Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #13881 next resume »»
CONTACT INFORMATION:
View contact information...

QUALIFICATION:
B.Sc. D.M.I.T (Instrument Technology)
Year of Graduation: June 1976 (From Madras Institute of Technology)

OBJECTIVE
Seeking a progressive career in Instrumentation Projects especially in Oil & Gas, Refinery, Petrochemical Sectors

WORK EXPERIENCE
1.With M/s. CEGELEC, Abu Dhabi, U.A.E, from 24.02.2005 to 23.05.2005 as Instrument Engineer
Up gradation of Honeywell TDS 3000 DCS to Experion PKS system at RUWAIS Fertilizer Industries (FERTIL), at RUWAIS, in United Arab Emirates.

Control System Upgrade (CSU) Project at Abu Dhabi Gas Liquification Company Limited (ADGAS)At DasIsland, United Arab Emirates.

2. With M/s. DAR AL RIYADH CONSULTANTS, Kingdom Of Saudi Arabia, from 28.08.2004 to 03.10.2004 as Instrument Engineer.

At DCS Replacement Project at Saudi European Petrochemical Company (IBN ZAHR), a SABIC Affiliate, Al Jubail, Kingdom Of Saudi Arabia, during Total Complex Turnaround 2004.

The project is replacement of Yokogawa Centum XL System with CS 3000 System during Shutdown period involving installation of system consoles/ cabinets, interface cabinets, laying of Cables &termination, checking of 5302 Analog, Digital& ESD Loops and functional checks.

3. With M/s. SICAL YAMATAKE LIMITED, Chennai (Formerly as SEMMAC LIMITED)
Heading Onshore Instrumentation Division

July 1996 - August 2004
July 1996 - June 1997 as Senior Manager (Projects)
July 1997 – August 2004 as Chief Manager (Projects)

The company SICAL YAMATAKE LIMITED is a joint venture promoted by
M. A. Chidambaram Group of India, YAMATAKE CORPORATION of Japan and JURONG ENGINEERING of Singapore.

The projects executed are as per Annexure I.

Responsibilities

* Business Developments, Preparation of Tenders / Techno-commercial offers
- Attending Techno-commercial discussions
- Preparation of Specification for Instruments, Instrument Installation Drawings
- Technical Evaluation of Vendors, Preparation of QA/QC Documents
- Procurement of Project Supply materials, Vendor management, development & review
- Execution of projects through a team of Resident Engineers
- Controlling site management, administration, mobilising manpower & resources
- Responsible for Cost Control and Quality Control

4. With M/s. NRC Engineers (Madras), Madras
January 1989 - June 1996 as Project Manager at Project Sites.

The projects executed are as per Annexure II

Responsibilities
* Preparation of Tenders & Techno Commercial Offers
- Mobilising site, Recruiting Manpower / Sub contractors
- Leading the Team of Engineers and workforce at Project Site
- Planning, QA/QC, Site Management, Monitoring the projects
- Interacting with clients / consultants and executing the projects in all respects

5. With M/s. Alkan Engineering (India) Private Limited, Bombay
February 1977 - December 1988 at Project Sites

Feb. 1977 - Apr. 1980 as Junior. Engineer
May 1980 - July 1983 as Assistant. Engineer
Aug. 1983 - Dec.1988 as Senior. Engineer

The projects executed are as per Annexure III.

Responsibilities
- Planning the schedules, Techno Commercial Offer Preparation
- Executing the Projects
- Interacting with clients & consultants at various levels for smooth execution of Projects.

ANNEXURE - I

With M/s. SICAL YAMATAKE Limited (Formerly M/s. SEMMAC Limited) Responsible for executing the following Instrumentation Projects from July 1996 to August 2004. Responsibilities includes techno commercial bid Preparation/discussions, mobilising manpower, executing the projects through a team of engineers.

Project Client Location Consultant

Membrane cell - Caustic Soda Plant SPIC Heavy Chemicals Chennai Birla Tech

DCS Systems for Caustic Soda Plant SPIC Heavy Chemicals Chennai Birla Tech

Sulphuric Acid and Phosphoric Acid Projects Indo Jordan Chemicals Company Eshidiya, Jordan KREBS – France

Revamping of Ammonia Plant SPIC Tuticorin SPIC-SMO

Insitu Combustion Project Oil & Natural Gas Commission Limited Balol Engineers India Limited

Nylon 6,6 Plant Thapar Dupont Ltd Chennai Chemtex Engg.

