Resume - American with experience in Production-downhole & surface, Management, Completio...

Misco Jobs

Resume #1461

CONTACT INFORMATION:
View contact information...

EDUCATION

BS Mechanical Systems Engineering, University of Tulsa, Tulsa Oklahoma 1978
        Work full time for Cities Service Oil Co. while obtaining BS Degree.

PROFESSIONAL EXPERIENCE

1991 - NOW    SAUDI ARAMCO, Dhahran Saudi Arabia, Sr. Facilities Design Engineer
Conceptual design of new production and injection facilities. Prepare conceptual cost estimate, obtain committee approval, budgetary commitment and submit progress reports for executive management. Projects range from $150 M to $45 MM.

1986 - 1991    INDEPENDENT CONSULTANT, Project management, well workovers and logging.
Mobil Oil Co. was primary employer along with smaller independents. Worked in Kansas, Oklahoma, Texas and Colorado

1978 - 1986    PHILLIPS PETROLEUM CO. Production Engineer, Reservoir and Completion Engineer
1981 - 1986 Operations Engineer - Ratherford Unit San Juan County Utah/Cortez Co. Redesigned and managed construction of major production facilities and 3000 psi injection equipment and facilities. On site engineer for the drilling and completion of infill wells, recommended, prepared, obtained approval and performed re-completions and workovers on 6-7,000’ wells.
        1979 - 1981District Engineer - Sprayberry District, Odessa Texas
        1978 - 1979Engineer Trainee - Houston Texas and Gt. Yarmouth England

1965 - 1978    CITIES SERVICE OIL CO. - Tulsa Oklahoma, Research Lab
        1970 - 1978 Systems analyst for large mainframe computer system.
        1965 - 1970 Seismograph crew, draftsman, computer operator, programmer

Further details and references will be furnished upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 9905)

Go to Search Parameters...

Brief Description

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

I am a successful, experienced and qualified Start up Specialist, Commissioning Production Supervisor, Shutdown Coordinator with over 16 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

I have more than 27 years of petrochemical experience in a very wide field, including Methane Reforming, Air Separartion, LNG Storage, Tank Farm and Despatch (pipe line, rail, road and ship), Process design and Utilities (water treatment). Also extensive construction and commissioning experience.

Over 20 years experience in the Health, Safety and Environment Field in supervision, training, auditing and implementation of Management Systems in Oil/ Gas Construction and Operations.

Corrosion Engineering consultant

Consultant Night Drilling Supervisor / Drilling Supervisor. Available for immediate employment. Minimum $650 USD per day (more for hardship/dangerous locations).

Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Electronic Engineer with over 20 years experience with specialisation in Process control analytical instrumentation. Worked in oil/gas, chemical, fertilizer, steel, Power/desalination industries.

I have total 21 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinary production supervisor, oil terminal incharege etc. I worked on various International companies.

To obtain a challenging, growth-oriented position with a reputable company that will utilize my current knowledge and skills while affording me an opportunity to developing new ones.

I have experience with several major international oil companies. I also have expertise in drilling, production, maintenance, construction, projects and operations. My experiences have been found at a local and international level.

Experienced in Contract Negotiation, Management, operations and administration at upper levels in business related to Marine Operations, Business Development, Private Business and Coordination of Marine Repair and Refurbishment projects.

I am a Mechanical engineer with 20 years experiences in design of all kinds of piping & fixed equipment design & stress analysis work. I used softwares like CODECALC, CEASER, PVELITE, partly STAAD & ALGOR. My experiences are in oil and gas, power, onshore as well as offshore.

Executive leadership and acquisition of undervalued Assets, Companies or Reserves in the mid & upstream sectors. Energetic leader in Corp. Development, Problem Solving, E & P, Pipelines, Gas Processing and MMS; start-up to multi-billion $$ companies, providing multi-million $$ accretive results.

