Resume - 14 years Experiences in welding inspection, quality assurance and quality contro...

Misco Jobs

Resume #16842

CONTACT INFORMATION:
View contact information...

EXPERIENCE SUMMERY
- Perform Visual Inspection and Non destructive testing / surveys to identify the potential problems and determines causes and possible remedial actions
- Coordinate with construction / operations and maintenance to schedule inspection activities
- Carryout material inspection to ensure conformity with appropriate construction codes
- Supervise inspection programs and prepare, review / evaluate inspection reports & test results also develop recommendation of required work to avoid reduction in operating parameters
- Identify & report Non-conformities to specified requirements. Verify agreed corrective action
- Conversant with international codes & standards and carryout work to client's specification in accordance with ISO quality systems
- Preparation / approval of WPS for piping / pipeline and witness PQR / WQT
- Prepare QCP according to the project specification.
- Preparation of QA/QC documents, test packs and final submission to the client for approval
- Experience in preparing packages and provide inspection coverage for Hot tap welding work hot/cold tie-in work
- Welding inspection and monitor the process
- Inspection for surface preparation and painting inspection as per specification
- Conduct holiday inspection for under ground pipe coating/wrapping
- Verify alloying element by Positive material identification test(PMI),
Ferrite content test
- Tank floor inspection for possible underneath corrosion by MFL methods
- NDT report evaluation, Plan & assign work to NDE personnel in accordance with approved procedure and to extend specified in the contract.
- As built drawing preparation, Documentation of inspection activities and dossier submission.

QUALIFICATION
- CSWIP 3.2 Welding Inspector from TWI UK
- B GAS painting inspector grade 2
- CWI-Certified Welding Inspector from AWS
- ASNT Level 2 in UT,RT,MT & PT methods

EDUCATION: Diploma in Mechanical Engineering

TRAINING: MFL Tank floor inspection by m/s Silver wings ltd. UK
Visual Inspection Program by Indian society of NDT
ISO Lead Auditor training program
Computer Skill: Working knowledge in MS Office

EMPLOYMENT DETAIL
1. Zainal Daud Sdn.Bhd, Brunei,
From September 2005 onwards working as a senior QA/QC Inspector
Client: Brunei Shell Petroluem
2. Velosi. Oman
From December 2003 to June 2005 working with (PDO) Petroleum Development of Oman on QA/QC service contract.
- As a PDO representative monitor the contractors daily activities in compliance with quality and safety, implementation of the quality surveillance program in new construction and modification of existing facilities such as well hook up piping, flow line & gathering stations
3. Galfar Engineering & contracting llc. Abudhabi, UAE
From October 2002 To June 2003
Client: Abudhabi company for onshore oil operation (ADCO) Asab field
4. LG Engineering & Construction Corp., Kuwait
From march 2001 To February 2002
Project: New Gas oil De-sulphurization (New GOD), KNPC, Kuwait
5. Emirates Industrial lab. Dubai, UAE
From September 2000 To February 2001
Deputed to Kuwait Industrial Refinery Maint. & Engg. Co (Kremenco) Kuwait
Project: Kuwait National petroleum Company (KNPC). Mina al ahamadi refinery, Kuwait
6. Ndt & Corrosion Control Services, Abudhabi, U A E
From January 2000 To April 2000
Client: Abudhabi gas company (ATHEER)
7. Al-Mutawa Samyong Ndt.Co.ltd, (AMSYCO) Dhahran, Saudi Arabia
From August 1995 To December 1998
Assigned as a multi discipline Inspector to Saudi Arabian Oil Company (SAUDI ARAMCO) Pipeline operation inspection Division, Dhahran
8. Emmen Engg. Works Mumbai, India
From January 1991 To August 1995
9. Hindustan Ferodo ltd. Mumbai, India
From October 1989 To October 1990

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8651 to 8700 of 10816)

Go to Search Parameters...

Brief Description

Motivated versatile professional, with 12 years experience as company representative and Application Drilling Engineer Degree,, within the Major Oil Companies in ALGERIA (drilling division SONATRACH). Team player, with solid interpersonal communication skills and strong commitment to success.

Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.

Electrical PDs Designer. Having knowledge of Microstation, Autocad And EERaceways.

Iam having five years exp in oil and gas field of hydro treater and Integreated offsite plant

Graduated Chemical Engineer trained in refinary and petroleum institute

QUALIFICATION: Completed B.Sc in Petroleum Engineering securing Grade A+ from University of Engineering and Technology Lahore, Pakistan. Presently studying in MSc.Petroleum Engineering at Norwegion Univrsity of Science and Technology SOFTWARES: Eclipse-100,Gl-View,etc.

Site investigation, Design of Foundation, Design of Embankment and Retaining Structures, Slopes Stability, Numerical Analysis, Constitutive Modelling, Contaminated Land Remediation, Ground Work Supervision, Mining Engineering, Total Station and Precise Level Surveying.

Power electrical engineer from Aleppo university

Process Engineer with 9 years' varied oil + gas experience (consultancy, operations support and design; both onshore and offshore) in London/ Aberdeen/ Perth, seeks interesting opportunities in Arabian Peninsula

14 years Experiences in welding inspection, quality assurance and quality control, NDT inspection and documentation with major middle east oil companies. Qualification: Diploma in Mechanical engg, CSWIP 3.2, BGAS Grade 2, NDT level 2 in 4 methods

Welding inspector with 4 years experience in welding QA/QC

Piping engineer currently working with Bechtel India Pvt Ltd. I am having a 2.6 year experience as piping engineer/ PDS administrator.

