Resume - 3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal we...

Misco Jobs

Resume #1474

CONTACT INFORMATION:
View contact information...

DATES EXPERIENCE

Pan American Energy
10/2002 Comodoro Rivadavia, Chubut, Argentina
Drilling Leader on charge of 6 drilling rigs, managing the Drilling Engineering Department and all Field Operations.
Four Engineers on charge and 12 Field Supervisors.
140 shallows wells (2200 meters average depth) and 6 explorations wells at 3600 meters per year.

Pan American Energy
12/06/2000 Buenos Aires, Argentina
Manager in charge of Drilling Operations of Neuquén and Tierra del Fuego.
Horizontal Wells in Tierra del Fuego (MD at 2800 meters)

TOTAL Austral
31/05/2000 Aguada Pichana, Neuquén, Argentina
In charge of Drilling Operations.

Motomecánica
1999 Buenos Aires,Argentina
Freelance Project. Design & develop of a Compact Well Head.

TOTAL Austral
31/05/2000 Tierra del Fuego, Argentina

Co. Man Senior - Jack up rig – Labrador 124 exploration offshore wells in front of the coast of San Sebastian Bay – Tierra del Fuego.
Two Sub Sea Extended reach wells (2500 meters horizontal drain into the reservoir)

TOTAL ABK
1997 Abu Dhabi, United Arab Emirates
Night Foreman Offshore. (Fur months)

TOTAL Austral
1994/1996 Neuquén, Argentina
Drilling Superintendent for Aguada Pichana & Loma Las Yeguas fields with two rigs. Compact Well Heads, Horizontal Rentries, Horizontal wells. Follow up of Cementing and Mud Contracts. On charge of optimization programs, bits, PDC, mud pits & solids control system.

TOTAL Austral
1992/1994 Buenos Aires, Argentina
Drilling Superintendent in charge of El Huemul Operations.

TOTAL Austral
1991/1992 El Huemul, Santa Cruz Norte, Argentina
Drilling Superintendent. Fully responsibility for 3 drilling rigs operations. 125 wells, 2500 meters deep. Specially effort in order to complies with TOTAL Standard Drilling Instructions, in those items which contractors had no systematic and strict rules: blow out procedures, safety drills, drill string inspections, lost circulation, rig maintenance, casing handling, management information. Optimization in mud & cement formulations, bits programs & general layout rig design.

CADIPSA
1986/1991 Comodoro Rivadavia, Chubut, Argentina
Drilling Manager
Fully responsibility for developing and establishing an Operation Base in Las Heras, Sta. Cruz Norte.
Full responsibility of the general design and construction of two rigs, one workover and one drilling rig ( National 4225)
Selection and buying of one electrical drilling rig in USA (National 1000 E – Odessa, TX.)

ASTRAFOR
1984/1986 Comodoro Rivadavia, Chubut, Argentina
Drilling Superintendent in charge of five drilling rig operations, Chubut and Santa Cruz Norte.

Rio Colorado
1983/1984 Comodoro Rivadavia, Chubut, Argentina
Tool Pusher Training with one Ideco H40 and Ideco 1200 (Los Perales and El Tordillo)
Drilling Engineer for El Tordillo Operation.

Rio Colorado
1982/1983 Bahía, Brazil
Drilling Engineer for the period of one year
Drilling Superintendent Assistant for the period of one year

Bridas SAPIC
1980/1981 Neuquén, Argentina
Trainee on Drilling Operations from Floorhand to Driller for the period of one year and a half and as a Mud Engineer for the period of six months - Loma La Lata Field.

Bridas SAPIC
1978/1979 Buenos Aires, Argentina
Junior Engineer, Maintenance Programs for offshore (General Mosconi semi sub platform) and Responsible for the Maintenance Programs set up for Onshore Drllg. Rigs in Peru and Brazil Bridas Operations.

NESTLE Argentina
1977 Buenos Aires, Argentina
Technical office, part-time scholarship.

EDUCATION

1971/1977 Mechanical Engineer
Universidad Nacional de Buenos Aires (UNBA)
School of Engineering
Buenos Aires, Argentina

Languages: Native Spanish
Fluent English

PROFESSIONAL TRAINING

2000/2002 PAE bp
Well Control - Advanced Safety Audit
Stop - Risk Assessment JSA
Incident Investigation
Defensive Driving - Permit to Work
Buenos Aires, Argentina

2001/ one day LANDMARK CITY FORUM 2001
Drilling Engineering Programs
Buenos Aires, Argentina

2001/ four days 7th LATIN AMERICAN & CARIBEAN
PETROLEUM ENGINEER CONFERENCE
Buenos Aires, Argentina

2000/ three weeks LANDMARK Engineering Programs
Well Plan - Casing Seat
Stress Check – Compass
Drill Model – Dims
Buenos Aires - Argentina

