Resume - I am holder of a Bsc. in Marine Mech. Eng; Major: Offshore Engineering. My back ...

Misco Jobs

Resume #14984

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
Wellhead Engineer 2002-2005
FMC Energy Systems- Surface Wellhead Division
Abu Dhabi, UAE
* Supervised offshore/onshore various wellheads systems installation, (Tubing Hangers with CIL, CTR Line, ESP Cable, Electric Line for down-hole gauges Preps)
* Supervised testing, maintenance and repair operations
* Subcontracted and assisted in engineering estimations.
* Advised customer personnel in selection and use of Wellhead equipment particular to the requirements.
* Assisted customer personnel in scheduling equipment deliveries to field locations in accordance with drilling activities.

Yard Engineer (Nominated Position) 1999-2002
Gulf Oil & Gas Services (GOGAS)
Abu Dhabi, UAE
* Responsible for Drawings/Design review, detailing, and work procedural preparation
* Supervised fabrication erection, quality control and third party inspection activities
* Assisted in subcontracting and in engineering estimation.
* Assisted in material take-off and procurement.
* Coordinated with certifying authorities (Lloyds Register, Germincher Lloyds, B.V.) and GOGAS marine department to carry out maintenance work on machinery, diesel engines generators, cranes and steel hull of marine vessels/barges
* Appointed as an Internal auditor to follow up the implementation of procedures as per ISM/ISO-9002 requirements and HSE policy

Responsible for management and coordination of site projects activities (when awarded) among various project functions and engineering disciplines, such as:

* Assisting in planning and scheduling of various project activities, preparation of work methods statements and risk assessments.
* Welding procedures and welders qualification test preparation.
* Responsible for mobilization to site, and control all Project activities (Piping erection, Instrumentation, electrical works …).
* Coordination with client representatives at site
* Testing of (Piping, Electrical & Instrumentation) systems and preparing QA/QC sheets.
* Pre-commissioning and punch list handling.
* Commissioning and handing over to client.

List of projects worked for:

Project Engineer June 2002- September 2002
Bunduq Company Limited
Abu Dhabi, UAE
Project: Modification/ Refitting of Boat Fenders at Wellhead Platforms

Project Engineer January 2002- April 2002
Abu Dhabi Gas Liquefaction Company (ADGAS)
Das Island, UAE
Project: Al Jimi Camp Additional Accommodation; Fabrication / Installation of 130 Tons of
Structural Steel.

Project Engineer December 2001- January 2002
Abu Dhabi Gas Liquefaction Company (ADGAS)
Abu Dhabi, UAE
Project: Repair/Modify various plant facilities as part of shut down plan

Project Coordinator
Abu Dhabi Gas Liquefaction Company (ADGAS)
Das Island, UAE
Project: Replacement/repair of berthing dolphin's no. 1 and no. 5 for gas carriers at the LNG Terminal

Project Engineer February 2001- November 2001
ZAKUM Field Development Company (ZADCO)
Abu Dhabi, UAE
Project: Installation and commissioning of test separators and related piping/Instrumentation on wellhead platforms.

Project Engineer June 2000- August 2000
ZAKUM Field Development Company
Abu Dhabi, UAE
Project: Installation of third manifold and related piping to bypass high-pressure oil wells

Site Engineer February 2000- May 2000
Abu Dhabi Gas Liquefaction Company
Abu Dhabi, UAE
Project: Demolition of F.D. fan houses (In a life gas plant) and installation of new house structure

Marine Maintenance Engineer May 1999- January 2000
Gulf Oil & Gas Services (GOGAS)
Abu Dhabi, UAE
* Responsible for maintenance planning and coordination with certifying authorities for periodical surveys of the marine vessels afloat and in dry docks
* Planned and supervised repairs of structural steel, main engines and generators overhauling, maintenance of and safety equipment onboard marine vessels

Teaching Assistant May 1999
College of Engineering

EDUCATION
Masters of Engineering Program Present
Memorial University of Newfoundland
Thesis focus: Integrity of Oil/ Gas Facilities and Risk Based Maintenance Systems

Bachelor of Marine Mechanical Engineering Degree (Honors, 3.95 GPA) August 1998
Arab Academy for Science, Technology and Maritime Transport
Alexandria, Egypt
Major: Offshore Engineering

Third Engineer Certificate July 1998
Arab Academy for Science, Technology and Maritime Transport
Alexandria, Egypt

High School Diploma July 1993
American School
Saida, Lebanon

OTHER TECHNICAL/ PRACTICAL COURSES
* Attended "Service Skills Training School" for Wellhead equipment, conducted by FMC Energy Systems, Abu Dhabi, March 2003
* Internal auditing course of ISM/ISO-9000, under BVQI supervision, Abu Dhabi, October 1999
* Commercial Diving course equivalent to HSE part 1

HONORS
* Awarded for the highest graduate achievement; the Institute of the Marine Engineers, United Kingdom, 1997-1998
* First place in graduation class, September 1998
* Engineering Dean's list (highest GPA, for five years), awarded certificates of admiration for this achievement, 1993-1998

SPECIAL SKILLS
* Computer skills in programming and operation of various M.S. programs
* Languages: Arabic, English, knowledge in Spanish and French
* Experience in stress analysis and design program (STAAD III)

References
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5851 to 5900 of 9785)

Go to Search Parameters...

Brief Description

Senior piping designer

worked as an operation engg, has a very good operational knowledge, result oriented, belives in doing work with available resources.

