives Zurn HRSG's G.E. Steam Turbine
60 KPPH auxiliary boiler for supplemental steam Load Shed capability 2 MW Black-Start Generator Indeck water treatment system Leeds North DCIS Woodard Netcon Turbine Controls

Feather River Power Plant 20 MW Bio-mass Facility QF Peaker March 1990 – June 1993
Plant Operator
Bad & Wilcox Circulating Fluidized Bed Boiler Turbodyne Steam Turbine Bailey Net 90 DCIS
U.S. Navy USS Coral Sea CV-43 October 1977 – Oct. 1981
Machinist Mate 3rd Class Assigned to and qualified Top-Watch Engine room for 600 psi Steam Propulsion Plant

Other Experience
Price Pump Manufacturing Company March 1982 – December 1989
Working Foreman in the pump assembly and testing department

EDUCATION TRAINING
High School US Navy Various company and site-specific Operator training Related Chemistry Firefighting
Annual First-Aid CPR Hazmat OSHA Regulations Participation in HRSG & 7EA user groups conferences

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4651 to 4700 of 9785)

Go to Search Parameters...

Brief Description

Electrical and instrument project manager construction, design and inspection

Open Hole LWD Logging and log analysis, M.Tech (Applied Geology)

Overhauling of Rotating equipments e.g pumps, compressors, gas turbines etc. in an oilfield

Presently working with ConocoPhillips Syria Dez.Gas Ltd. since April 2002 as a Senior Warehouse & Procurement Supervisor in Syria (Middle East) on 28 Days ON/OFF schedules through GMOS (MSI). Job Profile: Responsible overall for all aspects of materials including warehousing, procurement operations

Working In the Oil and Gas Drilling Industry Since 1986 Looking for a company that wants its employers to look after it !!

Rotating Equipment Mechanical Engineer

Senior Geologist (16+ years oil and gas experience), graduated in geology from University of Kansas in 1987.

Having 15 years of experience in oil and gas construction and maintenance feild, with Diploma in Industrial safety, Environmental management

Power Plant Operator Gas Turbine Steam Turbine Supervior Operations GE HRSG

Education: Bachelor Degree in Economics

Piping stress analysis usisng CAESAR-II, support engineering, pipe thickness calculation, pressure balance in PIPENET software, etc

Analytical Thinking , Technically Sound, Good Negotiator, Innovative

10 years of experience as chemist with exposure to most modern methods of analysis

chemist, corrosion eng, oil and gas fields

To obtain a Technician, Operator, or Specialist Position.

8 years experience in reviewing Isometric drawings, P&ID, Process Flow Diagram, General Arrangement Drawing, As-Built Drawing etc. and Joint walk with client for X-RAY / NDT, Hydro testing, Flushing, Re-instatement, Painting, Test packs to be cleared after Erection

Electrical engineer with 2 year experience

Piping desiner and profissional in PDS software.i have 8 years experiences in oil and gas projects.

2.2 Years of EXP on Primavera, MS-Project, Pro/E wildfire 2.0 and AutoCAD

Over 28 years in the oil and gas industry.

Considerable experience in Maintenance Engineering Division for Oil and Gas industry with major Production Petroleum Company in Egypt as a Maintenance Planning and scheduling Engineer as a Maximo Data Gathering and Analysis Consultant with B.P (British P

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

Mastering on ANSYS , MECHANICHAL DESKTOP,TEKLA,PDMS

Design/Detail engineering, inspection , erection & commissioning of Oil & Gas Plant,Agro-Chemical industry, Refinery, Pharmaceutical industry involving PLC & DCS system, fire alarm system, access control system, CCTV system ,Public address system, local control panel & field instruments like pH met

6+ years of experience in Reservoir Engineering and Oil Industry.

A state Engineer in refining

I have 7 years of design and construction experience in power, petrochemical and oil & gas industry.

30 years experience in the pipeline field, which includes- bidding jobs, safety procedures, quality control, facility installation, environmental knowledge, welding procedures, know procedures for filling out ground disturbance, hot and cold safe work agreements and confined space entries

I have good Communication skills, good software ability and talent to Drilling , Completion and production jobs.

Design Engineer with 2 1/2 Yr exp in control valve and flow element manufacturing industry.

Engineer with 3 years of experience in instrumentation

Working as engineer in field of chemical. i had started my carear as tranee recently a am working as asst. engineer in field of process ,design & erection.

M.E Instrumentation Engineering, PLC, DCS, Labview, Matlab

I have been in the drilling industry for about 12 years. For the last 4 years I have been working offshore in Doha, Qatar. For more than 2 years I have been a toolpush on a Friede & Goldman jackup here in the gulf. I am seeking a position as a wellsite supervisor.

Shutdown Planning, sheduling

I am a 3rd Class Power Engineer with an Operator 1 ceritficate. I have worked in the Oil and Gas sector for 6 years, from well servicing to field operating and onto midstream operator, where I have been a plant operator, trainer and on the panel. I also have 20 years experience as a manager.

Awareness of technical/ QC requirements, Work as a site based QC inspection coordinator, Interpret standards, codes & regulations, comment on supplier documentation such as inspection & test plans (ITP’S) , NDE and testing procedure, site surveillance report(SSR) and non conformance reports(NCR),

Has more than 3 years work experience in the field of Instrumentation and Control performing Detailed Design with application software such as Plant Design System for Offline Modeling, Stat-Soft and Drawing Manager, Autocad, Microstation for Instrument Location Plan, Junction Box Loading, INtools f

B.E in EEE with 2+ Years of experience in High voltage substation design

I am a Postgraduatre in Petroleum Geochemistry which I have completed from Newcastle University,England,United Kiongdom.I have finuished my Bachelors in Petrochemicakls and acquired a very good score as well.I have included all my skills and qualification below

B. Tech, Installation & Commissioning and maintenance of hydrographic survey equipment including DGPS with 3 yrs experience

Gas Plant Operations Specialist

Petroleum Engineer with 3 yr of Exp : Exp in Production Optimization, Gas Lift Optimization, Workover, Material Balance, Decline Curve Analysis, Stimulation and Reservoir Studies, Reservoir Simulation

Having exp. in plant operations of petroleum refinery & petro chemicals.Having commissioning exp. in refinery sulphur recovery unit

Construction Manager with 22-years experience in Mechanical Construction discipline for Industrial Projects (Oil & Gas, Refineries, Petrochemical Project and Power Plant Projects).

I hold a BSc in Engineering and have extensive experience in procurement and contracts activities in the upstream oil and gas projects. I seek an employment in the Middle East region as Senior Procurement /Contracts Engineer.

Engineering manager, Planning, Contracts and administration. Production engineering a specialty.

Experiance in Detailed engineering, System Engineeering (PLC ,SCADA,DCS) FEED study, instrument selection, BOM preperation, Hotcutover, start up and commissioning, engineering and feild engineering

PDS Modelling, Microstation & ACAD 3d Modelling

Bachelor’s degree in Mechanical Engineering passed from N.E.D. University of Engineering and Technology Karachi in the year 1998

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 [ 94 ] 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out