1999/ three days ODDA TOTAL
Directional Drilling
Buenos Aires, Argentina

1998/ one week ESCUELA ARGENTINA DE SURGENCIAS/ IADC
Refresh Well Control Accreditation.
Mendoza, Argentina

1996/ one week DOWELL
Coiled Tubing
Caracas, Venezuela

1994/ two days TOTAL
Ociar (Total Safety System)
Buenos Aires, Argentina

1994/ two weeks MICROSOFT
Windows / Word / Excel / Power Point
Buenos Aires, Argentina

1994/ one week ABERDEEN DRILLING SCHOOL
European Well Control Certificate (offshore / jack up).
Aberdeen, Scotland

1993/ one week PRESTON L. MOORE
Advanced Well Control
Buenos Aires, Argentina

1993/ one day HUGHES TOOL CO.
Design and bit hydraulics
Comodoro Rivadavia, Argentina

1993/ two days INSTITUTO ARGENTINO DEL PETROLEO
3º Jornadas de Perforación Preservación del Medio Ambiente
Buenos Aires, Argentina

1992/ three days COLAPER
8º Colaper
Rio de Janeiro, Brazil

1992/ three days DOWELL SHLUMBERGER
Cementing advanced techniques.
Comodoro Rivadavia, Argentina

1991/ one week SHLUMBERGER
Well Testing
Comodoro Rivadavia, Argentina

1991/ two days INSTITUTO ARGENTINO DEL PETROLEO
2º Jornadas de Perforación Pozos Horizontales
Buenos Aires, Argentina

1991/ one day REED TOOL CO.
Design, manufacture application and hydraulics optimization.
Comodoro Rivadavia, Argentina

1986/ two days ASTRAFOR
Safety car driving
Comodoro Rivadavia, Argentina

1985/ two days ASTRAFOR
Mud Solids Control
Buenos Aires, Argentina

1984/ two days ASTRAFOR
Well Control
Buenos Aires, Argentina

1984/ two days ASTRAFOR

Cameron BOP stacks
Comodoro Rivadavia, Argentina

1984/ one day RIO COLORADO
Human Relationships
Comodoro Rivadavia, Argentina

1984/ two days RIO COLORADO
Group Management
Comodoro Rivadavia, Argentina

1983/ one week SHLUMBERGER
Logging tools and techniques
Buenos Aires, Argentina

1983/ three days RIO COLORADO
Well Control
Comodoro Rivadavia, Argentina

1981/ one week MILCHEM
Well Control.
Neuquén, Argentina

1981/ three days DRILCO
Drilling Tools
Neuquén, Argentina

1981/ two days INSTITUTO ARGENTINO DEL PETROLEO
Blow Out Preventers, Hydril - Bolland
Buenos Aires, Argentina

1980/ one week INSTITUTO ARGENTINO DEL PETROLEO
Drilling Seminar
Neuquén, Argentina

1980/ four days HUGES TOOL CO.
Drilling Seminar
Buenos Aires, Argentina

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 10916)

Go to Search Parameters...

Brief Description

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.

CORROSION SPECIALIST & CHEMISTRY LECTURER

Operations engineer for oil and gas, shallow wells: drilling and workovers, projects evaluations.

Summary21years practical working experience in engineering design including in offshore and onshore and oil project.I worked at refrigerator, trawler,tanker,scientific and container ships.My professional experience has given me an in-depth knowledge of the El.Engineering in Marine/Petroleum branch

Oil Gas and Chemicals

Pipe Stress Analysis planning and detail studies, static analysis of piping systems, including: refractory pipe, jacketed pipe, High / Medium Temperature and Cryogenic piping connected to pumps, compressors, turbines, fire heaters, storage tanks & pressure vessels; underground pipeline.

Highly Experienced Crane and Lifting Engineer

UK Citizen, Environmental Professional educated to PhD level with 20 years environmental science experience including oil and gas operators; wide experience of environmental management for each phase of E&P Lifecycle; External Stakeholders & Government Dialogue a key responsibility

Experience of approx 19 years in various facets of Finance / Accounting / Legal (As Company Secretary)

Industry expertise. More than 20 years of diversified experience in the oil and gas industry in Canada and the Middle East includes expertise in heavy oil exploitation, fractured carbonated reservoir management, facilitating exploration and production and enhancing oil recovery. Project management.

Controls Engineer

Licensed Professional Engineer, performance oriented, with 25 years of extensive broad-based experience in multidisciplinary projects in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering, Procurement and Construction

Over 35 years of diversified experience as an instrumentation and control system /electrical power distribution engineer for petrochemical plants, refineries, synthetic rubber, carbon black plant and oil and gas fired power plants. Provided engineering expertise in the areas of project admin.

Free! I have over 35 years experience as an Instrument and Electrical Engineer in the Refining and Petrochemical Industries. I graduated in 1973 from the University of Louisville with a Master of Engineering with Specialization in Chemical Engineering degree.

