Resume - PDS Piping designer Engineer

Misco Jobs

Resume #13619

CONTACT INFORMATION:
View contact information...

Career Summary
Ten years experience in oil & gas CAD piping design: this includes isometrics and layout have worked on oil & gas projects for such companies as ABB, Amoco, Halliburton in Brazil, Linde and Technip in Paris, France and Norway.
Software used has included Intergraph PDS, PDMS, Microstation 2D, 3D, OMNI Pipe and AutoCAD.
Proven ability to work in a multicultural environment; with multilingual skills in Norwegian, English, Vietnamese and Cantonese.

Career History

Jan. 2004 – Present ABB OFFSHORE TECHNOLOGY
Senior PDS Piping Designer
Project: EKOFISK GREATER MODIFICATION
Responsible for
-Design and modification lines by PDS
-Inspection Iso

Feb. 2003 – Dec. 2003

Statoil Mongstad Oil Refinery- Norway
Senior PDS Piping Designer
Project: Energy Efficiency and Steam Production Project
Responsible for the design of new pipe rack
Design of new fuel gas lines, flare lines and tie in to existing lines during the shutdown period.
Site survey

July 2002 – Dec. 2002
TECHNIP - Paris, France.
Senior PDS Piping Designer
Project: AMP2 basic engineering for a utility offshore platform in Nigeria oil field.
Responsible for the Piping Firewater distribution system

Jan. 2002 - July 2002
HALLIBURTON - Rio Brazil
Senior PDS Piping Designer
Project: FPSO BARRACUDA
Responsible for piping design and isometric drawing production of Separation Module Topside M01A&M01B
Piping Designer for the Firewater system, Utility lines and drainage System

Dec. 2000-Jan.2002
ABB OFFSHORE TECHNOLOGY - Norway
Senior PDS Piping Designer
Project: FPSO Sendje Berge WI plant
Modifications to increase production capacity at sendje berge, this ship have been prepared for a phased development for the Ceiba Field in Equatorial Guinea.
Responsible for piping design the fine filter package, general arrangement drawings, isometrics, trouble shooting, clash check equipment and pipe supports.

Aug. 2000-Dec. 2000
OTECO - Paris
Senior PDS Piping Designer
Project: CARLING 2000
An upgrading onshore project in France; my responsibilities were modelling pipe racks and general arrangement drawings.

Sep. 1998-June 2000
TECHNIP - Paris
Senior PDS Piping Designer
Project: Onshore Gas Development Project Phase II (ODG II)
Software used was PDS 3D CAD; responsible for checking piping model, isometrics, trouble shooting, input pipe support design, general arrangement piping drawings for this second phase of the ODG II. That involved the doubling of gas processing capacity at Habshan, Abu Dhabi.

Apr. 1998-July 1998
UMOE Technology, Oslo
Senior Piping Designer
Project: FPU (Floating Production Unit) being designed
Client was the Norwegian company, Norsk Hydro; piping design of the first stage of separation of oil, water and gas then the storage of these products prior to tanker loading by sub-sea facilities.
This project was completely designed using PDS software: additional duties include isometric extraction of produced lines for my area of responsibility.

Jan. 1998-Apr. 1998
Linde AG, Munich
Piping Engineer
Project was the onshore modification of an existing onshore plant in Hungary. By using PDS 3D CAD.
Responsible for the input of existing piping into the system, next task was to input then model new equipment hook-up to existing facilities.

Feb. 1997-Dec. 1998
Amoco Norway Oil Company
Piping Engineer
Project: Valhall - Equipment Module Project
Software was PDS 3D CAD: responsible for plot plans, piping GA., isometric production, design review, clash report, weight report, co-ordinate with the yard, responsible for flare header system process system.

Dec. 1996-Feb. 1997
ABB OFFSHORE TECHNOLOGY
Piping Engineer
Client was Amoco Norway Oil Company
Project: Valhall - Equipment Module Tender Team
Input of all existing equipment's piping studies into PDS 3D CAD

Nov.1996-Dec.1996
AKER MARITIME – Norway
Piping Engineer
Client: Saga Petroleum
Project: New Wellhead Platform Varg in the North Sea
Using Microstation 2D to design pipe support's drawings

Feb.1996-Oct.1996 KVÆRNER ENGINEERING AS
Piping Engineer
Client: Statoil
Project: Sleipner Vest process platform in the North Sea
PDS 3D CAD
-Inspection ISO
-As built ISO

Aug.1995-Jan.1996 ABB OFFSHORE TECHNOLOGY AS
Piping Engineer
Client: Amoco, Norway
Project: New Wellhead platform for the Valhall Field in the North Sea
PDS 3D CAD
- Equipment layout
- ISO Production
- Plot Plans
- The firewater system

