CONTACT INFORMATION:
View contact information...
SUMMARIES of PROFESSIONAL
Over 13 years of extensive exposure in domestic and international oil and gas industries including:
- Provided technical directions and managements in areas of reservoir development & production engineering as senior reservoir/exploitation engineer while serving for Teknica Overseas Ltd., Teknica Petroleum Service Ltd., United Oil & Gas Consulting Ltd., Ivanhoe Energy Inc. and PetroChina (CNPC)
- Conducted and skilled at reservoir management and pressure surveillance, development planning and infill drilling strategy, reservoir engineering analysis & study, PI and PTA test, petrophysics interpretation, production log analysis, integrated study and simulation in waterflood and EOR (steam injection and miscible flood), history matching, horizontal wells, economic evaluation, production decline analysis, core and fluid property evaluation
- Experienced in artificial lift system and production optimization designs, well production prediction and vertical flow performance analysis (NODAL Analysis)
- Consulted services in well productivity evaluation, perforation analysis, workover and completion design
- Experienced in Geoquest (Eclipse, Weltest200, Peep, OFM, Petrel), Landmark (ARIES), CMG, SSI, Saphir, Pansystem, MATBAL, AWP2000, Exodus, Fekete, SMART, PC & Work Station
EMPLOYMENT EXPERIENCE
Senior Reservoir / Exploitation Engineer, Teknica Overseas-Mexicana Ltd., Mexico
11.2003 to present
- Conducted reservoir problem diagnosis and secondary development plan designs for Jujo-Teco, Kup-Maloop-Zap, Cantarell, Eban-Panuco, Tamaulipas-Constituciones, Playuela, Pozo-Rica, Lankahuasa offshore and onshore oil and gas fields. On requirements of one week for one field, the key problems of reservoir managements and related studies for each field were diagnosed and important recommendations were conducted as well.
- Being conducting the integrated reservoir characterization and simulation studies for Jujo-Teco N2 injection and Tamaulipas-Constituciones CO2 flooding projects. Jujo-Teco is a deep fractured reservoir with fast water invasion from the small bottom aquifer. Fracture characterization and N2 injection design are the study objectives for the pressure maintenance and recovery improvement. Tamaulipas-Constituciones is a mature waterflooding multi-zone reservoir with poor flooding efficiency and low recovery speed. Improvement waterflooding recovery and then EOR of CO2 flooding are the main objectives of study.
- Conducted reservoir appraisal and reserve calculation for Kosni Offshore Gas Field, including core and fluid analysis, DST, PLT and MDT evaluation & interpretation conducted in highly deviated well, and GWC estimate.
- Worked on reservoir geostatistical modeling and simulation study for Lankahuasa Gas Offshore Field, including well test interpretation and core analysis, reserve calculation, development strategy and economic evaluation.
- Being working on exploration appraisal for an offshore field-heavy oil fractured reservoir, Kayab-Tunich, including drilling and formation testing, core analysis, fracture characterization, reserve calculation and economic evaluation.
- Being working on reservoir integrated study and development planning of offshore field KMZ, including production diagnoses and performance evaluation, simulation modeling and gas injection development plans.
Project Engineer & Senior Reservoir Engineer, Teknica Petroleum Ltd.,
Calgary 10.2002 to 10.2003
- Responsible for the reservoir integrated study, field performance evaluation, simulation study and waterflood development plans for Masrab Oil Field, including independent technical decisions in planning, organizing and conducting required reservoir engineering work, team management, report writing and presentation
- Created new reservoir model with integration of reservoir engineering studies, which improved the previous model through redefinitions of fault properties, vertical / areal communications, injection-production patterns and separate aquifers
- Carried out analyses on data obtained from well and field tests, logs and production logging in order to define well and reservoir parameters, such as reservoir permeability, reservoir pressure, formation damage, well productivity and injectivity index.
- Worked on integration of pressure test and PI results with geological and geophysical models where pressure survey, DST, RFT and MDT data were analyzed against geological and geophysical model to make judgments on flowing unit continuity, fault sealing, reservoir depletion and oil water movement
- Integrated all available data for reservoir characterization and set up the in-house simulation model. Conducted in-house reservoir simulation work to history match production performance, evaluation of opportunities for production enhancement, optimization of the development plans, economic evaluation and other reservoir management issues, including single well model and 3D simulation model.