PRDS Project South India Sugars Ltd Villupuram South India Sugars

60 MW Co-generation Power Project Rain Calcining Ltd Visakapatnam Sargent & Laundy

Gas Turbine Conversion Project Indo Gulf Fertilizers & Chemicals Corn. Ltd Jagdishpur In house

Caustic Evaporation Unit SPIC Heavy Chemicals Chennai Protech Consultants

655 MW CC Power Plant Gujarat Torrent EnergyCorporation Ltd Paguthan Siemens

Energy Optimising Furnace Valve Stand and Gas cleaning Plant Southern Iron and Steel Company Ltd Mettur Tata Korf Engg. Ltd

Ammonia Plant Modernisation and Compressor House DCS Conversion Southern PetrochemicalIndustrial Corpn Ltd Tuticorin SPIC-SMO

Water Circulation System Project Jindal Vijayanagar Steel Limited Bellary MECON

5th Furnace Analyser Project Indian PetrochemicalCorporation Limited MGCC Nagothane Engineers India Limited

Substantial Soda Ash and Ammonium Chloride Project Tuticorin Alkali Chemicals and Fertilizers Ltd Tuticorin SPIC-SMO

Power Plant Extension Unit - 5 Fort George Diesel Power Station Port Louis Mauritius -

6 MW Co-generation Power Project Southern PetrochemicalIndustrial Corpn Ltd Tuticorin SPIC-SMO

CDU III, VDU III, utilities and offsites, SRU, ATU and BBU of Vizag Refinery Expansion Project II Hindustan PetroleumCorporation Limited Visakapatnam Engineers India Limited

Chemical Port Terminal Project Gujarat Chemical Port Terminal Company Ltd Dahej, Gujarat Engineers India Limited

Standby Sulphur Recovery Unit Indian Oil Corpn Ltd Panipat Engineers India Limited

Revamping of ARU Project Indian Oil Corpn Ltd Mathura Engineers India Limited

K.G. Basin Pipeline Projects Gas Authority ofIndia Limited West Godhavari Dist. Andhra Engineers India Limited

Ravva Satellite Gas Development Project – Compressor House Cairn Energy India Pty Limited S. Yanam Andhra Pradesh Clough Engineering Australia

Relocation of Power and Sugar Plant Thiru Arooran Sugars Ltd A. Chittur -

Gas Collection Station Oil & Natural Gas Commission Ltd Ramnad SPIC-SMO

Tankages Project ONGC Rajmundry Thatipaka Engineers India Limited

Balance Of Plant Works for Bio MassBased Co-Generation Power Plant Balarampur Chini MillsLimited Balrampur Avant-Garde

Balance of Plant Works for 40 MWCo-generation Power Plant Supreme Renewable Energy Limited Pennadam Avant-Garde

Instrumentation Works related withPiping Modification at RAVVATerminal Cairn Energy India Pty. Limited Amalapuram John Brown Technologies

D.M.Plant Automation Project National Aluminium Company Limited Angul, Orissa VA Tech Wabag Ltd

LPG Pipe Line Project Gas Authority of IndiaLimited Vizag-Secundrabad Engineers India Limited

Muncipal Solid Waste based Power Plant Asia Bioenergy India Ltd Lucknow Enchem Engineers

ANNEXURE – II

With N.R.C.Engineers (Madras) in the following Instrumentation Projects at Madras Refineries Limited at Madras & Nagappattinam from January 1989 to June 1996.

Project Client Location Consultant

Modernisation of Refinery I –DCSConversion Project Madras Refineries Ltd Madras In House

Oil Movement & Storage Project Madras Refineries Ltd Madras In House

Modernisation of Power Plant- DCSConversion Project Madras Refineries Ltd Madras In House

Feed Preparation Unit Madras Refineries Ltd Madras In House

Additional Tankages System Madras Refineries Ltd Madras In House

Sulphar Recovery Unit Madras Refineries Ltd Madras In House

Fire water Auto Cutin / Cutout Madras Refineries Ltd Madras In House

Lube Pilot Extracion Unit Madras Refineries Ltd Madras In House

Relocation of Flare System Madras Refineries Ltd Madras Engineers India Limited

Solvent Tankages Project Madras Refineries Ltd Madras Engineers India Limited

Cauvery Basin Crude Distillation Unit 0.5 MT Refinery Madras Refineries Ltd Nagapattinam Engineers India Limited

Offsites & Metering Stations of LPGLPG/GSU Recovery Unit Madras Refineries Ltd Nagapattinam Engineers India Limited

Waste Water Treatment Plant Madras Refineries Ltd Nagapattinam Engineers India Limited

Strengthing Of Structurals ofMEK Unit Madras Refineries Ltd Madras Engineers India Limited

Piping Hook-Up Connections forMEK Unit Madras Refineries Ltd Madras Engineers India Limited

ANNEXURE - III

With M/s. ALKAN Engineering (India) Private Limited, Mumbai from February 1977 to December 1988

As an Engineer associated with erection & commissioning of Instrumentation works of

Project Client Location Consultant

Gujarat Olefins Projects consisting Naptha Cracker Unit and BBH Units Indian PetrochemicalCorporation Limited Baroda Engineers India Limited

