Resume - Senior Piping Designer CADD

Misco Jobs

Resume #16954

CONTACT INFORMATION:
View contact information...

SENIOR PIPING DESIGNER / CADD

EDUCATION;
- ONC;(MECHANICAL ENGINEERING)
- HNC;(MECHANICAL ENGINEERING)

COURSES;
- INTERGRAPH MICROSTATION PDS 3D, MW.KELLOGG, HOUSTON, TEXAS
- AUTOCADD PROPIPE, UNIVERSITY OF TEXAS, HOUSTON, TEXAS
- REBIS AUTOPLANT, SNC.LAVALIN, CALGARY

WORK HISTORY

2003- BANTREL
CALGARY
CANADA
SENIOR PIPING DESIGNER/CADD

Petro-Canada(Sulphur in gasoline project
Layout,design of interconnecting piperacks(AUTOPLANT

Encana Canada
Project scope and Plant layout for SAGD Heavy Oil Recovery plant at
Christina Lake.(PDS)

Suncor Energy
Plant layout and detail design for Sulphur Recovery area at Millennium Coaker Unit Fort Mcmurry. (AUTOPLANT)

2002- 2003 HALIBURTON-KBR
MONTERREY MEXICO
SENIOR PIPING DESIGNER/CADD

Exxon Beaumont Texas (Low Sulpur Mogas Project)
Design Supervision & Quality Check of locally produced
PDS Production Models & Isometrics

2001-2002 SNC.LAVALIN
CALGARY
CANADA
SENIOR PIPING DESIGNER/CADD

Petro-Canada (Sulphur in gasoline project)
Layout,design & production of high pressure exchanger area using Rebis cadd system.

2000-2001 BANTREL
CALGARY
CANADA
SENIOR PIPING DESIGNER/CADD

Shell Canada(Athabasca oil sands downstream project)
PDS production and checking of various areas within tankfarm.

1999-2000 FLUOR DANIEL
VANCOUVER
CANADA
SENIOR PIPING DESIGNER/CADD

Morenci Mining(Arizona)
Layout of tankfarm area for electrolyte storage & recovery associated with large scale copper mine.
PDS modeling of piping in tankfarm area.

1995-1999 MW.KELLOGG
HOUSTON
TEXAS
SENIOR PIPING DESIGNER/CADD

EXXON Chemical Co(Singapore)Ltd
Plot design and PDS plant layout & modeling of distillation structure.
SHELL Chemical Co(Geisma/Louisiana)
Design and PDS modeling(Electric revamp) of PTT Polymer plant.
ARCO.Chemical Co(Chanelview Texas)
PDS modeling of supplemental "CB" column area.
EXXON Chemical CO(Baytown.Texas)
Manual design and PDS modeling of Flare and Knockout area.
Manual design and PDS modeling of Loadout structure for Polypropylene plant

1992-1994 MW.KELLOGG
HOUSTON
TEXAS
SENIOR PIPING DESIGNER

MARVIN Oil CO(Venezuela)
Layout, production design and checking of Flare & Knockout areas for major refinery upgrade.
SHELL Oil Co(Baytown.Texas)
Plant layout and design of several areas associated with a grass roots Ethylene Glycol plant.

1988-1992 HA.SIMONS
VANCOUVER
CANADA
SENIOR PIPING DESIGNER/GROUP LEADER

CELGAR PULP Co(Castlegar)
Checking of piping arrangements and isometrics relevant to the installation of an Eka-Nobel SVP Chlorine Dioxide generator.
MACMILLAN BLOEDEL(Powell River)
Conceptual design to final engineering and construction of tankage and bleach plant modifications required for the installation of a Chlorine dioxide module.
HOWE SOUND PULP & PAPER LTD(Port Mellon)
Equipment layout,piping arrangements and site verification of chemical preparation and unloading areas required for the installation/hook up of R8 module

1985-1988 WORLEY(UK)LTD
LONDON
ENGLAND
CADD PIPING DESIGNER

Intensive "Computervision" training course: Production work using plant design software on conceptual design of major north sea gas gathering complex.Production of 3D deck layouts and piping model for wellhead and separator areas.

