Resume - PhD degree in the field of Industrial Engineering. Experience in the management ...

Misco Jobs

Resume #14438

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
July 2004:Process monitoring
Name and address of employer: SAT spa Catania-Italy
Type of business or sector: Research and development
Occupation or position held: Consultant
Main activities and responsibilities: Set up of on-line system for signal analysis and processing. Development of hardware and software platform

July – December 2001: Research staff
Name and address of employer: University of Padova - Italy
Type of business or sector: Research
Occupation or position held: Collaborator
Main activities and responsibilities: Collaborator at University of Padua of research project "MERLOT" for the calibration of 2D and 3D Fem codes for the simulation of thermo-mechanical operation in hot forging processes

EDUCATION AND TRAINING
2002 - today: Attending the 3rd year of Ph.D. course in Industrial Engineering
Name and type of organization providing education and training: Dept. Of Innovation and Management – University of Padua, Italy
Principal subjects/occupational skills covered: Influence of machine tools stiffness in forging processes
Title of qualification awarded: Ph.D. degree

October 1995 – July 2001: Ms.C. degree In Mechanical Engineering
Name and type of organization providing education and training: University of Padua, Italy
Principal subjects/occupational skills covered: Title of Ms.C. thesis: "Numerical and experimental analysis of flowforming process for the production of aluminium car wheels"
Title of qualification awarded: Engineer

PERSONAL SKILLS AND COMPETENCES

MOTHER TONGUE: Italian

OTHER LANGUAGES
English
Reading skills: Excellent
Writing skills: Good
Verbal skills: Good

ORGANIZATIONAL SKILLS AND COMPETENCES
Responsible at University of Padua for the following projects:
–International research project "IMPRESS" (GROWTH) for the experimental and numerical characterization of dynamic behaviour of machine tools during deformation processes,
–National research project "SAT" for the optimization of shearing process using experimental and numerical techniques,

Collaborator at University of Padua for the following research projects:
–Project "TPAPlast" for the monitoring and the optimization of injection moulding process,
–Project "DECOFOR", in collaboration with Tekfor S.p.a., for the characterization of the dynamic behaviour of mechanical and hydraulic presses

COURSES AND EXPERIENCES
2004 September-December: "4th International Training on Precision Forging" at NICHIDAI CO. (Japan) and Osaka University (Japan) for the development of cold forging processes of magnesium and aluminium alloys
May 2004: Permanence at ISKRA (Slo) for the characterization of mechanical press behaviour in cold forging processes
May 2003: Labview® training course for signal analysis and processing
November 2002: "Photostress analysis techniques" course at Luchsinger Co.
May 2002: Permanence at Denmark Technical University for the design of stiffness transducers for the measurement of dynamic press stiffness

TECHNICAL SKILLS AND COMPETENCES

CAD: Programs (AutoCAD, Pro-Engineer, Solid Edge) For 3D Modelling
Fem: Structural Codes (Ansys, Promechanica), Plastic Deformation Processes (Forge2, Forge3), Injection Moulding (Moldflow)
Data Monitoring And Analysis: Labview, Matlab
Graphics: Corel Draw, Macromedia Fireworks
Microsoft: Excel, Access, Front Page, Outlook, Publisher

Co-Supervisor Of 14 M.Sc. Theses Since 2001 At Dept. Of Innovation And Management – University Of Padua

PUBLICATIONS
Bariani P.F., Berti G., Dal Negro T., Ghiotti A., Analysis Of The Dynamic Behaviour Of A Flywheel Screw Press, 7th Ictp Conference 2002 – Yokohama.

Bariani P.F., Ghiotti A., Development Of Loading Devices To Evaluate The Stiffness Of Forging Presses In Realistic Operating Conditions, 6th A.I.Te.M. International Conference 2003 – Cassino.

Bariani P.F., Ghiotti A., Evaluating the press stiffness in realistic operating conditions, 8th ESAFORM Conference, Cluj-Napoca (Ro), 2005 - Accepted

MEMBERSHIP
Member of Associazione Italiana Di Tecnologia Meccanica (Aitem)

INTERSESTS
Running, riding, sailing, reading.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9551 to 9600 of 9785)

Go to Search Parameters...

Brief Description

Senior Geologist with 9 years experience in many categories of geology( oil, mining & water ), graduated at May1999 (Geology-Chemistry), Faculty of Science, Cairo University, then high studies at 2001 (Sedimentology), Faculty of Science, Cairo University-Egypt, and high studies at 2004 ( Geophysics,

I am looking job in Australia, Canada & UK. I have 8 years experience in Administration Department. I can run an organization Individually.

I hold a Bachelor degree in commerce. Beside my sound academic record I have a diploma in business electronics data processing and currently pursuing Masters in Financial Management.

B.Tech (Electrical and Electronics)

7 years of work experiences in Asia, in building and civil construction fields. Expertise in project management and formwork design. Graduated with Master in Civil Engineering (project management) and MBA from top schools in USA and Germany.

Civil Designer/Drafter

Seeking a challenging position in the field of Geology GIS, Remote Sensing, and Image Processing

Journeyman electrician, field camp experience, supervisory experience, controls experience, cleared

I 'm an active, hardworking, creative and supportive person with the capability of working in a team with different types of background and being a leader of a group in various field of work

SAP, Business Analysis, ERP, Project Management tools, Full life cycle implementation, Reporting tools, Documentation, End User Training

Seismic Processing Geophysicist

6 years of Network Administration and Operations Management

I am student Engineering of last semester in the University of America. I want to work in anyone place in the world. My average of qualifications is more or less 3,8 in a scale of 1 to 5.