1994 - 1995 TECHPOWER

1994 - 1995 Piping Engineer
Client: Statoil, Kårstø
Project: Sleipner Condensate Terminal
Microstation 2D
-Responsible for all modification of P&ID`s belong to Sleipner Condensate Terminal and Sleipner Compressor Project

1992 - 1994 ABB GLOBAL ENGINEERING, NORWAY

1993 Piping Engineer
Client: Statoil Kårstø
Project: Sleipner Condensate Terminal
-Responsible for Field modification
-As built (GA`s ISO's, Pipe Support)

1993 ABB GLOBAL ENGINEERING, NORWAY
Piping Engineer
Client: Smedvig Rig
Project: Smedvig Water Injection Rig for Ekofisk field
Microstation 2D
-Complete preparation of layout drawings
-Plot plans
-Piping Arrangement
-ISO Drafting
-Safety Plot plans

1992 Trainee
Client: Statoil
Project: Sleipner Compressor Kårstø
-ISO Drafting
-Modification and Piping GA

1992 AKER ENGINEERING, BERGEN (2 months)
Trainee
-Preparation of job-description for Statoil

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 10813)

Go to Search Parameters...

Brief Description

I offer extensive experience in construction and heavy industry in a wide range of roles and positions with a detailed theoretical and practical working knowledge of the following that I have developed over the previous 22 years of my career as both an OHS&E Professional and a team leader.

I am Electronics & Communication grad from India with more than 3 years of experience in Electrical & Instrumentation.I have through knowledge of SAP PM module.

Experienced Landman seeking a challenging work environment

BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.

Three years experience as an engineering tech, 10 years experience with data manipulation.

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

Snubbing / Workover Supervisor, Field Technician.

Senior Design Engineer - Electrical

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Working Offshore as an engineer and mechanic for 15 years

PDS Piping designer Engineer

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Construction Mgr.- Piping Eng.

Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist

Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.

v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.

aws cawi

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

Industrial Journeyman Electrician-28 years

I have 18 years experience in the Oil Service Industry, involved in all aspects of Coiled Tubing, Nitrogen Services, Fluid Pumping, N2/He Leaktesting(HLD), Pipeline Pigging/Testing & Well Testing. My last permanent position was Service Supervisor II for Halliburton Coiled Tubing in Australia. Since

Experienced Senior Civil/Structural Designer with mostly Petro-Chem background

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Rotating Equipment Engineer

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Linux, Ansoft designer, Auto CAD, C++ and Microsoft Office

MECHANICAL ENGINEER & QUALIFIED ASNT LEVEL II IN UT.RT,PT & MPT....

Welding inspector

Lease Acquisition

Dear Sir, I believe that I have the capabilities and the experience that enable me to match the requirements of this job. I have had a considerable experience in many companies and many domains.

Seeking challenging assignments as PDS Structural Designer and Senior Draughtsman with a reputed organisation in the Construction Industry.Based on my skills in Civil/Structural Designer Using Application PDS, SPR, AutoCAD, Microstation, I am confident that I would be a great addition to your team.

Apply for post of Electronics and Instrumentation engineering

i am graduate from electrical engineering and i,m good at computer . i have ability to work any time and any place

18 Years of experience in Electronics & Instrumentation field at supervisory level in Construction & Maintenance, including 3 ½ Years of Gulf Experience. Known for superior integrity, accommodative nature, sincere & honest team member.

In June 2003, I completed Diploma in Mechanical Engineering from M.S.University, and recently I passed NDT LEVEL II Examination from FLAWTECH INSPECTION SERVICES. And I have 3 years work experience in mechanical field.

strong drilling, geological, petrophysical, coring/core analysis, OH/CH log interpretation & reservoir studies background,worked with Halliburton,Reslab,QP & Schlumberger,Involve in Operations/Well Site/Petroleum Development,reservoir characterization,Image analysis, FMI/OBMI/MSD,Mentor &training

ROV Pilot/Technician with two years experience on workclass ROV

SKILLS: Pipefitting and related works.

drafting 3D and 2D modeling and design of some plans from field work, mechanical, structural in different applications such as Cadworxs P&ID 2009, Cadworx Plant 2009, Autocad 2008

Completions Engineer, Mechanical Engineer, Technical Sales Representative

Piping designer

Skilled in Electrical and Instrumentation Systems, associated with sensors, machines, electrical generating units and switchgear systems and programing and applications of PLC, DCS

Experienced Oil and Gas HSE professional

I am an Italian naval architect. I graduated from The University of Genoa specializing in Marine engineering and naval architecture

Bachelor in Chemical Engineering (Co-op option) (University of Ottawa, Canada) Hard worker, enthousiastic.

Major Course Work: Process Heat Transfer, Chemical Engineering Plant Design I, II, and III, Kinetics and Reactor Design, Process Dynamics and Control, Mass Transfer, Unit Operations, and Chemical Economics and Design

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out