Resume - I have worked as a Driller and Tour push for the last 27 years.

Misco Jobs

Resume #16411

CONTACT INFORMATION:
View contact information...

Human Resources

Dear Sir / Madam,

Currently I have 27 years Oilfield experience and have been employed in Canada since 1977 and Overseas since 1997 in countries as Tanzania, Yemen, Nigeria and Kuwait.
My experience is as follows: The types of rigs I have worked on are: Top Drive, Land, Barges, Diesel Electrics, and Conventionals. Some of the draw works I have worked with are: 914 Unit, 712 Unit, 1320 National, 610 National and Oilwell E3000. The depths I have drilled have been from 5000 feet to 15000 feet. I have experience in Top Drive operation, Drilled over 500 Directional Wells, Working with Snubbing Units, Fishing Tools and attained Well Production.
Enforcing Safety Policies and crew training are my top priorities. I have supervised and organized Rig moves. I have supervised and worked with crews of 5 to 15 men, including Rig Employees, Electricians, Mechanics, Crane Operators, Forklift Operators, etc.
All my International Tickets and Certificates are currently valid and up to date and I now have successfully completed the courses required by Canadian Laws, which are the following:

Certificates
ST. John's 1st Aid for Alberta and British Columbia
Safety Management Well Site and Regulatory Awareness
2nd Line Well Control Supervisor
Top Drive Course
Boilers - A - 36337
H2S Alive
T.D.G.
W.H.M.I.S.
S.T.O.P.
Rig Electrical
I.W.C.F. #22601
Rigging & Slinging

AWARDS
Record Bit Runs
Performance Awards
Safety Awards with C.A.O.D.C.
250 days 1988
500 days 1991
500 days 1989
750 days 1993
250 days 1990
1000 days 1994
1250 days 1995

I have utilized exemplary leadership, time management, critical thinking/analysis, problem resolution, written/verbal communications and human resources management skills to plan and schedule duties in my field. I would like to work with First Nations People as my wife and son are Metis. I am also willing to travel overseas to work international.
I am applying for a position as a Well Site Supervisor or anything else you may be able to offer me because I believe my background provides the skills your company requires and I would welcome the opportunity for a personal interview to further discuss my qualifications. I am prepared to go work immediately, already owning my own Limited Company, company truck, laptop, computer, fax machine, cell phone, Liability Insurance and current valid passport.
I look forward to hearing from you in the near future to schedule an interview at your convenience. I hope to learn more about your company's plans and goals and how I could contribute to its success.

EMPLOYMENT HISTORY
Driller
Parker Drilling (KDC) – Kuwait July 04- present
Driller- Night Push
Parker Drilling-Nigeria Nov.01- July 04

Rig Manager
Nabors Drilling International - Yemen March 97 - Nov 01
Driller
Ensign Drilling Dec. 95 - March 97

Driller
Can-Tex Drilling Oct. 94 - Dec 95

Driller
Beaver Drilling May 85 - Aug 94

Driller
Simmons Drilling June 81 - May 85

Tour Push
Sparton Drilling Jan 81 - June 81
Mudman
Imco Drilling Fluids Oct. 79 - Dec 80
Derrick, Driller
Westeburne Drilling - Loffland Drilling May 77 - Sept 79

References
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4301 to 4350 of 9785)

Go to Search Parameters...

Brief Description

Good relationship with the work friends, easiness of creating friendships, taste of reading, to fish and to do pictures for besides practicing soccer.

I have worked as a Driller and Tour push for the last 27 years.

Coded pipe & pressure vessel welder with valid certification

Construction superintendent/construction manager

Automation, control engineering in industrial plants

Area Maintenance Static Supervisor

SCM Logistics and Materials Managment

Marine Electrical with electronics & Automation Exp. (off - shore, Oil Rig, FPSO, Drill Ship, OSV) 21 years exp.

Have a Bachelor Degree in Instrumentation and Control Engineering with Eleven years experience in the field of Industrial Automation, Nine years of experience in Engineering of Yokogawa DCS and Integration of DCS with other Process Automation Systems.

Over twenty-six years experience in the Oil Industry. The last sixteen years involved in pre-commissioning, commissioning, startup, and continuous operation

Journeyman Pipefitter, Journeyman Gasfitter (Class GB-00018470), Journeyman Plumber - Red Seal (IP #M-16-00616) Since starting my apprenticeship in 1988, I have gained experience in many aspects of the mechanical trade, such as construction, shut-downs, and maintenance...

Am a fresh directional driller with background in well planning and borehole survey, i have ten years experience in various drilling position.