JNCC accredited marine mammal observer graduated with a first class BSc(hons) Conservation Biology and Ecology. Experience in marine mammal research and observation and extensive experience of report writing. Very competent, diplomatic and assertive with a passion for marine mammals.

Pump Man

Instrumentation technician, control systems engineer, mining technologist

I am a mechanical engineer, looking for an entry/Junior level career opportunity in the oil and gas sector. I graduated with high honors from tha American university in Cairo, and i am specialized in design and industrial engineering. I am now training as a piping engineer with CCIC, Qatar.

Electronics Communications Engineer

• Thorough understanding of test methodologies and procedure in working as a Production Engineer

ý•ý Based on my research experience where my main skills are reading and using all new ýinformation and programs in computer filed.ý

Having worked for federal and state agencies throughout college, I developed in-depth knowledge of environmental and geophysical techniques and methodologies.

Electrical control Engineer

Perform duties in the field of pipe fitter such as offset and rolling offset.

Experienced Executive Recruiter currently in the process of becoming a certified oil & gas landman. Open to opportunities anywhere in the U.S. (especially interested in LA, MS, & TX). Will also consider relocating overseas for an incredible opportunity.

Experience in Electrical Maintenance, Software Development and Teaching.

Logistics Warehouseman

PhD degree in the field of Industrial Engineering. Experience in the management of international EU research projects.

Financial and Commercial Administrator

Experienced, highly skilled, hands-on professional with superior interpersonal and communication skills seeking a long-term position which will make use of his laboratory, refinery processing and manamgent background.

Sales, marketing, advertising and merchandising, administrative support for major projects, Strong analytical and organizational skills, excellent MS Office skills (MS Word, Excel, PowerPoint, etc)

Class 3 Licence Operator with Airbreak Endorsement, safety certificates, experience in Oil Field and Construction Equipment.

Shotfirer / Blaster. 4 years experience in open cut coal mines. Queensland Shotfirer ticket, S1, S2 & S3. Generic industaion. SSAN clearance

2D/3D Mechanical design and drawing, PLC and Mechatronic, Pneumatic and Hydraulic, Maintenance, Well Planning, Fabrication, Basic knowledge gas engine, Pumps, compressor, refrigerant, combustion engine, piping analysis, Computer software (Ms Office, SPSS, Flash MX, AutoCAD, SAP 2000 V8, Pro-eng, AMD

MSc Applied Geology with specialization in RS and GIS Plus 2 Computer Diplomas of 1 yr duration each.

I have experience in researching well and lease records for petroleum prospect mapping and in well site services/ mud logging.

~Completion of Technical Studies prescribed by the Alberta Apprenticeship and Industry Trainning in the trade of WELDER ~Journeyman to "B" pressure WLD 227 taken @ N.A.I.T

Registered as Professional Civil engineer 2124-11 in Engineers Australia

I have a surveying degree from the University of Otago and 2 years post graduate experience in surveying.

CPR certified, type 50-60 wpm

Over 20 years experience providing quality customer service. Excellent organizational skills, ability to follow through on multiple tasks and meet deadlines. Dependable, goal oriented, and a team player. Demonstrate readiness to accept new challenges.

Multilingual (English, French, Arabic and Portuguese), computer skills include Word, Excel and PowerPoint, web research, familiarity with the metals markets both precious and base, ability to multi-task/work under pressure and tight deadlines, widely travelled, writing and speech skills (scientific

Mechanical Engineer (B.Sc. - Istanbul Technical University - ABET accredited university), Strong command of English, Occupational Safety and Health engineer, Pipeline engineer, Member of ASME, National & International work experience, Good communication & social skills, Result oriented work approach

Finish all my subjects of the Career of OIL ENGINEERING, in the Autonomous University Gabriel René Moreno (U.A.G.R.M), counting at the moment with the Title in National Provision, and got the title of Environment Fiscal and Advisor Under norms SO 9000, ISO 14000, OHSAS 1800 SA 8000, and Consultants

B.E(Electrical Power) Engineering, A good skill in production and maintenance of electric transformers and consultant on Quality Management System(ISO 9001)

Sales, Customer Service, Accounting and Administration with 6 years of experience in Multinational Companies, Banks & Large Organizations in INDIA and ABROAD.

Strong organisational and administrative skills from roles such as project management, technical author and other IT related positions as well as administration and office management positions encompassing such duties as provision of one-to-one training, software support and documentation creation.

Experienced mining engineer, mine layout and design, design and scheduling of waste stockpiles, roads and utility planning, drill and blast layouts, scheduling, short term planning and project work

have more than 5 years of extensive experience in Multinational Manufacturing for German and Japaneses Companies and construction company where I have been currently employed here in UAE. Relative to acquired skills of SAP and Platinum. Focusing on Budget, Financial Statement Preparation

Just graduating with a B.S. in Geology. My degree includes a large portion of field work, including: vibracoring modern sedimentary environments (St. Croix, U.S.V.I); studing deformation of the Cumberland Overthrust; hydrology work. I am a quick learner and hard worker.

Field service engineer (diesel gensets)

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 [ 192 ] 193 194 195 196 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out