- Completed IPR and NODAL analysis, production decline and optimization, material balance calculation, reserve estimation and aquifer influence analysis
- Finished well completion, perforation & workover evaluation, petrophysics log and PLT interpretation
- Conducted water analysis, special & routine core analysis, PVT calculation
Senior Reservoir Engineer, United Oil & Gas Consulting Ltd.,
Calgary 08.2001-10.2002
- Responsible for many geological & engineering integrated studies and development strategies of oil and gas fields for a lot of companies including BP, AEC, Devan Canada, Burlington, Trans World and Prime West Energy
- Finished the pressure survey and production decline analyses, well test & logs interpretation, fluid properties, material balance, reserve calculation, simulation & history matching, injectivity and productivity analyses, potential well location and development strategy designs for Boundary Lake Oil Reservoir, Canada
- Completed petrophysics interpretation, geological integrated modeling and numerical simulation, history matching, horizontal well development designs for Elswick Oil Reservoir, Canada
- Analyzed development performance, pressure survey and modification, grouping management of production wells, PVT analysis, deliverability test, material balance, reserve calculation, infill / potential well design including horizontal well, performance prediction and economic evaluation for Cranberry-Slave Point Gas reservoir, Canada
- Finished the integrated geological and engineering study, log interpretation, PVT and core analysis, average pressure calculation, material balance analysis, geological modeling and numerical simulation, history matching, water corning control, recompletion design, new well placement and performance prediction, recovery factor calculation for the Kotaneelee Fractured Gas Reservoir, Canada
- Completed the integrated study of geological & engineering, infill development designs, fractional flow and Voidage displacement analyses for Mitsue GilWood Oil Reservoir, Canada
- Studied facies distribution and reservoir characterization of flow & storage capacity for Ladyfern Gas Reservoir, Canada
Reservoir Engineer, Ivanhoe Energy Inc., Calgary 04.2000-07.2001
- Estimated hydrocarbon recovery factors including for new fields without production histories
- Simulated and evaluated the waterflood development of complex & multi-layered reservoirs with low permeability
- Analyzed well test and production logs in pilot project, designed and evaluated performance of fracturing / perforating stimulation
- Designed and managed the infill development of water flood for faulted reservoir
- Completed the development performance analysis and economic evaluation for the pilot development field
- Devised reservoir tests, production logging and well test programs including gauge specifications, flowing periods and shut-in time and the preparation of reservoir/surface sampling requirements.
- Reviewed the reservoir engineering work performed by external consultants and provided feedback.
- Did production performance analysis, history matching and fluid property analysis
Senior Petroleum Engineer, PetroChina, Beijing 01.1995-12.1999
- Initiated and implemented various industry projects and their evaluations on various reservoirs, including low permeability, blocked, multi-layered, heavy oil and depleted oil and gas reservoirs
- Initiated and participated in defining requirements for operations such as well tests, production logging, sampling and PVT analysis and SCAL, etc. in liaison with operations staff
- Finished reservoir engineering, development optimization, numerical simulation and history matching, production forecast and economic evaluation of many water floods in Shengli, Liaohe, Xingjiang, Huabei Oil Fields
- Implemented the infill developments of water flood and EOR projects for faulted, low permeability sandstone reservoirs in Dagang, Liaohe Oil Fields
- Did OGIP estimation, perforating design, deliverability test and AOF calculation, material balance analysis for Sichuan Fractured Gas Reservoir and Terim Gas Field, including the PVT analysis of dry gas and condensate
- Worked on special log program design such as RFT and MDT for pressure measurements and fluid sampling purposes in multi-layer reservoir
- Completed well productivity evaluation, fracturing design and analysis, artificial lift design and optimization, workover and completion design, single & multi-phase studies, pump performance and production logging analysis
- Optimized water flood performance for a depleted reservoir through interpreting well test data and evaluating pressure and production data
- Designed the economical optimization system of reservoir development, injection network, injection & production tubing, artificial lift and pipeline network for steam injection development oil fields
- Designed SAGD development in thick heavy oil reservoirs for Liaohe Oil Field
- Conducted and Operated the reservoir performance for the steam flood development of Qi - 40 Block, Liaohe Oil Field
- Consulted in a variety of EOR projects, including thermal recovery and miscible flooding, pressure and heat loss calculation, steam injection profile and production logging analysis (4-parameter Tool)
Engineer, Liaohe Oil Field, Liaoning 07.1992-12.1994
- Analyzed production data and reservoir performances
- Did cross section map and sand distribution contour for reservoir development, reserve calculation, and prepared reservoir database for field development
- Did production logs interpretation, including DST data analysis, dynamometer survey, hydrometer and flowmeter test
- Designed well completion, sands control & treatment, gravel packing, artificial lift, production tubing in horizontal wells and directional wells
- Studied reservoir heterogeneity and its effects on fluid flow in reservoir
EDUCATION
- PhD. in Petroleum Engineering at Southwest Petroleum Institute, P.R.China
Dissertation: Multiphase Flow in Horizontal Wells 1992
- MSc. in Mining Engineering at University of Chongqing, P. R. China
Dissertation: Rock Mechanics and Fracture Characterization 1988
- BSc. in Mining Engineering at University of Chongqing, P. R. China 1985
PROFESSIONAL HONORS
Designated as registered Professional Engineer in Canada (M69314), 2002
Member of SPE and AAPG
Awarded as an Excellent Service Engineer in PetroChina, 1997
Employed as a Senior Engineer in China Nation Petroleum Corporation, 1994
ADDITIONAL INFORMATION
International Experiences
- Oil and gas development projects in Canada
- Heavy Oil Recovery Technologies of China in Romania
- Steam injection development for Lanwa Oil Field, India
- Water-flood development project for Masrab Oil Field, Libya
- Deep water offshore oil and gas projects, Mexico
Personal Attributes
- Excellent oral and written communication skills
- Skilled at computer systems and software
- Team worker, motivated, creative, reliable and honest
- Enjoy outdoors and relocate
REFERENCES: Available upon Request
View contact information... |