Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #1702 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATIONAL BACKGROUND
* Texas A & M University; Texas / U.S.A. Spring 99 - Fall 00
Mechanical Engineering, Graduate Program (Master of Science)
* Middle East Technical University; Ankara / TURKEY Spring 98 - Summer 98
Intensive English
* Kirikkale University; Kirikkale / TURKEY Fall 93 - Spring 97
Mechanical Engineering, Undergraduate Program

EXPERIENCES
10/2008 - present Site Manager (HRSG), INCO International FZ Co., Fujairah/United Arab Emirates
Project: Fujairah F2 IWPP (Independent Water & Power Project; 2000 MW Power & 130 MIGD Water)
Owner: Fujairah Asia Power Company (FAPCO)
Contractor: Alstom Switzerland Ltd. and SIDEM Consortium
Sub Contractor: INCO International FZ Co.
Plant Type: 2xKA26-2 MS and 1xKA26-1 MS CCPP + Desal
Scope of Work: Erection of 5 HRSG Units (Mechanical & Electrical).

Working as a Site Manager responsible directly to Project Manager.
My duties and responsibilities are as follows:

* Mobilization of Site and Camp Area
* Preparing the Manpower and Equipment requirements
* Direction and organization of 25 engineers (including construction managers) and ~500 workers (including foremen, crew and team leaders)
* Supervising the total construction effort to ensure that the project is efficiently and safely executed within quality, schedule and budget
* Interface with client representative and construction (sub) contractors
* Assisting the HSE team to ensure that safety plans and requirements are implemented and followed
* Assisting the business and project manager(s) in leading overall project and company objectives
* Supervising other managers who are responsible for logistics, HSE, administration, site resources, etc.
* Reporting to Project Manager and/or Home Office Designated Manager

*** won the "Safe Man of the Month (September 2009)" award
*** won the "Safe Company of the Month (July 2009)" award

06/2006-09/2008 Facility Manager, Binagadi Oil Company, Baku/Azerbaijan
Worked as a Facility Manager at Binagadi Oil Company (BOC), a production services firm in the oil and gas industry.
My duties and responsibilities were as follows:

* Direction and organization of 7 engineers and 60 workers (including foremen, crew and team leaders)
* Maintenance, repair, construction and erection of pipelines, storage tanks, pumps, compressors, separators, valves and sucker rod pumps
* Monitoring the contractor activities such as storage tank repairs, drilling location preparations and site road constructions
* Direction and organization of Daily Meeting with other disciplines
Also worked as Project Manager of the "Water Flooding Project".

09/2005-06/2006 Mechanical & Steel Group Chief, GAMA Al Moushegah Arabia Ltd., Jeddah/Kingdom of Saudi Arabia
Project: Shoaiba Steam Power Plant, Stage II, Phase I & II (6x367 MW)
Owner: Saudi Electricity Company (SEC)
Contractor: Alstom Power Inc (USA) and SARCO Consortium
Sub Contractor: GAMA Al Moushegah Arabia Ltd.
Worked as a Group Chief directly responsible to Construction Manager.

My duties and responsibilities were as follows:
* Direction and organization of 2 engineers, 130 steel erectors, 15 mechanical erectors, 15 boiler erectors and 15 pipe fitters (including foremen, crew and team leaders)
* Erection of GR (Gas Recirculation, 2 per unit), FD (Forced Draft, 2 per unit) and ID (Induced Draft, 2 per unit) Fans (total 6 per unit)
* Erection of Circulation Pumps (3 per unit)
* Erection of Condensate Pumps (2 per unit)
* Steel structure erection (including platforms, stairs, gratings and handrails) of boilers and Air Pre Heaters (APH) (~ 2350 tons per unit, total 3 units: phase I) + remaining steel, platform and stairs erection of Phase I & II boilers (6 units total)
* Steam Drum erection (~ 180 tons)
* Hoists Installation (9 per unit)
* Completion of Punch Items
* Shutdown works including boiler, piping and instrumentation