Structural engineer with almost 3 years working experience in the field of oil and gas industry,

HSE Manager

Instrument & DCS Specifications datasheets, I/O list preparation, JB,Cable schedule, Logic Diagrams, Wiring Diagrams, Cable and Tray routing, hook-up Drawings, Installation Standards, MTO, Technical Procurement assistance, DCS Detailed Engineering, Project, construction and commissioning activitie

I am a degree holder in Mechanical engineering. Also having sound knowledge in PDS, Microstation. Presently working as a Lead Engineering Manager in Plant Layout and Piping Discipline.

Project Planning Engineer

Instrumentation Engineer

3rd Year Student in B.s.c Geology finishing at June (final Year)

Undergone training on DCS (CENTUM 3000) and Prosafe Safety PLC on YOKOGAWA system at YOKOGAWA INDIA LIMITED, Bangalore.

Piping / Structural Draftsman

Batchelor's degree in mechanical engineering from Cal Poly, SLO. Experience using various hand and machine tools, CAD programs etc.

I have obtained my Bachelor’s Degree in Instrumentation Engineering

Ten years of experience in electronics manufacturing, test development and PCA design.

I'm operator oil&gas production, i have very good experience (09years above), so i have the ability to work under presure and i have the spirit of the teams , these are my differents daily tasks:operator storage& lact meyring system, separation&stablizers; re-run system, process gas, deshydratation,

Extensive Industrial Mechanical Maintenance, Supervision, Planning & Coordination within Europe, Canada, Middle East, North / West Africa and the Caribbean.

Familiar with onshore and subsea pipeline design criteria / requirements, codes and standards: Familiar with offshore pipeline installation and design requirements. Proficient in the use of MS Project, Word, Excel, and Power-point. Familiar with stress analysis procedures ANSYS and Orcaflex

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

Welding positin utilizing technical skills for a growth-oriented organization.

1) Leaderhip. 2) Organised. 3) Decission making

Chemical Process Design Engineer, work experience in various projects of Oil & Gas Plants / Transferring Pipeline Simulation & Design, Specialist in design of Amine Sweetening plants, Working familiarity with following software: HYSYS, PRO II, PIPEPHASE, HTFS TASC, OLGA, MS Office Excel & Macro

I am holder of a Bsc. in Marine Mech. Eng; Major: Offshore Engineering. My back ground in oil field construction activities (Onshore /Offshore), and and extensive experience in wellhead engineering, maintenance, repairs and testing.

Highly experienced Planning Enginner (scheduler) in the Nuclear sector. Very computer literate and from a unique and enviable IT/Engineering background. A deep background in projects and technology exploitation. Very well regarded and likable.

I am an Italian structural/regional geologist with a long experience in the academic world.

I am 16 year exprince HSE profetional , and looking a bright working environment for batter prospects

Geophysicist, QHSE Advisor, Auditor ISO 2000:9000, MCSE, MCDBA

Mechanical Design Engineer

Well cementing specialist with an experience of three years in the field of well cementing. Great knowlege in location safety and

I have had over 4 years in the oil field and am currently a Driller, and 8 years in the US Army serving as a Signal Support Specialist.

Expertise in Contracts & Materials Management field of Vendor Development, Materials Procurement, Expediting etc.

In 1986 I was hired as a Plant Mgr. of a company that was ready to go under. Through the years of experience I gained the knowledge I needed to turn things around. The company remained in business,until 2006, because the owner wanted to retire. I was never given the opportunity to take it over.

A technically qualified mechanical engineering professional, who has built a sound career in post-contract administration, procurement, and expedition.

Network Administrator Looking for a challenging job in the field of Project Management, Network Installations and Internetworking, which provide me with a completive and healthy environment and enables me to build up an excellent career.

Human Resources or Administration Assistant with a long experience with international companies

Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes plant operations in various industries, which includes offshore and onshore oil & gas design, petrochemical, chemical manufacture, gas processing, and other industries.

More than six years working experience in Auto CAD/Auto LISP. Presently working in Doha, Qatar as an Instrumentation Designer.

Highly experienced and motivated Electrical Technician with over 16 years in the Oil and Gas industry having Electrical Installation, Commissioning and Testing experience, of which several years were spent in the Drilling and Exploration as Chief Electrician, on a Mobile Jack Up Unit.

* Piping Engineer with 7 years of rich & solid experience in Pipe Stress Analysis & Support Design of Petrochemical/Refinery/Power/Chemical/Man-made Fiber processing plants. * Exclusive Field experience.

I’m looking for a new job position that avails my experience, my skills & knowledge, and permits me to perform new ideas in the company profit. I have been working in the oil industry for five years. I have experience in production operations and computer applications.

I have worked as HSE Consultant with multinational Oil companies on Seismic survey and at rigs. I have earned M.Sc. and M.Phil degree in geophysics with research on environment in M.Phil.

OBJECTIVE: To pursue challenging career in a dynamic and career oriented organization

A highly motivated young professional with extensive academic background and more than 6 years of experience in two of the largest Bulgarian Energy Companies.

Reservoir Engineer with 6+ years of experience in reservoir simulation, pressure transient analysis, classical reservoir engineering etc. Experience in various reservoir engineering software like Eclipse, OFM, MBAL, Petroleum Work Bench etc.

Sr. QA Inspector

I have a large experience in erosion control works for pipelines

Please Contact ASAP

I have 7 years experience both in Kuwait and in Egypt include Familiarity with electrical control systems & electronics devices Planning & controlling of medium and large size projects

Entry level engineer looking for a career with a well established company. Willing to relocate.

Chartered Mechanical Engineer with 7 years Oil & Gas experience. Hold a U.S. Green Card and now seeking employment in the U.S, preferably Houston.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 [ 118 ] 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out