Resume - I am experienced cased hole engineer

Misco Jobs

Resume #13270

CONTACT INFORMATION:
View contact information...

BACKGROUND: B.Sc. of chemistry with grade good - 1997

CURRENT JOB:
I am working as a Senior Logging Engineer for Aker Maritime Oman [Aker Kvaerner Group] from 03/03 till now.

PREVIOUS JOB:
Senior Logging Engineer in SAPESCO-Egypt from 04/98 to 03/03.

EXPERIENCE:
My experience concerning different kind of measurements
* Memory gauges & its interpretation [GRC-METROLOG-SPARTEK].
* SRO gauges[GRC-SPARTEK].
* Bottom hole sampler[LEUTERT].
* Memory production logging & its interpretation [SONDEX TOOLS].
* Electronic production logging & its interpretation [SONDEX-COMPUTALOG TOOLS].
* Multi finger caliper & its interpretation [24, 40 and 60 arm tool with SONDEX TOOLS].
* TCP & cased hole perforation [OWEN OIL TOOLS].
* Correlation & logging under coiled tubing [SONDEX –COMPUTALOG TOOLS].
* Through tubing perforation [OWEN OIL TOOLS].
* Bridge plug & tubing bunch operations [OWEN OIL TOOLS-PROBE TOOLS-TUCKER TOOLS].
* CNL & CBL-VDL logs [PROBE TOOLS].
* X-y caliper logs [Memory & SRO with SONDEX TOOLS].
*Running tools with either Slick line or Electric line unit [HALLIBURTON-D&W-SODESP Units].

General courses:
1) English course at A.U.C.
2) TOEFL course with grade (543/660).
3) Office95 course at A.U.C.

Applied courses:
1) Training course on chemical analysis @ [Assiut Oil Refinery Factory-Egypt] ON 1996.
2) TWO Interpretation courses on PL software {by Deter Barsch-PLS} ON 1998 AND 2000.
3) Safety operations of radioactive materials course @[nuclear energy institute-Egypt] ON 1999.
4) TCP guns & Cased hole perforation course [by Jif Sinclair & Craig beverage-Owen oil tools] ON2000.
5) Safety operations of perforating guns {by Cyril Sumner-Owen Oil Tools] ON 2000.
6) Well control course @ Syria [by Tri Star Institute –Scotland] ON 2000.
7) Multi finger caliper maintenance & interpretation course [by j.flinders-Sondex (UK)] ON 2000.
8) Completion & wire line operations course by SAPESCO major stuff on 1998.
10) Well control course@ Syria {by tri star institute-Scotland} ON 2001.
11) MultiFinder caliper interpretation course [by J. Flinders-SONDEX (UK)] ON 2001.
12) MultiFinder caliper maintenance and operation course for 60-arm tool
[by j.flinders- Sondex (UK)] ON 2002.

13) First aid-H2S Hazards-Work Permit level2 and Fire Fighting Courses
[at AFPC (SHELL) training center –Syria].
14) H2S-HSE and Defensive Driving courses [PDO-OMAN].
LOCATIONS:
- I had done Logging jobs for nearly all Egyptian companies in Desert and Red Sea
In Syria
AFPC (Syria): Deir El-Zor
DEZPC (Syria): Deir El-Zor

In Azerbaijan
Salyan (AZB): BAKU

In Iraq
North Iraq pet. Co.:Kirkuk[Iraq].
South Iraq pet.Co.:Basrah[iraq].

And also in all Oman Oil fields

Duties in job:
- Run different logging services[MPLT-EPLT-Casing Guns-Tubing Guns-MMFCL-EMCFL-etc].
- Train new engineers on logging services.
- Specify needed training courses for each engineer.
- Train new members on MPLT,EPLT,Perforation and other services.
- Train new engineers on PLT and MFCL interpretaion.
- Start up MultiFinder Caliper Logging in our branches in Syria and Egypt.
- Act as Operation Supervisor in case of OS absent.