Ammonia Plant National Fertilizers Ltd Panipat Engineers India Limited

As Resident Engineer in execution of Instrumentation works of

Project Client Location Consultant

Acrolonitrile Plant Indian PetrochemicalCorporation Limited Baroda Engineers India Limited

Chips Plant Petrofils Limited Baroda Engineers India Limited

F.C.C & Aroma Complex PCK, Schwedt East Germany Toyo EngineeringCorporation, Japan

Caustic Soda Expansion - I Gujarat Alkalies &Chemicals Limited Baroda UHDE India Limited

Gas Holder Plant Baroda Muncipal Corporation Baroda UHDE India Limited

Polyester Filament Yarn Reliance Industries Ltd Patalganga Chemtex / Dupont

Sodium Cyanide Plant Gujarat Alkalies &Chemicals Limited Baroda TATA Consulting Engineers

Crude Separation Unit Oil & Natural GasCommission Uran Power Gas / Engineers India Ltd

Caustic Soda Expansion - II Gujarat Alkalies & Chemicals Limited Baroda UHDE India Limited

Vizag Refinery Expansion Project-I Hindustan PetroleumCorporation Limited Visakapatnam Engineers India Limited

Hydrogen Sulphide & Distillation Unit of Heavy Water Plant Khammam ChemicalRefinery Manuguru Engineers India Limited

View contact information...
«« previous resume next resume »»
Search Results (Resumes 7901 to 7950 of 10884)Go to Search Parameters...
Brief Description
B Sc. Chemical engineering • Over 3 years experience including in process development
I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty
I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future
Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas
An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.
More than one and a half year of hands-on experience in Instrumentation and Project and Sales.
Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering
I'm a geophysicist.
Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.
Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East
Senior piping designer
Turbine tech.
Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.
It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.
B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.
I can work floors, motors, and derricks.
I have a very strong back and am not affraid of hard work. I am very punctal
Geology, To be graduated.
BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers
chemist, AUC english course, computer course, 2008 graduation
I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.
BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.
Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.
More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects
Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.
Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant
Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)
Skills: semi skilled fitter & turner, horizontal boring mill, veritcal borer, central lathe, fitter, oilmaker, piefitter, milling machine. I will be finishing my N2 early March to be qualified.
I am very much interested in Oil Gas Exploration.
I've studied chemical Engineering. I passed some curses in drilling fluids, well log, zagros formation studies, and also water treatment
I am a female geologist who is currently doing my masters in geology. I finished from the University of Port harcourt, rivers state In Nigeria. I am a team player and still able to work independently with minimum supervision.
More than three (3) years experience in Mechanical Engineering in offshore/ onshore Oil and Gas Production.Application of Incident and Injury free approach in project, HAZOP study in project.
Chartered Accountant with three years experience in Oil and Gas Industry
I would like to work with a company that is well established and stable.. I enjoy working in the Oil & Gas Industry because of the people I have meet and worked with...I want to learn more about different aspects of the Industry and look forward to moving up with a good company.
8+ years in the field of Cost Analysis (Estimation & Cost Control Function) for Refineries, Petrochemical Complexes, Oil & Gas Pipelines / Terminals and Fertilizer Projects
I work at present servicing a fuel storage depot as a Maintenance Electrician, Leading Hand. I have 6 years experience of this type of work and many specialised qualifications in this area.
Situations that may be transformed to improve define the main objective of my professional profile, problems that demand critical analysis, evaluation of variables, and proposition of novel solution strategies to overcome them. I am much motivated, well prepared, and ready to learn more everyday.
Mechanical engineer B.Tech. 6 yrs experience.(UAE) exp in dealing with contractors, sub contractors etc , contacts with major oil companies like adco,etc in UAE, excellent knowledge of UAE market .
can apply any job which you think I am fitting for
I am looking for a job in Oil Industry. I'm willing to "Hard work" and work with "Any entry level position" with your concern. I certainly would appreciate it very much if you could give me an opportunity in your company. I am confident of doing a good Job with your concern.
B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.
Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications
I m Final Year Student of Mechanical Engineer and will be pass out upto december 2006. I want utilize my knowledge and skills for an organization, which offers opportunities for personal growth and career development.
Icorr paint inspector/rope access technician
Experice engineer with project engineering and project managemnt
Mechanical Engineer
working in Ras gas - qatar as an instrument technician with 14 years experience. good knowledge in process instrumentation. good experience in yokagawa CS3000 and Foxboro I/A series Dcs. having diploma in electronics and telecommunication. pls see attached resumes for more details.
To continue employment in the field of oil & gas operations. I will bring dedication, good work ethics, and teamwork to your company.
Hard Working, faster to learn, Capable to working by individually or as a team and Capable to working in any different area
All qualifiations are posted on my resume exept that i have a passport.
First   Prev   151   152   153   154   155   156   157   158   [ 159 ]   160   161   162   163   164   165   166   167   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com