Resume - IIT Graduate - SAP Implementation Exp

Misco Jobs

Resume #14539

CONTACT INFORMATION:
View contact information...

Objective: A highly motivated individual, possessing sound knowledge of ERP systems and processes, in addition to excellent communicational, interpersonal and analytical skills, seeking a challenging position where these skills will be fully utilized and further developed.

Work Experience:
----------------
1.Company: Steel Corporation of Gujarat Ltd. – A Joint venture of STEMCOR and ESSAR Steel Ltd for setting up a Cold Rolling Plant at Hazira, Surat.
Job Profile: Engineer (Level M10) Production Planning and MIS,
* Working as a member of SAP implementation team, Involved in User Requirements, Process Design, CRP Testing, QAS Run and Live Run of different modules,
* Involved in development and implementation of planning and scheduling systems for production planning,
* Developed formats for different Management Information System (MIS) Reports,
* Did analysis for material design for different CR and galvanized products.
* Performed extensive troubleshooting activities for the smooth flow of production planning process during the initial part of implementation.
Period: May 2003 - Till Date

2.Company: ESSAR Constructions Ltd. – The construction division of 20,000 Cr Essar group, is one of India's leading engineering, procurement and construction (EPC) contractors.
Job Profile: Graduate Engineer Trainee,
* Involved in SAP's Project Module for Project Planning of upcoming Cold Rolling Complex,
* Involved in preparing a Detailed Feasibility Report for the 1.0 MTPA Cold Rolling Complex,
Period: January 2003 - April 2003

3.Company: TEXMACO Limited, Calcutta. - A KK Birla group company, involved in manufacturing of railway wagons and boilers.
Job Profile: Summer Trainee,
* A brief overview of activities at different departments like machine shop, Assembly Lines, PPC and IED,
Period: May 2001 – June 2001

Summary: Right from the start of my career, I was a part of such a large core-sector project (1.3 MTPA Cold Rolling Mill Complex). The exposure is very wide- I've had the opportunity to get involved in a variety of assignments, from dealing with shop floor issues to SAP implementation. Primarily I've been involved in the system development activities for the CRM Complex. Essar Information Technology Ltd. (EITL) is implementing the system (ERP and MES) and I am responsible for the co-ordination from the user's side. This involves various sessions with EITL and other concerned departments for requirements finalization, design, testing and fine-tuning of the system. All this experience has given me good functional knowledge of Production Planning Module of SAP and a proven ability to get the job done.

Trainings / Seminars Attended During Job

* Effective Supply Chain Management – by Mr. G Palekar – 2 days
* Production Planning and Control – by Dr P K De – 3 days
* Corporate Executive Program – by Faculty Members from Art of Living – 4 days
* Organization transformation through Six-Sigma – Confederation of Indian Industry (CII) – 2 days

Education:
----------
B Tech – Industrial Engg - IIT Kharagpur 2002 - CGPA: 7.7 /10

* Core Industrial Engineering Courses:
Logistics, Operations Research, Work System Design, Facility Layout Design, Production Design and Process Planning, Quality Control / Quality Engineering, Management of Inventory Systems, Reliability Maintainability and Safety.
* Systems:
Analysis and Design of Information Systems, Networks and Project Management, Software Project Management, Simulation
* Marketing and Strategy:
Marketing Management, Demand Analysis & Forecasting, Management and Productivity.
* Projects:
Final year dissertation: Development of a MATLAB toolbox for Design of Experiments
Design and Development of IEM Department Website as part of the ADIS project in fourth year.
Development of a Database Information system for KAT (Krishna Air Travels), a courier and Taxi operator and Travel agent in fourth year.
A field project on Marketing of Services like Transportation and Courier in and around Kharagpur as part of the Marketing Management course in fourth year.
Development of a C++ program for Assembly line balancing using Genetic Algorithm, in third year.

* Seminars given
Optimization of product mix of HSM (Hot Strip Mill) at TISCO (Topic Seminar Fourth year)
Effect of In-Process Inventory on an Assembly Line (Third year)

XII - GIC Bijnor–UP Board 1997 - 82.8 %

X - LDAVIC Anupshahr–UP Board 1995 - 79.6 %

Computer Skills:
* Languages
Java, C, HTML, SQL
* Packages
SAP R/3, MS Word, MS Excel, MS Power Point, IMPS (Integrated Marketing and Production System – Internal System of Essar Steel), MATLAB
* Operating Systems
Windows 98/2000/XP

Academic Accolades:
* Ranked in top 1% in the fiercely competitive IIT-JEE (number of students appearing ~ 0.15 millions)
* 21st position in XII state board merit list

Extra Curricular Activities:
* Sub-Head, Fine Frenzy Team, Spring Fest 2000 (inter-collegiate festival of IIT Kharagpur).
* Sub-Head, Work-Shop Team, IDEON 2000 (inter-collegiate technical festival of IIT Kharagpur)
* Mess Secretary of RK hall (1999-2000)
* Captain of Gold winning Dramatics Team of RK hall (2001-2002)
* Participation in sports (Cricket, Water Polo, Hockey, Football, etc.) & Soc-Cult (Choreography, Dramatics) events.
* Best Shooter at NCC Winter Camp at Kalaikunda Air-force base

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9051 to 9100 of 9785)

Go to Search Parameters...

Brief Description

Experience: Planning RC & DD drilling - Logging / Surveying & GIS / Sampling / Data modeling. Positions: Offshore geologist / field geologist / Project kimberlite geologist (Namibia & Angola).

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

3 Years of experience in Substation Automation field. Worked with Areva, ABB, Siemens & GE systems.

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

E&I Materials Coordinator

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Operations, Technical, Leadership, Surface, Underground, & International Experience

analyst

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

SR HR Executive

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

Worked in chemical Industry for 14 years.

P&PCM, MBA, B.Arch

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

I am an Instrumentation Technician and Instrument/gas fitter with oil,gas, and industrial experience. Skills: AC/DC generator, chemical injection, I&C, PLC, panel tech, compressor, automation, integration, etc.

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

I am qualified as an operator for monitoring pressure, flow, temperature, gas, and liquid pipeline operations including pipeline, wells, refineries, and plants.

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

IIT Graduate - SAP Implementation Exp - 2 yrs

Piping, PDS, PDMS, PSDS Designer Over 9 years experience in the field of Mechanical, Piping Engineering Design / Drafting and Construction. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.

Operations Supervisor

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

MSHA Certified, 5+ years construction trade experience, experienced heavy equipment operator, bilingual (spanish/english)

Skilled Communicator Seeks Marketing and Business Development Position

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Electration Engineer Trainee

Contract Administrator, Paralegal-PC/Microsoft Proficient

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

A dynamic professional with over 10 year of experience in Project Planning, Cost Control, Estimation, Quantity Surveying, Co-ordination and execution of MEI&P Projects. Proficient in Primavera Project Planner V3.1 & 6.0, Office XP/2000 and In-house soft wares for Client / Sub-contractor Billing

Electrical Engineer

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

MBA, experience in Clients relations and mutual fund industry.

Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.

Management Graduate with Bachelors in mining engineering, excellent knowledge of SAP, Internet, Microsoft office etc. Sales in Oil and Gas, Energy sector, Training Expert. Good experience of handling people.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 [ 182 ] 183 184 185 186 187 188 189 190 191 192 193 194 195 196 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out