Resume - Project Engineer :Responsible for execution of assigned projects from proposal t...

Misco Jobs

Resume #13937

CONTACT INFORMATION:
View contact information...

Education:

1993: Master Degree in Mechanical Engineering.
Name of Thesis: Integral Prediction Method For Turbulent Boundary
Layer Using Entrainment Technique.
Faculty of Engineering,
Zagazig University, Egypt.

1982: B. Sc. in Mechanical Power.
Faculty of Engineering,
Zagazig University, Egypt.

Computer Knowledge:

- Ms Project.
- Operating IBM Computers using different design applications, as well as MS
Office software
- Calculation with mechanical software.
- HVAC Calculation by using Carrier, LG, & AL- Zamil Software.
Classification: Project Engineer

Duties & Responsibilities

- Responsible for execution of assigned projects from proposal to Project Manager completion.
- Responsible for ensuring that the package for submittal to the client meets all client requirements. Checks that all client comments have been incorporated. The PM assures that the package has been through all relevant checks in line with the QA/QC manual.
- Prepares and coordinates the project schedule and maintains this throughout the project. Optimizes the use of personnel to achieve the schedule. Forecasts and addresses deviations to schedule.
- Responsible for the total administration of the project in line with procedures. Attends and minutes all project meetings. Maintains project master files. Handles all project communication with the clients.
- Prepares/compiles Project Co-ordination Procedure (PCP). Assures efficient dissemination of data to the project team and assists the lead discipline engineers with co-ordination. Co-ordinates staffing of the project with the Design Manager.
- Prepares all project reports required, internally and externally, with the assistance of Project Support Services where required.
- Responsible for assuring that all of the Project Team are familiar with the scope of the project.
- Responsible for assuring that all scope changes are maintained on a trend log and are promptly transmitted to the client for resolution.
- Prepares/compiles technical proposal bidding purposes.
- Contacts:
Reporting: To the Engineering & Project Department (EPD)
Manager.
Internal - regularly with EPD Manager, Design Manager, Project Managers and Lead Discipline Engineer
External - with client (SAUDI ARAMCO, SABIC (IBN RUSHD), ROYAL COMMISSION ).
Major Projects:

- Sulfur Recovery Upgrade at Shedgum & Uthmaniyah Gas Plant (SAUDI ARMCO)
- Cogeneration Interface Project UGP, SGP, JGP.(SAUDI ARMCO)
- Ras Tanura Refinery Wasterwater Recovery. (SAUDI ARMCO)
- Treatment Plant Project, Juaumah Gas Plant. (SAUDI ARMCO)
- Modification and upgrade the emergency area in Ras-Tanura medical center. (SAUDI ARMCO)
- Utility upgrade in U.S. consulate.
- IBN RUSHD ( Propane & Butane Feed Pipelines).(SABIC)
- Complete detail design of industrial factories such as: AL-RUSHAID OILFIELD CENTER, SAUDI TRANSFORMER CO., AL-RASHED STEEL FACTORY,AL-RASHED FASTENER FACTORY.

- Design projects (HVAC& Utilities) in the commercial & residential field such as multi story buildings, and malls.

- Construction projects for the Egyptian Petroleum Company.

- Maintenance projects for the Golden Farm (food processing plant) and airports

Experience:

1 May.2003 Up to now: Company Name:
- SOFCON Consulting Engineer Co.
Al-Khobar - Saudi Arabia
Position Held:
Project Engineer
Major Projects:
1- SAUDI ARMCO:
- Sulfur Recovery Upgrade at Shedgum & Uthmaniyah Gas Plant (SAUDI ARMCO)
- Cogeneration Interface Project UGP, SGP, JGP.(SAUDI ARMCO)
- Ras Tanura Refinery Wasterwater Recovery. (SAUDI ARMCO)
- Treatment Plant Project, Juaumah Gas Plant. (SAUDI ARMCO)
- Modification and upgrade the emergency area in Ras-Tanura medical center. (SAUDI ARMCO)
2- IBN RUSHD
- IBN RUSHD ( Propane & Butane Feed Pipelines).(SABIC)