02/2005-09/2005 Chief Engineer, TPAO Turkish Petroleum Corporation, Ankara/TURKEY
Project: Kuzey Marmara & Deðirmenköy Fields Underground Gas Storage
Owner: Turkish Petroleum Corporation (TPAO)
Contractor: Lurgi AG – Fernas Insaat Consortium
Worked as Chief Engineer directly responsible to Construction Manager.
My duties and responsibilities were as follows:
* Direction and organization of 3 engineers and 30 technicians.
* Responsible for:
- Piping department
- Pipeline department
- Equipment erection (package units such as compressor units, HC dew point adjustment, dehydration etc.)

08/2001-02/2005 Project/Site Engineer, TPAO Turkish Petroleum Corporation, Ankara/TURKEY
Worked as Project/Site Engineer responsible to chief engineer at "Kuzey Marmara & Deðirmenköy Fields Underground Gas Storage Project".
My duties and responsibilities were as follows:
* Technical Committee Member for Contract Negotiations
* Checking and approval of calculations, design, manufacturing and erection projects of all process equipments
* Auxiliary Systems such as Drinking Water Treatment, Waste Water Treatment, Fire Fighting Systems, Water Supply etc.
* 3x10 MW + 5MW Gas Turbine driven Centrifugal Compressor Packages
* HC Dew Point Adjustment Unit
* Checking and approval of Pipeline Procedures (16"x13 km, 20"x3.5 km and 6"x1 km), Alignment Sheets and Crossings, also control the construction of pipelines
* Piping, Slug Catchers and Inlet Filters
* API and ASME Tanks, manufacturing & construction and hydrotests
* Checking and approval of design & construction projects and calculations of HVAC & Plumbing Systems also control the construction of the systems
* Control of Steel Structure Fabrication and erection
* Control of Process Equipments manufacturing, tests and erections
* Training of entry level Mechanical Engineers and technicians to adapt them to the project
* Preparing monthly "Activity Reports" to be submitted to General Directory of Petroleum Works
* Following up and translating of the "Monthly Progress Reports" that are submitted by the contractor
* Checking the "Interim Payment Certificates" that are submitted by the contractor and writing the payment letter to the Financial Department of Turkish Petroleum Corporation
* Translating the necessary documents of the project

02/2001-08/2001 Surface Facilities Engineer, Turkish Petroleum Corporation, Ankara/TURKEY
Worked as a surface facilities engineer at the International Projects Department
Training in Thrace Region Oil and Gas Fields (15 days)
Training in Batman Oil and Gas Fields, Dodan CO2 Production Process (45 days)
Training at Onshore Drilling for 1 week

09/1997-08/1998 R&D Engineer, STS Tesisat Armaturleri San. Tic. A.S., Kirikkale/TURKEY
Worked as R&D engineer at R&D Department
My duties and responsibilities were as follows:
* Creating 3D Models using AutoCAD14.
* Designing new products (valves) and machinery such as lathe.
* Direction and organization of 20 workers and an engineer.

Summer 96 Intern, STS Tesisat Armaturleri San. Tic. A.S., Kirikkale/TURKEY
Worked at manufacturing and R&D Departments
Worked closely with senior engineers to develop new valves.

Summer 95 Intern, TUPRAS Kirikkale Oil Refinery, Kirikkale/TURKEY
Attended Work Safety & Fire Fighting Training
Practical training about basic machine tools such as lathe in the workshop

Worked with engineers to start up steam turbines of Thermal Power Plant
**** From January 2001 to September 2005, I worked for Kardelen Engineering & Consultancy Company, which is our family company, as a Technical Consultant for Engineering, Energy and Oil & Gas Industry and worked part-time for the site works with the permission of my official company TPAO Turkish Petroleum Corporation. The followings are the site works which I worked part-time for the Kardelen Engineering & Consultancy Company:

09/2004 – 10/2004 Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/TURKEY
Project: 2004 year Engineering & Maintenance works of Kirikkale Oil Refinery
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company

Worked as Site Manager for the Engineering & Maintenance works of Kirikkale Oil Refinery during the Shut Down (S/D) and Battery Shut Down (BS/D) period.
Responsible for:
Direction and organization of 26 workers and an engineer for the equipment erection, piping, mechanical, civil, electrical works and hydrotests.

