Resume - Triconex Engineer with 15+ Years Experience.

Misco Jobs

Resume #13207

CONTACT INFORMATION:
View contact information...

EDUCATION
Annamali University, Chidambaram, India
Bachelor of Engineering, 1990
- Faculty: Electronics and Instrumentation

Courses
Atlas Material Testing Technology BV, Germany, 1997
- Maintenance, Calibration & advance service training for Alpha, Beta, sunset CPS+, Ci3000, Ci4000 weathering systems

Pentasoft, Chennai, 1998
- Instrumentation Software and Applications
(Intellution HMI Fix32, ECIL DCS, OPC server-client application programming using visual C++)

Foxboro (Malaysia) Sdn.Bhd, Malaysia, 1999
- Triconex programmable safety controllers, programming

Rockwell Automation Sdn. Bhd, Malaysia, 2000
- Allen Bradley PLC RS View software

Invensys Middle East FZE, Dubai, 2002
- Intouch HMI/SCADA software, programming

Premier Consulting services, Irvine, 2003
- Functional Safety & Reliability Accreditation (FSRA) Course for IEC 61508-1 paragraph6.2.1 (h), IEC 61511-1 paragraph5.2.2 Safety Instrumented Systems. Certificate no: FSRA-03-015

ZADCO, Abu Dhabi, 2003
- HSE Induction / Orientation, H2S Hazards
- Permit To Work system (PTW)

Emirates Technical & Safety Development Centre, Abu Dhabi, 2003
- Sea Survival

TECHNICAL SKILLS
Programming
C, C++, Basic, Pascal, Oracle, SQL

PLC
Triconex: V9.6, TS1131 V3.1.2 & V4
Modicon: Momentum (Proworks)
Omron: CS series
GE Fanuc: 90-30 series
Allen-Bradley: PLC 5 & RS View
HMI/SCADA
Wonderware: Intouch
Intellution: FIX32

Protocols
ASCII, RTU, TCP/IP, UDP, Modbus, TSAA, etc

Others
Determining a Safety Integrity Level (SIL)

EXPERIENCE
Invensys Middle East FZE, Dubai
Project Engineer
3/2003 – current

Ongoing project, 2004
ZADCO, (subsidiary of ADNOC), Offshore, Abu Dhabi
- Existing Safety systems replacement (MOSAICS project)
(Six numbers of ESD and five numbers of Fire & Gas Modicon systems replaced with Triconex systems with Intouch HMI)

System Engineer
8/2002 – 2/2003
Saudi Armco, Saudi Arabia
- KHUFF condensate facility ESD systems
- Ras Tanura Refinery & Terminal ESD systems

2/2002 – 7/2003
Saudi Armco, Saudi Arabia
- HARAD GOSP2 ESD systems

11/2001 – 1/2002
Bahrain Petroleum Company (BAPCO), Bahrain
- ESD system

Foxboro Malaysia Sdn. Bhd, Malaysia
Project Engineer
4/2000 – 2/2001

Optimal Chemicals Plant, Kerteh, Malaysia
- EOG & Olefins plants ESD systems

Metronics Engineering, Malaysia
Consultant (Technical)
9/1999 – 3/2000

Ministry of Health (MOH), Malaysia
- Y2K compliance, non-compliance and contingency plans for Hospital facilities Engineering equipments & Y2K remediation up gradation of Building Automation system, HVAC

KL central (KTM), Malaysia
- Application Software Development to synchronize of Electric Train control system with PA & LED display systems

Mars Electronics, Bangalore, India
Manager (Customer Support)
3/1999 – 8/1999

- Application and service support for Omron PLC 's and its products

Scientific Instruments Co.Ltd, Chennai, India
Assistant Manager (Technical)
5/1997 – 11/1998
- Product Specialist for Atlas weathering systems
- Service support for SEIFERT Radiography systems & Data acquisition systems

