Resume - QA/QC ENGINEER

Misco Jobs

Resume #13472

CONTACT INFORMATION:
View contact information...

Languages: Arabic & English {excellent spoken AND written}

Graduation: 1) B.SC of Mechanical Engineering /Production Dept., in June 1981, from Alexandria University- Egypt with general grade {GOOD}, and {Very good} for the project in TIG welding.

2) Post graduation (Diploma in inspection) From comibassal Int'l center for inspection Alexandria /Egypt in 1987 with grade GOOD.

Professional Levels & Courses
- CSWIP 3.1
- ASNT LEVEL II in R/T, U/T, P/T and M/t
- Visual Inspection
- Mechanical & Destructive Tests
- Design of Petroleum and Petrochemical Plants
- Personal survival techniques, search and rescue on board
- Offshore Helicopter under water Escape(HUET)
- ISO 9000
- Computer{Windows up to 2000,Autocad 14, Excel and word 2000}

Q.A/Q.C Manager
Professional Experience
In field of Petroleum /Gas Sector and power generation sector
From May 2004 up to now:
Company: Germanicher Lloyd – G L
Position: Senior Welding & Q.C Engineer
Project: Simian Saffier platform at deep water, Plets and off shore pipelines

From May 2003 up to May2004:
Company: DSD Egypt " ferrometalico"
Position: Q.C /Q.A site manager
Project: Egyptian LNG project Damitta- Egypt

Duties:
- Plan, schedule and supervise executing of quality systems.
- Responsible for quality planning, assurance & control.
- Ensuring satisfactory interface with the contractor's quality representatives and review contractor's construction quality control procedures to assess compliance to contractual agreements.
- Recommended & co-ordinate establishing of specifications, standard and practices

From October 2002 up to May 2003:
Company: CARLO GAVAZZI EGYPT
Project: Onshore Gas Compression Station –RASHPETCO.
Position: Q.A/ Q.C Manager.
Duties: Plan, schedule and supervise executing of quality systems for Petroleum, industrial and power generation companies
- Inspection of Engineering, Petroleum and Petrochemical equipment.
- Witnessing NDT such as R/T – U/T – P/T - M/T
- Recommended & co-ordinate establishing of specifications, standard and practices

From January 1989 up to July 2003:
Company: COMIBASSAL INTERNATIONAL CONTROLLERS
Position: Head of Mechanical Section.
Duties: Inspection of Engineering, Petroleum and Petrochemical equipment.
- Witnessing NDT such as R/T – U/T – P/T - M/T
- Recommended & co-ordinate establishing of specifications, standard and practices

My assignments were affected for many Industrial, oil, Petroleum and petrochemical companies either inside Egypt or abroad such as schlemberger, Gapco, Somid, Midor, APC, ANERPC, KOC(through K.S.R.C), HADISOLB, EZZ, SUIZ CEMENT CO. and for major Authorities in Egypt such as Petroleum Sector, Power Generation Sector…etc
The following countries were visited many times in my missions abroad for inspecting equipments, complete production lines, line Pipes, valves, Pumps, Tanks, Hot rolled Coils, Air compressors, Different engineering materials, Castings, Petroleum Equipments,…etc.

Germany France Sweden
England Holland Italy
Spain Austria Kuwait
Belgium Brazil Yugoslavia
Ukraine China Turkey
U.A.E

Company: Daelim Engineers &Contractors {Korean Company}
Position: SENIOR WELDING INSPECTOR
Project: Midor Refinery Project
Location: Alexandria / Egypt

Company: TECHNIP {ITALIAN Company}
Position: Q.C& welding Inspector
Project: Alexandria Refinery Project {ANERPC}
Location: Alexandria / Egypt

The duties for both were similar and can be summarized as follows:
- Interpreting R/T Films
- Witnessing U/T, M/T And P/T
- Witnessing Hydro Test, Pneumatic Test, Hardness Test.
- Follow Up Progress Of Punch List & Outstanding Works.

The period between 1993-1994
Company: Al Manhal Water Factory- Riyadh/ Saudi Arabia
Position: Maintenance Engineer
Duties: Performs predictive, preventive and maintenance repairs on the factory equipment/machineries and support different factory's lines.
- Schedules, plan and implements daily, weekly and annual maintenance of factory equipment/machineries.

- Performs trouble shooting and repair on production equipment /machineries to insure consistent performance of factory equipments with top rate productivity and reliability.
- Analyses factors that cause inconsistence of equipments/machineries' performance and formulates steps of corrective measures to solve such troubles.
- Plans and performs routine functions such as repairs, calibrations, set-ups and parameter deviations of the designed equipment/machineries in order to meet the manufacturing standards.
- Controls the spare parts and tools needs, prioritizing the most urgent spare parts needs.
- Performs and executes overhauling, trouble-shooting and repairs of all factory's equipment/machineries in case of breakdowns or possible troubles that will arise and performs appropriate actions immediately.

The period between 1997-1998.
Company: Kuwait Oil Company- Mina Al-Ahmady/ Kuwait Through the K.S.R.C
Position: Technical coordinator for Marine and Export services
Duties:
1-Review material requisition specifications for store stock and direct charge material

2-Reviews scope of inspection for in-house examination and for 3rd party inspection

3-Recommended and co-ordinate establishing of specifications, standards and practices.

4- Leads a group of material engineers on team assignments and estimates quantities required from project DWG and draft lists.

5-Maintains progress records and monitors any difficulties that may be encountered for procurement of materials for project

6-Liasons with stores& purchasing department personnel to clarify specifications of required materials and for progressing of outstanding orders.