10/2002 – 04/2003 Deputy Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/TURKEY
Project: Naphtha Filling Platform
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company
Worked as Deputy Site Manager for the construction (including steel fabrication) of Naphtha Filling Platform at Filling Facilities of Kirikkale Oil Refinery.

08/2002 - 09/2002 Site Manager, KARDELEN Engineering & Consultancy Company, Kirikkale/TURKEY
Project: Reconstruction of Heating & Plumbing System
Owner: Turkish Oil Refineries Corporation (TUPRAS); Kirikkale Oil Refinery
Contractor: KARDELEN Engineering & Consultancy Company
Worked as Site Manager for reconstruction of Heating & Plumbing System of the Kirikkale Oil Refinery's Apartment Complex.

08/2002-04/2003 Technical Consultant, Guneygaz Corporation, Kirikkale/TURKEY
Worked as Technical Consultant for Engineering, Oil & Gas and Energy Industry.

SKILLS
Hardworking, dedicated and resolute to take responsibility. Strong analytical thinking ability, communication skills, ability to work under pressure and capability of motivating others.

* Knowledge of PC, advanced user of Microsoft Applications and comfortable working with the following programs:
AutoCAD, ANSYS, Pro/E, ALGOR
* Hands on Experiences on Powder Processing

TECHNICAL TRAININGS and CERTIFICATES
* Working at Height Training; 07/10/2009 (Fujairah, U.A.E.)
* Fire Fighting Training; 19/06/2009 (Fujairah, U.A.E.) (have a certificate)
* First Aid Training; 12/06/2009 (Fujairah, U.A.E.) (have a certificate)
* Confined Space Training; 15/05/2009 (Fujairah, U.A.E.) (have a certificate)
* Training Course on Centrifugal Compressor for Operation and Maintenance; 15-17/03/2005 (Siemens AG; Duisburg, Germany) (have a certificate)
* Training Course on Gas Turbines for Operation and Routine Maintenance; 07-11/03/2005 (Solar Turbines; San Diego, USA) (have a certificate)
* CNC programming; Spring 1996 (1 term course and 1 week special practical training at Steel Factory of Mechanical & Chemical Industry Corporation (MKEK), Kirikkale/TURKEY)
* Pneumatic Training Course; 10-16/06/1996 (KOSGEB; Ankara/TURKEY) (have a certificate)
* Aeromodeling Beginning Course; June 1990 (Turkish Aeronautical Association, Areomodeling School; Ankara/TURKEY) (have a certificate, B)

ACTIVITIES
* 2002-present; Charter Member & First President of Turkey A&M Club
* 1999-present; Member of ASME
* 1997-present; Member of The Union of Chambers of Turkish Engineers and Architects (UCTEA) Chamber of Mechanical Engineers
* 1999-2000; Member of Trap & Skeet Club at Texas A&M University
* 1999-2000; Member of North American Fishing Club
* 1999-2000; Member of North American Hunting Club
* 1999-2000; Member of National Rifle Association

AWARDS
* won the "Safe Man of the Month (September 2009)" award
* won the "Safe Company of the Month (July 2009)" award
* Best fourth undergraduate degree: Mechanical Eng. Dep. of Kirikkale University, Kirikkale/TURKEY

SCHOLARSHIPS
* 98 – 00; from Turkish Petroleum Corporation (full scholarship to pursue a MS degree in USA)
* 93 – 97; from Turkish Ministry of National Education (full scholarship for undergraduate degree)