ACHIEVEMENTS:
1-hundreds of pres.-temp. Memory gauges runs.
2-50 job of MPLT in Egypt and 5 in Syria.
3-20 MFCL in Egypt and 15 in Syria.
4-50 perforation job in Egypt and 100 in Azerbaijan.
5-15 CBL and CNL log in Azerbaijan.
6-100 MPLT job in Oman.
7-50 MPLT log under coiled tubing in Oman.
8-Train around 10 new engineers on different logging services.
9-Supervise hundred of logging jobs in Egypt, Azerbijan, Syria, Iraq and Oman.
10-interpreate a lot of PLT and Caliper logs.
11-Act as Slickline, Electricline Operator in a lot of logs.
12-Start up operations and make new Setup in new locations in Egypt,Syria and Iraq.

*I had worked in Azerbaijan for a multinational company [Caspian Wire line
Services (CWS)] in an exchange session bet CWS & SAPESCO and I have worked with different types of logging and perforating systems.

*I had worked with Sondex Tools, Probe, Computalog And Owen
Tools.

*I had worked with different systems [AT+, Warrior, Sondex
Memlog, Pl And Aqusition System For Multifinger Caliper].

*I was in mission in Iraq in 2001 to establish new Setup for AWELCO [Arab Well Logging Company] in IRAQ to work with Sondex tools; I was responsible for train AWELCO engineers on PLT jobs [operation, Safety, Maintenance and interpretation].

I have a valid Omani Driving License and Visa.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6851 to 6900 of 10923)

Go to Search Parameters...

Brief Description

Piping design engineer having 4 experience in ,PDS,CADWORX 2008 AUTOCAD 2008.

Power Engineer 3rd class

run excavator for 7 years also ticketed to run Dozer,Graders,Loaders,Articulated Rock Trucks,Class 1 Drivers Licence and all oilfield tickets

Experience in oilfield constrution including Saftey training filling out required permits for hot work and confiend space as well as bolt up and tank work. Very familiar in all aspects of running flow lines, gas and oil headers systems and maitanence of wells. Great work attitude

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

M.Tech & Exe. MBA in Oil & Gas domain with 3+yrs exp

Over 18 years' experience in design and construction of water & wastewater treatment projects - industrial & municipal

GIS-Geophysicist/Databse Administrator

A pragmatic and well balanced project manager/engineer with a ‘can-do’ attitude.

During 13 years I was working at rig site on many different wells. I know very well Rig equipment, Drilling tehnology, Mud properties, Fishing, Coring. In many situation I solved stuck, kick and lost circulation problems.

I am a Geophysicist with seven years experience in Petroleum Exploration. Extensive experience working with multidisciplinary teams on exploration, interpretation and prospect generation.Experienced geophysics workstation user.Excellent computer skills and good knowledge of technical software.

I am experienced cased hole engineer

Presently i am incharge of Utlities area consists of Steam Boilers & Turbines. Specialist in all type of watyer treatments plants.

Mechanical engineer looking for job in mechanical field

Diploma in Mechanical Engineeering, Diploma in Materials Management and Diploma in Exports & Imports. Working in a Multinational Company M/s. Chemtex Consulting of India Pvt. Ltd, India Since Apil’ 2004 as Procurement Engineer

Certified Chemical engineer with Masters Degree

over 10 years in the oil and gas industry with experience from FEED to Hook -up and Commissioning in the role of Lead Document Controller

P&ID design draftsman. Very good experience in PDS2D, AutoCAD, AutoPLANT, Smartsketch, Microstation, I/RAS B, AutoLisp, AutoCAD VBA, Scripts etc.

I am M.Tech. in Applied Geophysics from IIT Roorkee. I am working for an OIL COMPANY as a Logging Engineer.

More than 17 years experience in welding inspection and NDT testing. Main duties is to ensure the fabrication meet the requirements of all specifications and procedures.

I’m doing my job with the highest possible efficiency.

