Resume - Mechanical, Automotive, Project, Calibration, Engineering, Production

Misco Jobs

Resume #14874

CONTACT INFORMATION:
View contact information...

Education and Trainings:

* Academic Course:
Mechanical Engineering (B.S)-Solid Design, 2000: IH University, Tehran, Iran
Certified as a Professional Mechanical Engineer by IEAUST
* Soft ware courses:
AutoCAD 2000, Mechanical Desktop 6, Catia 5, Inventor and MS Office.
* Technical courses:
Press lines operation – Blank lines operation – Quality Improvement activities
Process management – CMM operation and installation (UK) – ML10 Laser (UK)
CMM Calibration (UK) – Geometric Dimensioning & Tolerancing & Metrology
Ball bar Machine - Length Calibration – Part Approval Methods – Six Sigma
Machine checking gauge - Team working & problem solving methods – SPC
Vehicle Validation (Renault-France)

.Certificates are available.
Experiences:
A
2005 - NOW Vehicle Performance Test Responsible, Techno Centre, Renault, Tehran, Iran
Summery of my duties are as follow:
Vehicle technical test, power evaluation of cars, Gathering customer expectations about the cars; Implementation of VOC "Voice of Customer" to improve the quality, Managing of the unit; Cost control.

WWW.RENAULT.CO.IR
RENAULT – NISSAN GROUP
B
2000 –2005 Responsible Expert, Engineering Center, IKCO, Tehran, Iran
Summery of my duties are as follow:
Tools design & draft, project development engineer in development phase, product quality improvement, Installation of machinery and production line and calibration, Part suppliers supervision and part approval for projects, process design, method and quality engineering activities, CMM, Vehicle pre launch.
WWW.IKCO.COM
Iran Khodro Industrial Group CO.

Achievements and Talents:

* Experienced professional with a successful career in Mechanical engineering in international environment
* Effective interactions with different levels of organization to ensure organizational goals are attained
* Successful within highly competitive environments where leadership skills are the keys to success
* An effective responsible expert with the skills necessary to direct, train, and motivate staff to its fullest potential, my successful projects can prove it.
* Ability to work as part of a team: Member of D7 Project team, P206 Team.
* Leadership for Implementation projects such as: Peugeot 206 BQIT, Press CMM, Stamping press installation, L90 validation project.
* Managing of projects with over 2 million Euros value.
* Great passion to work on sites to handle hard and active jobs
* Strong analytical and corrective action abilities and high attention to detail for the collection and recording of data
* Quick and efficient response in duties and good and strong verbal and written communication skills
* Providing engineering support via test to validate product design to meet customer requirements
* Machine - tools and Mechanical Equipment designing and drafting
* Proficient in Drafting with AutoCAD & Mechanical Desktop & Catia V5 (2D & 3D & CAE)
* Part inspection Supervision on part suppliers based on quality standards and solving quality problems
* Process management methods and capability study (Production line improvement.)
* Providing metrology (tolerance definition, tolerance chain, GD&T, CMM) support to other Dept
* Production line and jigs and fixtures adjustment to achieve the quality Targets (Quality Improvement)
* Certified expert by reputable companies such as LK and Aberlink in UK for installation-calibration-maintenance of Coordinate Measuring Machines
* Licensed expert for laser Calibration of machinery by Renishaw plc (UK) with hands-on training in them
* Manufacture, installation, and maintenance of machinery tools (jig, fixture, conveyor...) and products
* Review progress claims and recommend payments, monitor contractor costs
* Monitor progress against schedules, advise Managers of any possible scheduling problems
* Implementation of VOC" voice of customer" in company in order to prevent defects
* Introducing major problems in vehicle and their sources such as labor, material, machine
* Test data record, evaluation and preparing reports
* Conduct overall subjective evaluations on vehicles for synthesis and tuning
* Evaluate and highlight the dynamic performance of competitor vehicles
* Define test unit requirements then manage and ensure conformity of vehicle fleet
* Build mock-ups, re-align and service test vehicles
* Help in handling specific problems
* Synthesis development progress and feedback evaluations
* Ensure conformity of vehicles for «press presentations»
* Production Validations
Researches and Published Documents:

* Established technical papers in IKCO technical magazines about fuel injection systems.
* Executive project leader of Stamping press calibration methods.
Interests:

* Studying technical books and magazines.
* Football and swimming.
* Music.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5001 to 5050 of 9785)

Go to Search Parameters...

Brief Description

AutoCAD, ProE, CATIA , Primavera ,DataStream 7i, MP2

Excellent English, excelent communication skill, great team player, great Marketing education background, fast learner, and highly motivated.

