Resume - Im graduated of bachelor of science in civil engineering, I have 14 years experi...

Misco Jobs

Resume #15120

CONTACT INFORMATION:
View contact information...

EDUCATION

POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
Sta. Mesa, Metro Manila
1981 - 1986
BACHELOR OF SCIENCE IN CIVIL ENGINEERING

WORK EXPERIENCE

Sept. 23, 2003 to Sept. 16, 2004
Company: L.S.W. Engineering Pte. Ltd.
Address: # 01 Tuas Ave.11, Singapore 608615
Department: Engineering Department
Position: Senior Checker & Detailer

PROJECT INVOLVED
C822-Circle Line Stage-2 Mainline - Singapore
Through Econ/NCC J.V.
Woodlands Secondary School – Marsiling Rd. Singapore
Through – Kwan Yong Construction Pte Ltd
Changi Water Reclamation Project – Changi Singapore
Through Lumchang Construction Pte Ltd

Nov 28, 2000 to Sept. 09, 2003
Company: P.F. Engineering Pte. Ltd.
Address: # 12 Penjuru Close., Singapore 608615
Department: Engineering Department
Position: Project Engineer

PROJECT INVOLVED
Ministry of Defence "ATTC" (All Terrain Tracked Carrier.) - Singapore
Through S.T.Kinetics.

July 01, 1999 to Jan. 02, 2000
Company: H.S. Epim Engineering Pte. Ltd.
Address: # 03 Benoi Rd., Singapore 629877
Department: Engineering Department
Position: Senior Checker & Detailers

PROJECT INVOLVED
Kuito Field Phase1 FPSO, Module 2 & 3 (Chevron Petroleum Inc.) - Singapore Through Single Buoy Mooring Inc.
Espadarte Field FPSO, Module 1 & 2 (Petrobras) - Singapore
Through Single Buoy Mooring Inc.

December 01, 1998 to June 30, 1999
Company: Henry Structure Detailing Pte. Ltd.
Address: King George Bldg., Singapore 208567
Department: Engineering Department
Position: Structural Checker & Detailer

July 1998 to December 1998
Company: POLA Engineering Pte. Ltd.
Address: 14 Kian Teck Way, S'pore 628737
Department: Engineering Department
Position: Senior Checker & Detailer

PROJECT INVOLVED
POSB Bank H.Q. - Singapore
Through Ssang-yong Engineering and Construction
North East Line MRT - Singapore
Through Yongnam Engineering
North East Line MRT – Outram Park (Singapore)
Through Land Transportation Authority

October 1997 to June 1998
Company: Ikeshita Architect & Engineering Consultant
Department: Engineering Department
Position: Autocad Operator & Detailer

PROJECT INVOLVED
Trellis Tower – Toa Payoh Lorong 1 - (Singapore)
Through Shimizu Corporation
River Place Condominium – Havelock Road (Singapore)
Through Takenaka Corporation

DUTIES & RESPONSIBILITIES
1) Assist in product design and generate detailed drawings.
2) Reviewed design drawing and technical specification and develop cost effective solution to fulfill customer requirements.
3) Assist in drawing control and documentation.
4) Provide fabrication drawing such as vessel, piping and structural (e.g. platform, stair, handrail, ducting and all steel structure) for shop execution.
5) Prepare material cutting plan, cutting list, template and material take-off for job execution.
6) Perform technical drawing study and part inspection (dimensional, visual) and functional test at varies stage.
7) Plan and implementation of work schedule and progress to meet the required workforce according to the master and detailed work programmed.
8) Receiving inspection of steel material and heat number against mill certificate.
9) Coordinate and liaise with client and sub contractor for daily progress and the important matter to prevent miss understanding.
10) Supervise skilled and general worker (e.g. fabricator, welder and helper) for fabrication and erection.
11) Conducting site/field inspection for verification of some matters and providing As-built drawings for client future reference.
12) Carry out site supervision for (color banding, valve tagging & punch listing) and other task assign by immediate superior.
13) Preparing piping isometric on P&ID and material take-off for ordering necessary materials.