More than 10 years of Information Technology and Customer Services experience, Technical support across multiple industries, including Sales, Transportation, Oil Technologies and Services and Outsourcing Services. An intermediate level in English, effective in formulating and deploying alternative

Caterpiller Trained Heavy Diesel Fitter with open cut and underground Experiance on Caterpiller, Tamrock, Leiberherr equipment

Diversified: Nuclear Power Clearance /Mechanical/Electrical/Civil/Architectural/GIS Map/Water Design

31 yrs im field. I have ben an Electrical Field Engineer For a long time

I am a GRADUATE MECHANICAL & CERTIFIED COST ENGINEER possessing 20 years of diversified experience in Petrochemicals, Refining, Chemical, Fertilizer, Oil & Gas with various multinational companies in Pakistan, Bahrain & Saudi Arabia in the fields of Project control, Cost & Contract Management, Plant

I have worked as a Tour push onshore Venezuela and as a driller offshore Qatar. I am now working as a drilling consultant here in Canada.

Administration , Accounting and Human Resource experience

Construction manager/Chief field engineer with HND Mechancial engineering and Member Institute of Mechanical Engineers. 18 years of construction management experience at all levels.

Young Reservoir Engineer with 4+ years of experience. Areas of expertise include: PTA, reservoir simulation, waterflood management, sand management, naturally fractured reservoirs, calssical RE methods, etc.

Electrical Designer, Oil & Gas.

My key strength includes communication, interpersonal, analytical, creativity, troubleshooting skills and quick problem solving ability. CAD skills include AutoCad, SolidWorks, Catia V5

Broad-based experience covering a full spectrum of health safety and environmental services, including, Environment and Earth Resource management, and experience in administration and consulting. Knowledge of environmental tools: life cycle analysis, environmental impact assessment and HSE

Around 2 years of experience in HR activities with expertise in Human Resource, Personnel Management, Public-Client Relations, Administration, Customer Service and ability to deal with Multicultural People.

Steel Worker, Machinest, Inspector,Hardworker

Key Qualifications: Engineer with skills in site management, project management, project sales, business development, oil&gas/marine control application implementation

PIPE DESIGNER, More than twenty-five years experience in Technical drafting, piping and equipment hands on field work in the Chemical Manufacturing environment.

I had completed my B.E. & DIPLOMA in mechanical engineering. I followed through 2 major projects, seminar, industrial training, national level paper presentation & visited number of power plants, companies which are specially related with mechanical field.

Skillful in instrument field devices like transmitters & positioners & control valves & switches speed and vibration sensor.

Logistics and Supply Chain Management, Well, organized, Good Communications, P/L and Budgets, Remote Site setup and management, Warehousing, Maintenance, Procurement and subcontracts, Transportation, Multi-cultural environments, Management of multi-locations.

Experience has been gained operating from supervisory, management and design standpoints on a variety of E&IC contracts within the U.K. and overseas.

PhD chemical engineering, 15 years experience as operations and academic teaching

Hand on mechanical device

Derrickman with Strong Petroleum Engineering education background.

Very Good Computer Skills

I am a fresh graduate student from Petroleum Engineering Department, Bandung Institute of Technology with GPA 3.43 (scale 4.00). I learn much about some Enhanced Oil Recovery methods.I am also active in some organizations where I gained my experience in how to interact with other people.

Recent graduate

I am a BSc in Geochemistry (where I got the first gradution possiton of six students) and actually I am getting a Diploma in Organic Geochemistry (holding and average of 18/20 points) at Universidad Central de Venezuela

mechanical- maintenance- operation- project skills in multi descipline

Geologist, mud logger

* Driller 3 - supervising/training drillers (diamond drilling - land) * 6 yrs experience * Experienced FIFO * Excellent safety record * excellent organisation skills * strong work ethic * always willing to learn more

Professional Goal *********************************************************************** Contribute to a firm whose clients will benefit from my strengths in enhancement, engineering analysis, product development, performance bench - marking, and other organizational enhancements.

I aim at working as a fresh-graduate chemist or a laboratory technician at an entry level in a chemical, food, pharmaceutical, oil or related companies and industries.

I would like to find an opportunity in an auditing field. I think i can be qualified to fill this position. I participated in ACCA to increase experience and to expand knowledge. Finally i believe that self development and self initiative are the basis to move forward.

I am a new graduate of Mining Engineering from Nottingham University this summer. I am seeking employment in the mining or petroleum sector, and am willing to consider anything that will challenge me or give me a solid skill base.

To find work as a Certified Journeyman Millwright, with Inter Provincial Red Seal

I am final year student of Indian Institute of Technology(IIT) Delhi. I am doing my B.Tech. in Civil Engineering and looking for working with a growth oriented global organization that provides an opportunity for continuous learning, Challenging work, diversity and development.

Willing to work in any environment and a job in which i can build experience for future and better job.

I am a high technician in gas exploitation (plant operator), I am working now for BP in Algeria at in salah gas. I will accept all regions.

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 [ 174 ] 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out