Senior Cost Estimator with 20 years of progressive hands-on experience in petrochemical, oil and gas, and consulting engineering industries. Experienced in IPM Aspen Tech; Q-Estimate, Aspen Tech Kbase - ICARUS-2000, Exxon Estimating System, LULO Software - Venezuelan Commercial Cost Software, and SI

I am communicative, hard working. I easily integrate in new working and social environments as I have excellent communication skills and I am very open minded and flexible, I am responsible, ambitious and a real team player. I totally agreed and follow the HSE policy.

Working as Operation Engineer in 3x 400 MW Siemens TG and Doosan's MSF capacity 800000m3/day. Having 24 years of power plant experience.

20 years experience with over 15 years of experience in design, engineering, and project management in the petroleum, and petrochemical industry. Successfully worked in different roles in oil industry in his 20 yrs career – engineering, project, and operation.

Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager

HSE Advisor with 20+ years experience both onshore and offshore; very experienced trainer and program administrator; familiar with ERP and HSE regulations; excellent management skills; complete electronic reporting and tracking; diplomatic and adaptable; conducts safety audits and investigations.

Principal Structural/Project Engineer with 16 years exp. in Oil & Gas Structures and Heavy Civils/Bridges. Worked in America, UK/Europe and Africa. Very diligent and precise but practical in appraoch. With a MSc in Engineering and PhD in Business providing excellent management and leadership skills.

Well site geologist or geologist operation

GE CCGT Power Station Operation Manager with Comprehensive experience in the O&M,Asset Integrity Management and Business Planning

I have 20+ years of experience finding hydrocarbons in basins across the world; mainly through acquiring, processing and interpreting 2D and 3D seismic data and working together with geologists, engineers and landmen to put together economic drillable leads.

Nautica/ DP Operations; Hurricane Operations; Survey/ Warranty Consulting; Marine Business Logistics

I wish to apply for the Full time post of Geologist, presently I am working as a Assistant Professor in Geology department of Poona College of Art’s, Science and Commerce, Camp, Pune ,Maharashtra affiliated to University of Pune, past 21 years at graduate level. During teaching Structu

I am 29 years experienced in HSE arena. It is Included in Oil and Gas, Petrochemical, Lamp Manufacturing and Gas Turbine Repair Shops.

Mechanical engineer with experience of the complete construction process of petrochemical plant from basic design to testing, commissioning, start up and final hand over. Having also a detailed knowledge and sound experience in the maintenance of petrochemical plants.

20 years experience in major integrated national oil company of India. Experience in production operations, process development, enhnaced oil recovery projects and research work related various operations of the company.

Instrument and Controls Engineer

Over 18 years total experience in design engineering, process systems, field engineering, project engineering. This includes design and specifications, chemical process analysis for Process Technology units, strong skilled in water treatment process. Proficient in the use of: AutoCAD, Microsoft Wind

Metallurgical Engineer, Metallurgsit

Economic and Reserve analysis, acquisitions, reservoir engineering in California heavy oil and Appalachian Basin natural gas

Having more than 20 yeas experience of working in the oil and gas fields around Middle east.

Master mariner, six years master experience, Four years pilot experience. Presently working as full length pilot

Process Engineer with 20 years of experience in EPC and operating companies

PROJECT ELECTRICAL ENGINEER

Structural Engineer • PROFILE • Demonstrated design experience in structural steel and concrete - Energy/Power and Oil/Gas industry. • Diverse heavy construction experience in buildings, pre-casting, bridges, highways, dams, estimation and bidding for construction projects. EDUCATION MS. Structur

Sr. Project Engineer/ Project Manager

Over thirty years international experience in the Oil, Gas, LNG and Petrochemical Industry in responsible management positions for capital intensive projects, business development, operations, and engineering in a multicultural environment.

3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.

More than 10 years of experience coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore/onshore and subsea industries.

Able to hadle Operation and Management

Petroleum engineer with over 23 years of oil and gas industry experience, including over 14 years of drilling fluids engineering in Romania, Middle East (offshore and onshore), Canada offshore (Terra Nova project) and onshore (Western Canada), Alaska, India and 9 years with Romanian drilling

Over 28Years Int'l and Domestic heavy Industrial Constn: experience combined with Admin, Estg: and PM Skills

Experienced oil & gas geoscientist in exploration, production and business development

M.Sc Geology specialization in Geophysics. Certicication in Advanced Professional Geophysics from Germany. Frofessioonal experiencein seismic data acquisition and interpretation. Geological and geophysical project evaluation and decision making on technical and financial proposals.

More than 20 years in technical and HSE field, Senior Management Position, Presently working as HSE coordinator for a Multinational Oil field company at Oman

I am a seasoned, experienced geophysicist/geoscientist & explorationist, and am updated with the latest technology, with in-depth experience in geophysics, as well as geology. I seek a suitable position in oil & gas G & G.

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out