Senior Service Engineer
8/1993 – 4/1997
- Service, Installation & Commissioning of Bio-Medical, Industrial Instruments & systems

Service Engineer
6/1991 – 7/1993
- Service & Installation of Analytical & Bio-Medical Instruments

EXPERIENCE IN DETAIL
ESD and F&G Design and Develop overall system
System configuration – chassis / cards
Functional block programming / Sequence block programming
Sequence of Events configuration
Emulation of Control logics
System Functional Test as per Standards

SCADA
Preparation of database and loading
Development of graphics screens
Point and Alarms configuration
Scripts writing

General
- Preparation of Functional Design Specification (FDS) and Operational & Maintenance procedures
- Preparation of System Power & Schematics drawings and Bill of Materials (BOM)
- Coordination with Vendors for System Integration
- Preparation of Factory Acceptance Test Procedure (FAT) and conduct the FAT
- Preparation of Site Acceptance Test Procedure (SAT) and conduct the SAT
- Coordination with Equipment Vendors and end users for Startup activities and Commissioning
- Commissioning of ESD and Fire & Gas Systems
- Investigation of failures or problems that arise during the commissioning and startup phase and liaises with the Project Team and the EPC contractor to resolve the issues.
- Coordination of Punch Listing and other Mechanical Completion activities related to control equipment
- Preparation of SPIR (Spare Part List and Interchangeability Record)
- Experience in Maintenance routine for ESD and Fire & Gas Systems
- Good Experience and exposure to root cause analysis and troubleshooting
- Service and trouble shooting experience in component level for any Equipments / Instruments

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2651 to 2700 of 9785)

Go to Search Parameters...

Brief Description

A Bsc in chemistry with a wide range of experiences in the mud &work over and completion fluid engineering. Able to work on my own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. Presentable, dynamic, adapt

Working as an Electrical technician in Gas purification plant, dealt with zone classified equipments,experience of UPS,PLC,Switchgears,power generation,well head solar control,CP system, fire pumps control,different projects,CMMS,RCM, I have B.Sc (Bachlor of Science) and DAE of ELECTRICAL

4 yrs experience as Pipe Stress Engineer for the Oil and Gas and Petrochemical Industry

Production Operator oil and gas field

Proactive multilingual HSE Advisor/Trainer with 7 years onshore experience in multicultural working environment. Strong interpersonal and presentation skills. Team player with abilities to develop safety programs conducive to results.

Equity Research Analyst, Fixed Income Research Analyst

Coiled Tubing Engineer with strong background in wired coiled tubing applications (E-Coil). Competently served as Coiled Tubing Technical Engineer, Operations Supervisor (personnel & equipment logistics) and Senior Coiled Tubing Engineer. Working knowledge with industry standard software.

Bachelor's Degree (4 years) in Civil Engineering, Construction Engineering, Design and Engineering, Mechanics,Hands on experiance in STAADpro 2006, MathCAD-12, AutoCAD, Smart Plant Review Soft, MS Office

More then 25 years in maintenance

I have more than 11 years of experience in petroleum and water testing in laboratory.

Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant

Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.

Panel Operator ( D.C.S & P.L.C systems) Ras Lanuf Oil and Gas processing Company (May 1998-Jan 2008).

Professionally trained creative and farsighted Painting and Insulation Inspector with over 12 years of quantifiable achievement in managing all facets of Quality Control Management in Painting within REFINERIES, GAS PLANTS, PETRO CHEMICALS, GATHERING STATIONS. Possess thorough knowledge in all face

Geophysicist Engineer./ Reservoi -Petrel- Modeller

good handle with unix ,microsoft office,self motivated

Boiler Turbine Generator Desalination Deminerlisation Aux Boiler

Ensure accuracy, programs are to exist for the inspection, testing, calibration, and routine maintenance of measurement equipment and adequate records are to be kept

Free! Large amount of experience in building & maintaining customer relationships. Managing drill and blast contracts safely, and to budget, for a variety of operations.

