Resume - B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EM...

Misco Jobs

Resume #14548

CONTACT INFORMATION:
View contact information...

Date of Birth 22nd November 1949

Length of Experience 30 years plus
Driving Licence Valid Omani and Indian LMV

Qualifications B.Sc. Metallurgical Engineering – 1973
(Banaras Hindu University – India)
Chartered Engineer (India)

Training and IRCA Registered Lead QMS Auditor (A011794)
Professional Certified Quality Manager (IIQM)
Accreditation Fellow – Institution of Engineers (India)
Member – Institute of Welding (India)
Member – Society of Non Destructive Testing (India)
ISO 9001 – 2000 Transition Auditor course
Internal Software Quality Auditor course
Environmental Management System ISO 14001 Lead Auditor training course
Six Sigma Break Through Approach course
Planning, Implementation & Documentation for ISO 9001 – 2000 course

Language Bengali (Native), English, Hindi

Experience a. Summary
* Consultancy in ISO 9001-2000 (QMS) and ISO 14000 (EMS). [From 2002 3rd quarter till November 2003).
* Company specialist in all matters relating to quality management, quality assurance and quality control in Petroleum Development Oman (PDO), Sultanate of Oman.
* Company adviser in the applications of quality management system on all PDO engineering and construction projects and vendors' supplies.
* Lead, participate in formal quality management audits and manage corporate quality audit programme in PDO.
* Discipline custodian for quality management, quality assurance, quality control, and welding and non-destructive examination areas in PDO.
* Participation in PDO's HSE audits as per Company HSE manual and standards.
* Development of project quality system to ISO 9000 and its implementation.
* External quality audits – vendors and contractors – system and compliance.
* Internal quality audits.
* Training in quality management and quality assurance system and technical subjects.
* Certification and system hand over dossier / package.
* Suppliers and contractors interview, assessment, evaluation and final selection.
* Evaluation, review and approval of vendors' and contractors' quality system documentation, quality control and inspection plans. Assisting other disciplines in this exercise.
* Review and approval of welding, NDE, heat treatment and painting procedures.
* Preparation and finalisation of technical specifications and statement of requirements.
* Fabrication and assembly work supervision on production floor.

b. Details
A. UK Based EPC Company located in Middle East operating in Hydrocarbon Industry (October 2004 till date)
* Working as Lead Quality for the Project which Company is executing in CIS state as Engineering and Procurement contractor. The project value is in excess of USD 500 million.
* Responsibilities include quality assurance of project activities, quality control and inspection management of project procurement, vendor assessment, inspection coordination supervision, liaison with Client, audits and quality surveillance.

B. PT PEC TECH INDONESIA, Jakarta (December 2003 till September 2004)
* As Deputy QA / QC Manager (Head of Quality Dept.) for LNG project at Bontang executed for and on behalf of Pacific Oil & Gas Company, part of RGMI group of Company.
* Responsible for management of all quality related matter and issues, quality management system, quality assurance and inspection through Pre-Feed, Feed till plant commissioning.

C. PETROLEUM DEVELOPMENT OF OMAN, Sultanate of Oman (1998 to 2002)
* As Deputy Head and Lead Quality Engineer – Quality Management Services department.
* Company specialist in all matters relating to quality management, quality assurance and quality control activities of oil and gas producing Asset teams.
* Company adviser in the applications of quality management system on engineering and construction projects and vendors' supplies.
* Lead, participate in formal quality management audits and manage corporate quality audit programme.
* Discipline custodian for quality management, quality assurance, quality control, and welding and non-destructive examination areas.
* External quality audits – vendors and contractors – system and compliance.
* To ensure Company construction and services contractors quality management system and quality arrangements meet requirements and system implemented and being effective.
* Supervise and manage quality assurance and quality control surveillance activities in all Oil and Gas Asset teams.
* Suppliers and contractors interview, assessment, evaluation and final selection.
* Identification and application of performance indicators and benchmarking to measure the quality and (cost) effectiveness of services and maintain continual improvement process.
* Provide training on quality management, quality assurance and technical areas.