*17 Years In Methanol/Ammonia Production *Control Room Operator (DCS/PLC) *Supervisory Experience *Computer Literacy *First Response/Firefighting Experience *Safety Committee Member *Training Of Junior Personnel *Startup/Commissioning Experience

Automation engineering experience in oil and gas sector. Programming experience Hardware and software knowledge

Chemical Engineer with 11 years Experience in Process Engineering, Production in chemical industry

Job Objective To pursue a career with a major international industry. The position should offer career opportunities, expansion of knowledge and an immediate challenge

3 years experience in Hook Up, Commissioning and Major Topside Maintenance. Skillful in using Primavera Project Planner to do Planning and scheduling for Projects.

PDS Piping Designer

Objective: To work as a mechanical engineer and assist with research, problem solving, design and troubleshooting for continuous innovations technology.

Lead / principal instrument engineer, technical equivalent of a Bsc degree in Electrical engineering. My experinece in brief :14 yrs Petro-chem, 5 yrs Mining, 2 yrs Paper,4 yrs Beverages, 1 yr Smelter, 1 yr Boilers, 1 yr Power, 8 yrs Nuclear

pha,hazop,pfd,p&id,sop,aspen.htri

I have completed Dual Degree (B. Tech. + M. Tech.) in Chemical engineering from IIT Bombay. I believe I can deliver pretty good results while working in a technical position which also requires a mix of management and people skills. An application of chemical engineering while working towards inc

9 year directional driller with broad experience in many types of wells

Ms-Office,Data Base Oracle

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

13 years Completion/Workover experience. Completion, sand control, fracturing, matrix acidizing design. Extensive project management experience including three assignments in operator's offices. Operations and engineering management experience.

Promote practical safe-work practices and HSE issues awareness on an offshore facilty.

Mecahnical,Piping,Fire Safty Engineering

Total 4+ years experience in chemical, Petrochemical, Specialty chemical, involving duties such as smooth running of the plant preparing daily/monthly report, achieve the production target, Yield and improving Quality with in safety ,ISO 9001-2000 Standards

GEOPHYSICIST WITH 1 YEAR EXPERIENCE ,I N E& P INDUSTRY

Working as a Petroleum Geochemist in Environmental Soil Sciences and Petroleum Geochemistry Labs in NCE in Geology, University of Peshawar

Microsoft Window.Autocad

Exposure to various oilfield drilling tools, their manufacture and repair,Knowledge of various rotary shouldered connections, connections like VAM,EUE,PH-6,NSCC,NSCT etc, Knowldede of Gauges, Setting and gauging practices, Documentation as per API/ISO standards, Involment in Internal Audits, Product

I find my self a good comunicator, good organisational and have basic knowledge of offshore safety laws, aslo i have excellent computer skills and english language.

Electrical Engineer, Hardworking, punctual, achievement oriented, self-Learning, dependable, project manager

MBA in finance and b.com (accountin+managment)

Experience in LVL,UPHOLE and working as a field engineer field

A young and dynamic mechanical engineer with 3.5 + years in depth experience in operation of Coal based thermal power plants of 427.5 MW equipped with PF Fired boilers.

Experience in HPHT well completion, Single Trip Multizone Gravel Pack, Expandable Sand Screen completion, well testing, slickline

Control and instrumentation Instructor

Mudlogger, data engineer and geologist

Electronic technician

An experienced hydrographic Surveyor and an experienced Engineer having substantial expertise in project monitoring in the field of surveying using GPS, and Mapping Software.

„«Instructs personnel in the proper safety response to emergency situations, alarms, and gas-to-surface conditions.„« Installation and Commissioning of the H2S detectors, combustible detectors and gas monitoring systems.„«Demonstrate the H2S alert training and practical training of the donn

Hands on experience in Vibration Monitoring & Analysis of Plant Rotating equipment by the use of SKF Microlog 60 with SKF Prism4 1.35 & SKF Machine Analyst 2.2 vibration analysis and data management software. Familiarity with the data base creation, modification and report preparation using SKF MA

Senior AutoCAD and Microstation Drafter

POSITIVE ATTITUDED, HARD WORKING

I have worked in the oil & gas drilling industry for over 19 years and possess a unique blend of experience and knowledge of how the industry works.

I have a post graduate degree in Petroleum and Gas Engineering; while preparing my thesis based on secondary oil recovery (Niger Delta),I work in collaboration with SPDC Nigeria. They provided me with data.I have skills also in drilling Engineering in areas of casing design and mud Engineering.

Electrical Engineer with experience in Engineering,Procurement and Construction

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 [ 87 ] 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out