1 Feb. 2001 to 30 April 2003: Company Name:
Nassir Mulhim - Consultants Engineers Al-Khobar - Saudi Arabia
Position Held:
Supervisor Mechanical Engineer
Responsibilities:
- Planning, Designing and scheduling of work activities
(Piping, Utilities & HVAC)
- Coordination With The Client¡¦s
- Piping Design Engineer In Various Aspects Of
Industrial And Commercial Projects
- Design & Supervisor of all Air Conditioning System for
Industrial, Commercial & Residential Projects

Major Projects
A Industrial
- Weatherford AL-Rushaid. (Factory & office)
- Baker Hughes AL-Rushaid. (Factory & office)
- Saudi Transformer Co. (factory & office)
- Fasteners AL-Rashed. (Factory & office)
B Residential Building:
- Saad AL Hussan Compound (Fifty Villa)
- Khalid & Khalefa AL Mulhim (Six Building)
- 3-AL-Mutlaq

1 Aug. 1998 - 1 Jan.2001: Company Name:
- Petroleum Projects & Technical Consultation Co. (Petrojet)
Cairo - Egypt
Position Held:
- Supervisor Mechanical Engineer.
Development of new production lines for Egyptian Petroleum Company, Alexandria.
Responsibilities:
- Piping Installation, including:
- Preparation fabrication drawings.
- Working as field engineer to prepare modification on site as required modify piping route.
- Taking decision for material substitutions at site
- Supervising mechanical completion stage including bunch list of piping system, hydrostatic testing, reinstatement and commissioning of piping system.
- Applying and controlling welding and safety procedures.
- Verifying material description

8 Oct. 1995-25 Jun. 1998: Company Name:
- Consulting & Design Engineering ( C. D. E. )
Al-Khobar - Saudi Arabia
Position Held:
- ENGINEER-1 (Mechanical / Piping)
- Purpose: Analysis And Design Piping Project

Responsibilities:
- Coordination With The Client's Engineers.
- Piping Design Engineer In Various Aspects Of
Industrial Petrochemical And Commercial Projects
Involved in various Saudi Aramco projects:

- Riyadh Oil Refinery Drawing Integration Project.
- Refinery & Upgrade Drainage Sumps, Ras-Tanura. (Phase 1, 2 & 3)
- Modification & Upgrade of Emergency Area in Ras-Tanura Medical Center.
- Appraisal & Engineering Services for Utility Upgrade in U.S. Consulate.

1 Feb. 1994 - 12 Seep 1995: Company Name:
- Petroleum Projects & Technical Consultation Co. (Petrojet)
Cairo - Egypt

Position Held:
- Supervisor Mechanical Engineer.
- Worked in several projects undertaken by Project in Egypt.
- LPG, Alexandria.
Responsibilities:
- Piping Fabrication and Installation, including:
- Preparation fabrication drawings.
- Working as field engineer to prepare modification on site as required modify piping route.
- Taking decision for material substitutions at site
- Supervising mechanical completion stage including bunch list of piping system, hydrostatic testing, reinstatement and commissioning of piping system.
- Applying and controlling welding and safety procedures.
- Verifying material description
12 Jul. 1988 -17 Jan. 1994: Company Name
- The Egyptian General Organization for Civil Aviation.
Position Held:
- Operational Engineer.
Responsibilities:
- Supervising Maintenance & Operations of Airport Equipment (Generators, Pumps, Compressors, Fire protection equipment, etc.)

9 Oct.1984 - 11 Jul.1988: Company Name:
- Golden Farm Co.
Cairo - Egypt
Golden Farm is the largest food processing company in Egypt. Its main activity is production and packaging of dairy products. It is also specialized in packaging of dry products, i.e.. Spices, legumes, etc.
Position Held:
- Maintenance Engineer
Responsibilities:
- Maintenance works for factory equipment: Power plant, Water plant, packing machines, pumps & Air Condition.
- Supervising spare parts manufactured at external workshop.
- Participating in studying company's projects
- Supervising the operation of new production lines
- Supervising maintenance control & preventive maintenance.

Training Courses:

7 May 1994 - 11 May 1994: Corrosion and Painting of Steel
Port Training Center
Arab Maritime Transport Academy
Alexandria - Egypt

1 Jan. 1990 - 12 Jan.1990: Industrial Safety and Health
Cairo Airport Training Center
Cairo - Egypt

26 Nov.1988-22 Feb. 1989: Airport Electro-Mechanics
Civil Aviation Training Institute.
(A joint A.R.E. ICAO Project.),
Cairo - Egypt.