Dynamic, results-driven Finance and Operations Executive with superior background in large-scale national and international projects/programs.. Proficient at contract negotiation, project start-up/planning and oversight, personnel management, accounting, job costing, contracts and logistics

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

The majority of my experience has been in project Director/management/ engineering and all related to the oil and gas industry offshore and onshore

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

My objective is to utilize my 25 years of experience in the oil industry, as a Drilling Consultant, for a International Oil Company.

Petroleum / Drilling Engineer: - 30 years experience as a Petroleum Engineer, with 9 years in the U.S. and 21 years international. Of this total, 22 years has been in drilling, completions and workovers, 8 years in production.

Looking for an appropriate position in an international company where I can utilize and further enhance my contracts administration/ project management skills with exposure of engineering, that I have acquired over 20 years of working in Oil Refinery/ Petrochemical Industry.

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

Clerical Jobs

HEALTH, SAFETY & ENVIRONMENT OFFICER QUALIFICATIONS 14 years of Technical Writing Experience 14 years of Safety Training 19 years of Teaching Experience 19 years of Business Continuity Experience 22 years of Experience Using & Programming Computers.

I have over 35 years experience in the operations and Management of different chemical plant processes and some refinery processes.

I have more than 20 years experience, world wide, in QA, Safety, & Welding management in manufacturing & construction environments.

Highly knowledgeable in the principles, application, installation, start-up and commissioning, troubleshooting, repair, and calibration of Process Instrumentation and Analyzer Systems.

Twenty-two years in geologic research and preparation of reports on coal and coalbed methane resources in Virginia. Experienced geologic mapper. Microsoft Programs, Earth Vision, Arcview GIS 3.2, ARC/INFO, SPSS, and Adobe PageMaker. published.

A Field Operations / Production Engineering Manager with wide experience in oil and gas production projects. Has excellent skills in production technology / artificial lift / potential EOR screening / scheduling and management of oil and gas upstream & downstream engineering projects.

Extensive experience as a project engineer, piping engineer, engineering manager and project manager for design and construction of gas plants, refineries, cogeneration plants, LNG plants, cross-country pipelines, LPG storage and loading facilities.

Worked on many projects internationally in the Electrical and Instrumentation fields as Technician, Supervisor and Superintendent.

PROFESSIONAL SUMMARY Over 20 years of proven expertise in direct oil and gas operations. An experienced trouble-shooter and problem solver.

Petroleum engineer with 25 years of energy industry experience. Strong quantitative and analytical skills. Experience includes acquisitions, management, reservoir analysis, economic evaluations, exploration, production and natural gas pipelines. Prefer to stay in Dallas-Fort Worth area or Houston.

I am seeking an exploration or a trend development geologist position where I can find reserves for a company by generating well documented low risk prospects and add significant value by identification of additional opportunities on existing acreage.

Objective—Materials or Manufacturing management in an aggressive organization seeking to become best in their trade through intelligent use of systems and processes.

Extensive experience in the Gulf Coast and Gulf of Mexico in all phases of drilling, completion, remedial & production operations.

Internationally oriented. Experience in Oil & Gas, Mining, Engineering, Construction, Computer Manufacturing.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

Summary: I have extensive knowledge in: Cost Analysis, Scheduling, Management, Negotiations, Proposals/RFI/RFQ, Team Leadership, Supervisor, Project Lead, Workshop Development, Document Control, Technical Lead, Technical Writer/Proposal/Reports Writer, Training

To become associated with an integrated international oil and gas company in a managerial or senior staff position in Exploration and/or Operations Geology.

Mechanical process engineer with design, engineering, and operations experience in power, oil and gas and petrochemical.

Twenty-two years experience in production, reservoir and evaluation engineering of both major and independent oil companies. Areas of experience include Rocky Mountain, Mid-continent, West Texas, Gulf Coast, Argentina, and Venezuela.

I am a Chartered Accountant and Company Secretary from India, aged 41.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out