Scientist with 11 years R&D experience in Fischer-Tropsch catalysis, oligomerization and polymerization.

Experienced Manager in the Automotive and Retail Industries

MSc in Petroleum Engineering, simulation, reservoir engineering, welltest

12 years experience in industrial and general maintenance field.

AutoCADR2004, SolidWorks-2005/2006 & IDEAS V9.1 (3D Master Modeling in Design & Drafting), Microprotol® V32.0 (Software package for Mechanical Design & Strength Calculation of Pressure Vessel & Heat Exchanger), PIPENET (Software for Hydraulic Calculation), KYPIPE (Software for Low Pressure Sewage

Strong analytical skills and knowledge of business practices, Ability to collect and document business requirements, Report Tools (Business Object, Report Developer etc), Relational Database Design and Development including Advance Stored Procedure, Function, Triger, cursor Procesing etc, Data Model

Materials & logistics coordinator with 10 years of hands-on experience in Oil and Gas industry supporting offshore drilling, production, workover operations in CIS countries. Strong knowledge of warehousing; land, air, sea transportation; rigging and lifting; understanding of drilling operations.

10 years experience in, Gulf of Suez Petroleum Company the joint venture partner with BP in Egypt.

B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project

Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.

I am seeking a position as a Medic where my skills, previous experiences and currant safety training will provide your company with a professional medical service. The attached resume details my 24 plus years of military and offshore experience.

Structural engineer

Senior Executive with Board Experience

18 years of experience in operation and commissionng of oil&gas,refinary and petrochemicals.

Chemical engineer. 19 years experience in ammonia, syngas, Hydrogen, HyCO Plants

Analyser engineer with 15 years experience

Chemical Engineer, with extensive experience/training in environmental, health, safety and quality management systems. International experience. Fluent in Spanish, English and Portuguese. Management skills.

Experience in the field of piping-oil and gas refinery,chemical plants,working with mnc

Electrical Engineer and MBA with over 12 years Power and Water sector Commercial related expereince

B.Sc in mech. engineering, more than 15 years experience in the field of water desalination and power generation.Contract administration, material procurement, inventory control, operation and maintenance of steam/gas turbine, boilers and associated equipments.

Triconex Engineer with 15+ Years Experience.

Over 15 years of experience with reputed SABIC affiliates & International companies like Flour Daniel , Deutsche Babcock Idea Ltd. , E.I.D Parry Fertilizer & Chemicals and Protech Ltd. in important positions like Mechanical Engineer, Mechanical Superintendent, Manager mechanical etc., with increasi

I am basically an Instrumentation Engineer from India, I have worked in the field of process industries in India. I am working in saudi Arabia as control system engineer. I have worked with BMS, Scada, DCS, CCMS control systems. Also I have worked for the installation of UPSs of 1KVA to 500KVA UPSs

12 Years experience in Design & Detailed Engineering of Piping Systems for FPSO, Fixed Platform, Oil & Gas, Refinery, Petrochemical & Fertilizers plants . Currently working in Hyundai Heavy Industries (HHI) in South Korea as Manager (Piping).

11 years working as NDT& Welding Inspector , highly familiar with : ASME, API, ASTM, ANSI and AWS D1-1 codes and standard.

HSE /SAFETY -Engineer /Specialist /Advisor /Officer - with 7 years of experience in Oil & Gas

Process Engineer in WorleyParsons, a leading global company working in oil and gas industries. Briefly, my job description includes performing PFDs, PI&D, Safety review/approval, process simulations, equipment sizing, process calculations, and optimization and conceptual studies.

Directilnal Drilling

Diploma In Electrical Engineering - Worker's Institute of Technology

16 years in drilling and completion fluids, experience and knowledge in cementing too.

PDMS, SP3D, PDS Piping Designer

First Prev 51 52 53 [ 54 ] 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out