D. CHIYODA CORPORATION, Yokohama, Japan / CHIYODA PETROSTAR LIMITED, Saudi Arabia (1992 – 1997)
* As Senior Quality Assurance Engineer.
* Associated with ADGAS Third Liquid Natural Gas Train project at Das Island, under project management of Abu Dhabi National Oil Company (ADNOC), UAE. Was responsible for:-
review, development and implementation of project quality plan;
project quality system procedures;
external quality audits of vendors and contractors;
internal quality audits;
pre-award QA interviews of vendors;
assisting project team in vendors and contractors' assessment and selection;
monitoring and surveillance of project quality system implementation and compliance;
participation in quality meeting with Client;
assisting projects disciplines in quality issues and technical issues in welding, painting, NDE, etc.;
assisting Project QA Manager in implementing and maintaining an effective Project quality system to ISO 9001. Project completed and commissioned;
provide training on quality management and quality assurance;
* Was engaged in the development of quality management procedures for corporate ISO 9001 accreditation and projects' quality assurance plans for bid proposals and projects under award. Chiyoda Corporation obtained accreditation in 1994.
* Assigned to General Utilities Plant Expansion project of ADNOC, UAE at Ruwais. Client specified SHELL DEP specifications for the project. Responsibilities included:-
development and implementation of project quality system procedures for main office in Japan and site office;
external quality audits of vendors and contractors and internal quality audits;
QA surveillance of vendors and contractors;
co-ordination with third party auditor;
vendors and contractor's quality documentation review and evaluation;
assisting projects disciplines in quality issues and technical issues in welding, painting, NDE, etc.;
quality meetings with Client;
provide training on quality management and quality assurance;
assisting Project QA Manager in implementing and maintaining an effective Project quality system to ISO 9001. Project completed and commissioned.
* Associated with Petromin Lubricating Oil Refining Company project, LUBREF II, at Yanbu, Saudi Arabia built under Mobil, USA project management and specifications as Senior QA & Certification Engineer. Was responsible for:-
development and compilation of project system dossiers and hand over documentation;
co-ordination with vendors, Chiyoda main office and overseas offices regarding hand over documents;
external quality audits of vendors and contractors and internal audit;
implementation and maintenance of material traceability to quality records;
development and implementation of project quality system and procedures;
provide training on quality management and quality assurance.
assisting project disciplines in quality issues and technical issues in welding, painting, NDE, etc.;
assisting Project QA Manager in implementing and maintaining an effective Project quality system to ISO 9001. Project completed and commissioned.

E. BST ENGINEERING SERVICES (1985 – 1991) - India
* As Senior Manager – Quality. Was associated with following projects:-
Nuclear Power Corporation – Nuclear Power Plant, Kaiga – 2*235 MW capacity Inside Reactor Building critical piping system and equipment;
Nuclear Power Corporation – Nuclear Power Plant, Kakrapar – 2*235 MW capacity Inside Reactor Building critical piping system and equipment;
National Thermal Power Corporation – Thermal Power Plant, Talcher - 2*500 MW capacity;
National Thermal Power Corporation – Thermal Power Plant, Dadri - 2*500 MW capacity;
Indo Gulf Fertiliser Project – Fertiliser plant, Jagdishpur (Engineers Snamprogetti, Italy);
Indian Oil Company – Refinery – Baroda – Capacity expansion;
National Thermal Power Corporation – Thermal Power Plant, Ramagundam - 2*500 MW capacity – HP and LP heaters erection (Engineers Hyundai Heavy Industries, South Korea);
National Aluminium Corporation – Aluminium Refinery – Angul (Engineers AIR Industrie, France);
IFFCO – Fertiliser Plant – Anola (Engineers Halder Topse);
* Responsibilities included:-
development of project QA/QC system, programme, quality plan and procedures;
review of contract quality requirements;
monitoring implementation and effectiveness of quality procedures and system;
quality surveillance of procurement and construction activities;
internal and external quality audits;
Vendor's assessment and inspection of vendors' supplies;
development, review and approval of welding specifications, consumables selection, qualification of welding procedures, heat treatment procedures, coating and painting procedures, NDE procedures and qualification;
provide training on quality management and quality assurance;

F. MINISTRY OF DEFENCE (1973 – 1985)
* New construction ships and major repairs; equipment and material specifications preparation; vendor assessment and selection; material and equipment inspection; on board trials, welding, heat treatment and NDE technical support; supervision of fabrication and assembly work in dockyard, welding, painting and NDE inspection; provide training on technical subjects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8901 to 8950 of 10917)

Go to Search Parameters...

Brief Description

Marine Engineer with an experience of around 5 years at sea, looking for an opening in the oil fields.

please see below

More than 4 years experience in Oil & Gas Refinery in Construction to Start-up Worked in 3 different projects with International Companies. Installation of equipment, Precommisioning & Commisioning system

Would Like To Work In O&G Organization Where In I Can Leverage My Knowledge And Thereby Add Value To The Company. Would like to work on Onshore rigs.

ROV Pilot Training, BOSIET, HUET. Offshore Medicals, STCW 95

diploma im mechanical engineering,able to handle all kinds of equipment s

Graduate in Civil Engineering and Post Graduate in Information technology. Having over 10 years of experience in Marine Civil Construction projects internationally.

Machinist,C.N.C. / Manual 20+yrs. experience

Chemical Engineer, Project and Quality-Security-Environmental Management

34 years in instrumentation industry.

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Goal-driven & result-oriented Oil and Gas Engineer with a strong mechanical, pipeline, facilities & project engineering background and over five years experience in the E&P industry.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Heavy equipment operator,heavy mechanic,pre-employment floorhand(roughneck) training

AutoCad,Ms-Office

Qualified Geologist (Hons Applied Science) 10 years exploration experience in Soft and Hard rock Geology,( Gold and base metals) (Victoria Western Australia and Queensland experence. Also hold a Masters in Commerce Uni of NSW. Looking for a position in China as wife is from Beijing.