March 1993 to September 1997
Company: Al Zamil Heavy Industries, Ltd.
Address: P.O. Box 13169, Jeddah 21493, K.S.A.
Department: Engineering Department
Position: Cad Operator / Structural & Vessel Detailer

PROJECT INVOLVED:
Saline Water Desalination – Jeddah Saudi Arabia
Through Mitsubishi Heavy Industries
Tanks & Silos – Riyadh, Saudi Arabia
Through NABATI Company
500m³ Cement Silos – Riyadh, Saudi Arabia
Through Saudi Liebherr
Boiler Ducting – Rabigh, Saudi Arabia
Through Mitsubishi Heavy Ind.
Hot Belt Stabilizer – Riyadh, Saudi Arabia
Through Stone & Webster Engineering Co.
Air Duct to Wind Box – Shoiba, Saudi Arabia
Through Korean Heavy Industries (Hanjung)
Pipe Rack Steel Structure - Ras Tanura, Saudi Arabia
Through Cerrey Co. (Mexico)
Platform for Storage Tank - Ras tanura, Saudi Arabia
Through Flour Daniel Arabia
Low Pressure Vessel Aramco (ASME Code)- Shaybah, Saudi Arabia
Through Bechtel Ltd.
Discontinuous Blow Drum – Jeddah, Saudi Arabia
Through Technimont-(Italy).

DUTIES & RESPONSIBILITIES
1. Study client drawing and specification to provide shop drawing for the reference and information of shop personnel to ensure the correct fit-up and lay out of material on shop fabrication..
2. Checking and revising the drawing if there is client or designer comment, and there is material change.
3. Preparing external transmittal of finished drawings for submission on review and approval of designer and client.
4. Making a progress chart on every project to determine the critical condition and to avoid delay in delivery schedule of such project.
5. Using new software in drawing technology of computer ("IGPL" & Autocad Rel. 13) on structural and vessel drafting.
6. Preparing accomplishment report of assign project from day to day.

February 1992 to February 1993
Company: Olayan Descon
Address: Jubail, K.S.A.
Department: Engineering Department
Position: Engineer III

PROJECT INVOLVED
Fertilizer Conveyor – Jubail, Saudi Arabia
Through Saudi Arabian Fertilizer Company
Tie-Ins (M.T.B.E.) IBN Zahr – Jubail, Saudi Arabia
Through Snamprogetti - (Italy)
Silos & Tanks – Jubail, Saudi Arabia
Through Mitsui Engineering & Shipbuilding Co.
Heat Exchanger – Jubail, Saudi Arabia
Through A.Y.T.B.
Pin Fan Cooler – Jubail, Saudi Arabia
Through A.Y.T.B.
Platform & Stair – Jubail, Saudi Arabia
Through IBN-Baytar

DUTIES & RESPONSIBILITIES
1) Responsible for the generation, issuance and maintenance of quality documentation.
2) To provide a system of check taken, at pre-determined stages of fabrication, to ensure that aspect essential to the correct operation.
3) Perform visual, dimensional, N.D.T.(M.P.I. & Dye Penetrant) inspection for the assign project to meet the requirement procedures of the clients.
4) Provide all the documents pertaining to such project liked, dimensional inspection report, welding inspection report, material test certificate, hydro- test inspection report.
5) Responsible for the safety rules and regulation of the factory to prevent any accident that may occur.
6) Perform any other related task that may be assigned by the immediate superior from time to time.

May 1989 to January 1992
Company: Grandspan Development Corporation
Address: Bo. Tayuman, Binangonan Rizal, Phil.
Department: Estimating Department
Position: Estimator/Project Coordinator
PROJECT INVOLVED
1. Philippines Asahi Glass Corp. - Pasig Metro Manila
Through DMCI Construction
2. Essential Maintenance Facilities - Clark Air base
Through DMCI Construction
3. Jing Guang Centre - Beijing China
Through Nippon Steel Corporation
4. United Overseas Bank Plaza - Singapore
Through N.K.K. Corporation
5. SOGO Project - Hong kong
Through Nippon Steel Corporation
DUTIES & RESPONSIBILITIES
1) Prepare quantities of take-off describing every item needed for project in detailed indicates quantities required.
2) Analyze comparative advantages and estimates cost using different method in fabrication and application of substitute materials according to the standard.
3) Prepares progress report and production forecast of assigned project.
4) Perform regular site inspection of on-going project and coordinates with the construction personnel for the progress and speed-up of erection.
5) Prepare daily accomplishment report for in-coming and out going project to determined the status of a project.
6) Handle 20 to 25 skilled personnel regarding the execution of work (Lay-out man, Fabricator, Welder & Helper).
7) Coordinates with construction superintendent of assigned job on delivery requirements.

QUALIFICATION

Experience in Detailing and Checking of Structural Steels as per AISC Standard and knowledge in basic design of vessel as per ASME VIII Div.1 and Storage Tank as per API 650 respectively.