1984-1985 CONOCO(UK)LTD
LONDON
ENGLAND
PIPING DESIGNER

Conceptual design study of topside facilities for southern north sea gas gathering development. Initial modularization studies and project work for the upgrading of existing onshore facility.

1982-1985 BAHRAIN PETROLEUM COMPANY
BAHRAIN
SAUDI ARABIA
SENIOR PIPING DESIGNER

Design and construction supervision of LPG storage and transfer facility. General refinery maintenance and construction.

1981-1982 PARTEC LAVALIN
CALGARY
ALBERTA
SENIOR PIPING DESIGNER

Piping design and checking of Natural gas train and Sulphur recovery plant(Hanlan Robb)

1980-1981 BAHRAIN PETROLEUM COMPANY
BAHRAIN
SAUDI ARABIA
SENIOR PIPING DESIGNER

General refinery engineering,design,construction and maintenance.
Production engineering for transfer piping and compressor station

1979-1980 BROWN & ROOT/NPC JOINT VENTURE
OSLO
NORWAY
SENIOR PIPING DESIGNER

Drawing and checking of compressor module,emergency generation module and fire protection module. Preparation of Hook up spools(Statford B)

1978-1979 NATRON
RIO de JANEIRO
BRAZIL
PIPING DESIGNER/CHECKER

Checking of arrangement drawings for Lurgi fertilizer plant and Nuclebas sulfuric acid plant.

1976-1978 C.J.B. (UK) LTD
LONDON
ENGLAND
PIPING DESIGNER

Checking of arrangement drawings and preparation of layouts for L.D.P.E. plant

1975-1976 MW. KELLOGG
LONDON
ENGLAND
PIPING DESIGNER

Design and checking of Compressor house (Ammonia plant)

1974-1975 DAVEY POWERGAS LTD
LONDON
ENGLAND
PIPING DESIGNER

Preparation and checking of piping arrangements associated with Gas treatment and terminal facility.

1973-1974 CATALYTIC INC
PHILADELPHIA
USA
PIPING DESIGNER

Checking piping isometrics and arrangements. Supervision of production of isometrics and arrangements.

1971-1973 FOSTER WHEELER LTD
LONDON
ENGLAND
PIPING DESIGNER

Preparation and checking of isometrics and arrangement drawings. Plant layout and design model making.

1966-1971 MW.KELLOGG
LONDON
ENGLAND
Piping Draftsman

Preparation of piping isometrics and general arrangement drawings. Plant layout studies and piping flexibility analysis. Checking of isometrics and arrangement drawings also design model making. Extensive site experience from Tie in to Start up.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4151 to 4200 of 10923)

Go to Search Parameters...

Brief Description

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

Presently working offshore China coast for the last 11 years. We have drilled & completed over 48 wells. Side tracked over half. We have drilled 8 ERD wells the furtherest is 9238m (with a horizontal displacement of 8063m June 1997) This is China record for "Deepest Measured Depth".

Contracts, Services Manager, Wellhead Maintenace, Integrity Engineer, Senior Well Engineer

I have been a cementing supervisor for Haliburton and Schlumgerger for over 20 years, I have worked mostly offshore, hpht, deep water, I have some land expierence, I am currently working in Yemen, I have a very good knowledge of all facets of cementing, tools, chemicals and equipment etc

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

Computer knowledge, documentation, teaching, research works and quick learner.

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Ngondi Bessala is a Senior geologist with more than 20 years experience as Exploration Geologist, Operations geologist and wellsite geologist with major companies Elf then Total, Conoco Phillips as consultant, with independants Perenco, Maurel & Prom, Addax Petroleum and CMS energy

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Good organizational & management skills and able to work in team environment and independently.

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

EHS Management Expert with 14+ years of Experience

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

My training as a professional Accountant, coupled with my three years on-hand experience as an ‘Finance / Operations Officer’. (B.Sc Accounting and PE II ICAN)

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

I am 42 years old and Master Degree, currently I am still working for Valeinco as Logistic Manager and I ahave many experiences in Project Management such as Contract Services Manager, Project Manager and Project Coordinator and with my experiences I am confidence to be one of your candidate/staff.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 [ 84 ] 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out