Education: Diploma in Electronics Instrumentation & Control Engg. (63%) Skills: System & DCS Engineering, configuration of Simple and Complex loops and Generation of Graphics, Logics development. Attending FAT (Factory Acceptance Test)

Roughneck, Roustabout, Rigger, Rig Clerk, HLO

I have Graduated from the Welding Engineering Technology program and am looking to be a Welding Inspector

Electronics Engieer & MBA in operations and finance with 7 years experience in automation and control projects.Good in project management,PLC,SCADA,Coding.

Excellent Knowledge in Electronic Document Management System, Promote, set up and implement a document management department and system, making it appropriate to the needs of the project through the project lifecycle, Lead the Document Management department, providing effective direction and motivat

Oil & Gas, Petrochemical Industry Specialist

Professional Contract Chef / EMR Available

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

Excise, Service Tax & Sales Tax Work.

All aspects of mineral processing plant construction

Fluid Mechanics and Thermal Sciences

Multi Skill Engineer

Maintenance experience.

Safety Management Diploma, Health and Safety at Work Certificate,Medic,Aviation,Military

An eight year experience including three year gulf experience, Abu Dhabi, UAE. Extensive experience in structural steel (fabrication, materials, drawings…etc). Diploma in Project management (PRMG) from The American University in Cairo, Egypt.

Senior Designer - Instrumentation - Electrical - Controls - Power

Management Representative (MR) for Quality Management System as Per ISO 9001

Poovan Ganason 29, Prsn Jelapang 21, Taman Silibin Mewah, 30100 Ipoh Perak. Dear Sir, RE: APPLICATION FOR THE POST OF ENGINEER With reference to the matter, I wish to apply for the post mentioned above. I'm a Diploma holder with Bachelor of Science ( Honors ) in Mechatronics Engineering.

High - educated, experienced construction engineer. 10 years construction experience in civil building, high voltage electric lines, substations. Company management, team management, consulting.

I am a Chemical Engineer, a (PE) Professional Engineer in Texas, (CSP) Certified Safety Professional and professional member of (ASSE) and (AICHE). Skills; Safety & Process Safety Management, auditing, incident investigation, risk analysis, training, behavior management

Oil, Gas, Chemical, Water Treatment. Senior Project Mgr. Flow Measurement Specialist, Adult Education Instructor,Assessor, Competency Assessment System Construction & Audit, ISO9000,More than 35 years Experience throughout 52 countries

Key word : Power Plant Engineer, Boiler Operation Engineer, Boiler Maintenance Engineer, Turbine Operation Engineer, Turbine Maintenance Engineer,Field Service Engineer, Field Supervisor, Boiler Estimate Engineer, Boiler Shift Supervisor, Boiler Operator,Boiler Performance Engineer,Start up Engineer

B.Sc Engineering (Metallurgical), IRCA Registered Lead QMS Auditor, qualified EMS Auditor, Certified Quality Manager, Chartered Engineer (I) with over 30 plus experience in quality management field in oil and gas industry, having worked oversees since 1992 in Japan, Middle East and South East Asia.

I am working as an Instrument Technician for a well known Fertilizer Plant in Pakistan since 2001 after completion of two years apprenticeship training and now i am confident that i can perform my job very well.

Looking for senior position of project engineer electrical substation and T & D System, have MS from US in Electrical engineering and have over 17 yrs experiance of HV Substation Electrical field.

I have done Diploma in Chemical Engineering with total experience of 8 years & about 4 years experince in Oil & Gas field.

Indian, Chartered Civil Engr. Status, Aged 58, Civil Engg. Graduate (1970) With PG Dip in Management - 34 yrs in Engg / Construction out of which 25 yrs in O&G. Totally 21 yrs with Consultants / Clients & 14 yrs. with Contractors including 20 Yrs. outside India, in Nigeria, Oman, Kuwait & Qatar

Over 30 years of experience in the areas of QA/QC OBJECTIVE: A full-time position in Quality Assurance/ Contractor Coordinator/Construction Management.

I am working as Process Operator in Crude/Vacuum Distillation unit of Refinery and having 5.2years experience

A HIGHLY MOTIVATED AND COMPETENT MULTIDISCIPLINE ENGINEER with extensive hands-on experience in Offshore Oil and Gas projects and Power projects in India/ Malaysia/ Korea/ Brunei/ Singapore, who has developed:

I am a Professionally, Technically skilled - INSTRUMENTATION TECHNICIAN. Working in Oil Refinery

Qualification: Mechanical Engineering (National Diploma); Skills: AutoCAD 2000 Draughting, Project Costing, MRP (Materials Requirement Planning).

I am a Planner & Follow-up Engineer consolidated with the latest tools of projects management such as (Primavera 3e/c V4 , Expedition V8.5 and many supporting computer programs) and very presentable.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 [ 179 ] 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out