SPECIAL SKILLS

Knowledge in Autocad Rl. 13, 14, 2000, 2002 & 2004

SEMINARS/TRAINING ATTENDED
Training on I.G.P.L.
Sponsored by Al Zamil Heavy Ind. Jeddah, K.S.A.
(January 15 to February 23, 1994)
Training on Autocad Rl. 11
Sponsored by Grandspan Dev. Corp. Binangonan, Rizal
(January 5 to January 27, 1992)

CHARACTER REFERENCE

Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3051 to 3100 of 9785)

Go to Search Parameters...

Brief Description

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

QA/QC Architectural Supervisor/Inspector

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

I am Civil/Structure Engineer with almost 10 years experience in oil&gas, petrochemical, cement, powerplant and mining industries.

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I have worked extensively with various simulation packages viz. MoReS, Eclipse, VIP, MORE etc, I have over 8 years experience as a Petroleum Engineer, specializing in reservoir engineering.

QHSE-Advisor on crews worldwide, Extensive knowledge of Uphole Drilling programs

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Free PC user. Competative, acurate, punctual

Material Controller, 2yrs Petrolum/Oil Oman Exp and 6ys India Exp,

I am working as a QA/QC Engineer in Oman.I am expecting a challenging job to prove my potential.

I am working as Directional driller in Mitchell Drilling India Pty Ltd, India. Currently working on Multibranch holes. Till now planned 20 Multibranch holes and hit the target as planned. Have worked in horizontal wells in CBM and got the idea of horizontal well drilling and ER wells.

Bachelors and Master's in Geophysics with almost 3 years in Oil & Gas Industry

Wellsite Geologist – Operation Geologist, geology department representative at rig site for drilling activity of: development, delineation, and exploration wells with over pressure risk. Familiar with deltaic system, mainly in gas field.

I am a petrochemical engineer with over 25 years of operation and technical service experience in ethylene plants.

Six years experience in Project Controls and Project/Programme Management (including three years experience in EPC/PMC projects). Focused mainly on planning & scheduling & project risk management.

IT leader with solid accomplishments working for global industries for the last 20 years. Value delivered in Brazil, Argentina, United States, Canada, Uruguay, Puerto Rico, Colombia and Germany. Focus on IT ROI, management, planning and operational excellence.

MBA Project Manager experienced in managing both infrastructure and application development projects.

Supply Chain Management & Well Optimization Coordinator

Cathodic protection engineer with 7 years exp. with every aspect of C.P,Well versed with NACE and other Interntional and Industry specific stds

Computer knowledge, documentation, teaching, research works and quick learner.

Pipeline engineer and Stress analyst (CAESAR II)

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Worked as Rotating Equipment Engineer for various types of rotating equipments for refineries, petrochemical and nickel-mining plants in compliance with the project specifications, clients’ requirements and international codes and standards. Field engineering works during construction stage related

I am Junior Piping Designer with PDMS skill

Hse speciality

I am 32 years old, male, married, a university graduated on Offshore Engineering Dept. of ITS (Sepuluh Nopember institute of Technology) Surabaya. I have been working at some Batam shipyards since 2001. Presently, I am working as Project/Piping Engineer. Additionally, I’ve some computer skills.

MS Degree drilling engineer with 4 years of experience in oil and gas industry. A motivated person with good team work skills and experience in multi-national projects and environment. Looking for position of Night Drilling Supervisor or Wellsite Drilling Engineer on/off

Certified Drilling Fluids Engineer with extensive knowledge of oil field operations and experience working with oil wells, and well maintenance

Ngondi Bessala is a Senior geologist with more than 20 years experience as Exploration Geologist, Operations geologist and wellsite geologist with major companies Elf then Total, Conoco Phillips as consultant, with independants Perenco, Maurel & Prom, Addax Petroleum and CMS energy

Diploma in Chemical Engineering

BE in Mechanical Engr

Mechanical engineer, autocad, offpipe, microsoft

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc

As A Production Optr Carried Out: DCS [Yokogawa 1000 & CS300, Emerson] Oil Production & Processing, Gas Processing (De-Hydration, Sweetning etc), H.P & Waste Gas Compressors, Wellhead Operations [Well Testing, HY Panel Operations, SCSSSV Function Test, Well Activation] Completion, Workover, W/L

Civil engineer with 17 years experience

Skilled Production Technician

Technical Sales manager - Electrical Engineering

First Prev 51 52 53 54 55 56 57 58 59 60 61 [ 62 ] 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out