Preparing well program and well planning. Rig site night drilling supervisor.

experience and certified rigger and craneoperator has an experience in civil, mechanical, oil and gas industries

Production & Process Operation of whole plant with the help of DCS (Experion PKS R100) & supervise all other offshore activities, co-ordination of Slick line job, BHP survey & Work over in the wells, all types of maintenance jobs, Supply Vessels, Chopper Activity, Fire Fighting Team Leader & all hot

Certified International Project manager (By the AAPM)

HIGHLIGHTS: Geology, Oil sands, Heavy oil and bitumen recovery, Drilling, Well logging, Advanced Petroleum Technology; Methodical, efficient thought procces, positive and professional attitude, job task planning and organizing

I am a Diploma Mechanical Engineer having experience around 5 years as production operator.

My job objective is be involved in a challenging and creative position where I can apply my education in innovation and Further development of existing technology - as a petroleum engineer

Mechanical engineer having experience in piping design

Project engineering and management, business development, soviet design standards, Russian speaking, oil & gas, minerals and metals

Operate fractionation plant, lean oil extraction plant, refigeration plant, instumentation work, maintenance work.

BSc Geological Engineering

Safety Engineer / Rigging & Lifting Eng

Projecr /Construction manager

Seeking a job position in the field of Instrumentation, with challenging opportunities to further enhance and optimize leadership and technical capabilities and to contribute to the success of my employer in my fullest interest and potential

Chemical Engineer with 7 years of experience in Chloralkali Plant and Caustic Concentration Flaking/Prilling Unit

I am currently a final year M.Sc. Student in Electrical Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM). My graduation is expected by May 2003 and I will be available by July 2003.

1.2 years of Experience as a Piping Engineer, 2 Year of Experience in PDS Modeling

I am a Controls and Instrumentation engineer from Pakistan. I have 3 year experience

Electrical Engineer

Application for the Post of Piping Designer .

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

LSIT, total 12 years of surveying

PIPING DESIGN STRESS ANALYSIS ENGINEER

Reservoir Engineer

I graduated from Bandung Institute of Technology (ITB) majoring Chemical Engineering on March 2004 with GPA 2,92. I have experiences as a chemical tanker chartering team and process engineer.

A senior manager with over 25 years experience in engineering management including sales and project engineering in the Middle East, North Africa & UK within the oil, gas, construction, power, petrochemical sectors with blue chip companies including Saudi Aramco, Shell UK and British Gas.

Thirteen years experience of Project Execution, Quality Assurance & Quality Control at OIL & GAS Industries at Saudi Aramco, QatarPetroleum,Parco Refineries, National Oil Refineries, PSO Plants, in Saudi Arabia ,Qatar & Pakistan involved with the FAT’s, Installation ,Testing and Commissioning of

Senior QA/QC Engineer (Welding, Inspection & NDT) / Construction Superintendent, with more than 12 years of experience in the field of Oil and Gas performed with multinational engineering companies

stat engineer (oil and gas exploration) , drilling rig move fishing

MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD

B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.

Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

QA/QC Inspection, Fabrication, Installation, Facilities Upgrade etc.

Special Skills in DCS Operations

SAP SD functional cons. resume total 6 yrs exp 3yrs in SAP SD+ IS OIL functional consultant

Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.

Mechanical, Automotive, Project, Calibration, Engineering, Production

Instrument technician

I am working as safety officer at Aramco Saudi Arabia for more than 6 years. I am interested to work in your country. Please arrange my telephonic interview and if you need further documents please inform me on my email.

Operation and Maintenance of Utilities, Project Management, Energy Management, Six Sigma and IT applications

In Indian Naval Hydrographic Department, I have worked in various organizations of Naval Hydrographic Department at various capacities including survey assignments onboard ships, National Hydrographic Office as Quality Controller/Quality Assurance member and National Hydrographic School as Hydrograp

15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

Drilling Engineer / TourPusher

Petroleum Engineering

interpretation of isometric drawing. preparation of materials, equipment and tools for the installation. cutting and grinding as per cutting plan, lay-out f pipes and plates as per drawing, fabracation and installation of pipe spools, pipe supports and other structural supports.

Working as a piping engg. in Satnam Engg. & Fab. Pvt. Ltd. I take training for piping design and also done PDS training.i had completed my B.Tech Mechanical engineering in 2007 from U.P.T.U. Lucknow. I have one year experience in construction field and searching a job i

First Prev [ 101 ] 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out