Over 7 years of experiences in Project Planning, Project Control, Project Coordination for Oil and Gas Projects, Refinery and Gas Turbine Power Plant ,B.E in Civil Eng.,Certificate course in Primavera Ver . P3, Pe/c Ver.3.5 and Pe/c Ver 5.0,MS Project and MS office applications,AutoCAD 2000

PIPING DESIGNER

Vibration Analyst Level-II certified by BINDT for Condition Monitoring of all Rotating Equipments

Courthouse trained on Section/Township/Range and Metes and Bounds in Kentucky and Indiana. Worked three years in ten counties in Texas completing many types of research in courthouses and abstract plants. In East Texas I have spent about 10 months on various curative projects. Worked as trainer .

8.5 years of experience in Plant layout and Piping Engineering/CAD Administration on Petrochemicals, Refineries and Mining & Metallurgy projects

MSc. Geology with a PGDiploma in GIS and completed a PGDiploma in Petroleum Exploration. 6 months exp.as Trainee Mud Logger.

Power plant operator, experience in operate the compressors, turbine

A Chemical Engineer with 10 years of experience in Procurement in Oil/Gas and Minerals Industry

I have Bachelors Degree in Mechanical Engineering with 18 years Experience India, Middle East and African countries in Oil, Gas sector both onshore and offshore fields.

turbine repair, upgrade, assembly, balance,blading,and machine work

I am a specialist working in the Distillation section, my duty to control and monitor the vacuum column and the atmospheric column.

36 year old gentleman looking for a job as a rigger. I have been in this industry for years, please feel free to contact me if ther is anything more you would like to no about me. Thank you

Experienced Work Over & completions wellsite Supervisor, safety orientated, Well Site Testing, Perforating, CBM Fracing, WIreline, Slickline, Logging, Fishing, Swabbing, Snubbing, Cementing, Coil Tubing, Heli-Portable Supervision, Project Coordinating

Senior EPC/EPCM Manager with +30 years experience of successful multi-disciplined project & program management; successfully organizing, managing and directing large mining, heavy civil and infrastructure projects

drilling Bs, exploraion and production Ms, production optimisation and developement management

MBA/Chemical Engineer with 10 years experience in Oil & Gas plant operation. Expert eperience in commissioning /operation in refinery/petrochemical/Cryogenic LPG terminal/hand on experiance in DCS/quality control/Marketing

MSc Geology Petroleum Geophysicist/Geologist

Over Forty years experience in the oil and gas industry specializing in drilling, work over, and lease construction supervision. Experience in both international and domestic operations in remote and harsh conditions.

Experienced cost controller

Experienced oil/gas/mining/heavy civil project manager. Currently PMT Construction Manager on $8.5 billion dollar project.

I have a strong foundation in Computer Aided Drafting, Pipe Drafting and Design, Mechanical Design-3D Modeling, Solidworks and Inventor.

B.S. Mechanical Engineer. Member of Mechanical Engineer’s Chamber / TURKEY; Qualifications : Bachelor of Science in Mechanical Engineering (University of Anadolu / TURKEY 1980-1984) , Certified Welding Inspector ( CSWIP 3.1, Cert No: 37291, E

Chemical Engineer with 7+ years of experience and possessing commendable skills in operation & control of complex high pressure petrochemical reactions in high capacity LLDPE plant

Senior Condition Monitoring Technician having over Seven years of working experience in data base creation, data acquisition and vibration data analysis of rotating equipment used in Oil and Gas industries

A Singaporean Trained Instrumentation Control Engineer

Process Engineer with exp of FEED & EPC Proj for Refinery, Oil&Gas Plant

Having worked in three countries in industries such as: Printing, Tourism, Piping Fabrication, Oil and Gas construction and erection projects

Specialty in building PZ-7,8,9,11,12,13 pumps total creation of rig and breakdown of rig. Controlled mud weight and every circulation loss chemicals

“Mechanical Maintenance engineer” / “Electrical engineer”

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 [ 138 ] 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out