Jan.1987 - May 1987: Maintenance Control and Preventive Maintenance
The Engineering & Industrial Design Development Center.
Ministry of Industry,
Cairo, Egypt.

23 Feb.1986 - 06 Mar.1986: Welding Technology And Application
Engineering & Industrial Design Development Center.
Ministry of Industry.
Cairo - Egypt.
16 Dec. 1984- 22 Dec. 1984: International Seminar: Computers Application in Management
University of Patras, Greece.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3751 to 3800 of 9785)

Go to Search Parameters...

Brief Description

I have passed bachelor"s degree& have 11 years working experience of utilities operation in oil and gas refinery ,petrochemical and polyester plants.

I posses more than 10 years of experience in Projects Planning, Scheduling, Monitoring and Control in India and abroad on assignments in USA.

Drilling supervision and engineering, well control instructor, rig commessioning

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

An experienced and highly skilled Project Manager with over 10 years of practical experience working in the Project Management field for organizations in the government and the private sectors.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

Geophysicist/Geologist/Seismologist/Volcanologist

A B.E. Chemical Engineer with broad ranging experience in Health, Safety & Environment (HSE) in oil and gas sector. proven results to minimize the risk and injury to personnel, protect company’s assets as reasonably and as practically possible.

•A professional with excellent communication, organizational, and administrative skills. •A team player capable of motivating others offering more than 10 years of progressive experience.

Environmental or HSE Manager with 13 years industry experience, the past 7 of which have been focused on EMS and HSE-MS for the upstream oil & gas industry. Worked in Australia, Middle East, Sth Europe, West Africa & Russia.

M. Sc. Geophysicist/Geologist

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.

OBJECTIVE To obtain a management position at an industry-leading company

•10 Years of Experience as Maintenance and Reliability Engineer •Certified Reliability Engineer by ASQ •Certified in NDT by the ASTM •Taught more than 20 courses associated to maintenance and reliability methodologies, training over 300 professionals. •ASQ Member •ASME Member

I HV WORKED AT LPG. SRU. TANK FORM . AMIN UNIT .

Working in Oil industries since 8 years i have worked to many multi national oil companies etc BP, OMV, OPI, Total, OXY, Nexen and Power Plants as HSE Representative.

I have a diploma in computer application and good knowledge in Document controlling with more than 45WPM typing speed, good command and MS-Office, ability to draft letters, memo independently

Have a working experience of 15 years in the Financial Sector and worked in good financial institutions such as Citibank, Credit Agricole, Bear Stearns and MashreqBank. I am a Certified Internal Auditor and a Certified Fraud Examiner.

Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.

Operaton experience in combined cycle power plant (GE 6 FA, 9FA, siemens V94.2 turbnes)

Industrial, commercial electrician. Licensed Master Electrician - Colorado Licensed Journeyman Electrician - Alaska

TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET

Welding Inspector

:Onshore as Asst. Production Operator for Occidental Of Oman through The Oman Construction Company (TOCO)

Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.

Certificate in Petronas Apprenticeship Scheme

I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.

Master in Industrial Engineering (With 3.86/4 CGPAand BE in Mechanical engineering(With Honours) with adequate knowledge of computer including (MS Ooffice, autocad 200) and good communication skills.

process operator/control room operator

Division Director / Business Development / Oil & Gas Industry

Project Management

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba

Licensed Journeyman welder, Interprovincial Red Seal attained. Alberta B Pressure WCB registered F3/F4 qualified, 4-position flux core (Flat, vertical, horizontal, ovehead), CSTS

SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.

6 years experience to work with large data base, to consolidate the information in useful reports necessary to Group Procurement for the activities of scheduling; management of suppliers and their performances, strategic sources

Senior Piping Designer PDS

Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.

Internationally experienced purchasing manager with experience managing an office that supports multiple sites. Experience with exporting goods to most countries in South America. Excellent people skills.

Rig mechanic, mechanic supervisor, motorman, diesel mechanic

Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer

Mechanical Maintenance Engineer/contract and Procurement Engineer

Professional Project Manager, PMP certification, More than 15 years of domestic and international oil & gas industry experience

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

Registered Mechanical Engineer Cert. No.61058,CSWIP 3.1 Cert. No.35530

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 [ 76 ] 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out