The period between 1981 to 1989

1981 to 1984: Military service " Maintenance Engineer- Egyptian Navy Forces Alexandria / Ras- Alteen"

1985 to 1985: Mechanical Engineer for Moharam Press {Alexandria – Egypt}

1985 to 1989: Piping Engineer for Al-buhayra Water Co.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 10182)

Go to Search Parameters...

Brief Description

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Strengths: detail oriented, flexible, analytical, self-motivated, adaptable, effective communicator and articulate. Experience in field drilling operation management with extensive hands-on technical, administrative and managerial functions; drilling technology assessment & implementation, contract

Over 33 years of working experience within India and abroad as Electrical supervisor, Senior Electrical Foreman, Electrical Engineer Commissioning Engineer, Electrical specialist and Specialist Senior Consultant.

Master degree in Welding.Inspection engineer experienced in Oil abnd Gas industry

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

I am having 14 years of experience in Instrumentation design, construction and commissioning activities in the field of refineries, fertilizer units and Oil & Gas. From last three and half years I am working in Nigeria for major oil & gas giants like SHELL, TOTAL, AGIP and EXXON MOBIL for their upst

Having 15 years Experience in Instrumentation and Control in Oil & Gas, Refineries (FCCU, CDU units), NGL Plant, Gas plant,LNG plant and Petrochemical Plants, Pox Unit, Process gas compressors, Gas Turbine generator (GTG) Units. Work Exposure of Performing safety critical, Operatability critical pr

- Self reliant, reliable self starter, Wide knowledge of control and process instrumentation, Experience in risk and hazardous operations analysis, Good team worker

Seeking middle level management post having 17 years of experience in the field of utilites(HP Boiler(Gas/Oil fired),RO/DM PLANT,COOLING TOWERS,AIR COOLED CONDENSER AND MULTIPLE EVAPORATOR

16 years of experience as a highly organized Executive in Oil & Gas Based Infrastructure / Construction and Electricity Management Companies; effective at multitasking and working under pressure to accomplish overall objectives.

20 Years of consolidated experience in classroom and on the Job Training and discipline specific Competence Assurance Assessment in the Oil and Gas Industry. EPC&C and maintenance activities in Petrochemical, Refinery, LNG, LPG, Power generation plant, Cement plant, Desalination plant, Revamping and

Presently Marine & HSE Supt on board FPSO ABO for 2 years. Total 4 Years FPSO Experience . 15 years on Tankers

20 years working on oil refinery as a tank farm panel operator.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Over 30 years of experience in I&E Construction for oil & gas and petrochem. industries includes onshore and offshore. Of this, 25 yrs in Supervisory and project management.

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

I have experience in procurement management, asset management systems, advanced supplier relationships, major supply agreements, ISO quality, procedure development, business development, sales and marketing. My reputation is based on integrity, proven supply strategies, measurable deliverables and

Piping Designer. Petro-chem & Power background; design in 2D and 3D environments.

Overall Exp. 14+ years.

Positive, self-motivated and results-driven, a proactive and confident professional with extensive expertise gained in an environment where accuracy and attention to detail are vital. Capable of utilising resources, both human and material, to streamline workflow and achieve time-sensitive deadline

An experienced Training & Development Manager used to setting up training projects for classroom, workshop and competency based models within the O&G inductries.

Condition monitoring engineer, rotating machinery engineer, mechanical engineer, maintenanace engineer

Reservoir Engineer with proven record of accomplishments. Extensive experience in pressure analysis, property evaluation, reserves determination, operations, and computer modelling with a skill for enhancing company value. Proven ability to find additional reserves where others have already looked.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

Seismic field processing on Promax for 10 years and actually short experience on CGG software

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

O&G prospect/areal HC content assessment by a hand-picked series of near-surface, geochem-related, composited anomalies very indicative of commercial deposits.

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Geoscientist with over 20 years experience with major oil companies in Europe and South America in exploration, production and business development projects.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

An experience individual with excellent knowledge of Sales/Marketing, Freight handling, Imports/ Exports Management with the objective of achieving organizational goals and making it a strong profit center seeks an opportunity in managerial capacity

I offer a broad range of upstream petroleum business skills and leadership experience covering exploration/development planning and LNG project execution, subsurface and production facilities planning, economic analysis, strategic planning, commercial/legal negotiations and corporate communications.

Senior Project Manager, International Industrial Multi-Disciplinary &Muli-Cultural Projects

Negotiations, planning, economics in international joint venture gas and midstream projects for past 14+ years. Started career as reservoir engineer with Exxon.

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

. I have sixteen years refinery experience for four location – Texaco Port Arthur, Basis petroleum Krotz Springs - Louisiana, Basis petroleum Houston – Texas and Basis petroleum Texas City refinery. Basis petroleum has been acquired by Valero in 1997.

Analytical chemist in the fields of oil & gas, petrochemical, fertilizers, pesticides and pharmaceuticals.

Supervise small and mid-sized projects involving maintenance/rehabilitation/repair of pipelines and piping systems, good experience at piping equipment selection and sizing, experience with pigging facilities design, experience at pipeline pigging, fluent in English, French and Arabic

•Worked as commissioning Engineer and Project Liaison Manager in four major Petrochemicals (Polymer) projects, worth $30 Million, $50 Million, $20 Millions and again $20 Millions.

I am an AWS-Certified Welding Inspector and a Philippine licensed Mechanical Engineer with 15 years experience in Welding/Piping/Structural/Tanks inspection.

INSTRUMENTATION ENGINEER

I&C ENGINEER. ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING

Technical / Lead Safety Engineer

NDT inspector LVL II

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out