CREATIVE PRODUCTS
Thesis
* Ertekin, A. "Effect of Doping in Bi-Sr-Pb-Ca-Cu-O Superconductor Composites", Master Thesis, Texas A&M University, U.S.A. (2000)
* Ertekin, A. "Material Separation and Transportation by the Pneumatic Systems", Undergraduate Thesis, Kirikkale University, TURKEY (1997)
Posters
* Yavuz, M., Ertekin, A., O'Brien, T., McIntyre, P., Soika, R., Rathnayaka, K.D.D, Naugle, D., Hartwig, T.,Clearfield, A. "Solid Solubility Limit of Bi-Pb-Sr-Ca-Mn-O in Bi-Pb-Sr-Ca-Cu-O Superconductors", Applied Superconductivity Conference' 2000 Pavilion Center, Virginia Beach, VA
Publications
* Yavuz, M., Ertekin, A., O'Brien, T., McIntyre, P., Soika, R., Rathnayaka, K.D.D, Naugle, D., Hartwig, T.,Clearfield, A. "Solid Solubility Limit of Bi-Pb-Sr-Ca-Mn-O in Bi-Pb-Sr-Ca-Cu-O Superconductors", IEEE Transactions on Applied Superconductivity, (2001) vol.11, no.1, pp. 3446-3448.
Photographs
* Ertekin, A. "Take My Photo", Chasing Dreams, The International Library of Photography, 2000
* Ertekin, A. "Offside", Lasting Illusions, The International Library of Photography, 2000
* Ertekin, A. "Best Place For Resting", Journey's End, The International Library of Photography, 2000

View contact information...
«« previous resume next resume »»
Search Results (Resumes 8301 to 8350 of 10816)Go to Search Parameters...
Brief Description
8 Years of Experience in IT Projects in PDVSA (Venezuelan Oil & Gas Company) and Contractors. I have worked in Infrastructure, Server/Client & WEB Projects in all activities involved
8 Years Experience Offshore Drilling/Workover/Completions. Responsibilities included Logistics/Administration/Materials Management/Database Management.
Purchasing Agent / Buyer
Qualified and Certified NCCCO Operator with all endorsements willing to travel
Piping Engineer (Construction) Diploma in Mechanical Engineering Forteen years experience
In-House/Field Landman/DOA/Lease Analyst/ROW Agent/Acquisitions-Divestitures
troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding
PLC, SCADA, DCS, P&IDiagrams,Project Schedulling,Estimation,MS office
Detail and task-oriented Mechanical Engineering professional with an exemplary background in automotive and manufacturing industries. More than 10 years of experience with a track record of propelling technology to optimize performance and profitability. Creative and innovative in conceiving and de
Project Manager/Manufacturing Manager/Site Safety
Senior Project Manager, Quality Manager, International experience
Familiar with Set/Retrieve Down Hole Safety Valves, Static Gradient Survey, Flow control equipment(Baker/Otis SSD), AVA (BPI,BPC,BCP,BIP), Support perforating using MRA with 2 7/8 HSD, and Otis/Baker pulling tools & plugs.
I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.
Completed grade 12 diploma, 2 months experience construction(framing), 2 months experience welding with aluminum, 9 months experience working at local Chevrolet dealership(oil changes, tire repaires, basic maintenence duties)
8 years of experience in telecommunications including 5 as Head project manager and contract maintenance. 1 year of experience in industrial maintenance at Air Liquide as coordinator of maintenance.
Honest, hard working, reliable and self motivated 24 year old who is looking to better themselves through this company if giving the opportunity.
Experience in QA/QC documentation procedures and processes in a petro-chemical plant construction set-up covering various disciplines i.e. civil, structural, mechanical, electrical and instrumentation. Monitor and ensure that all required documentations are followed as per approved project quality
A total of 9 years of experience of which 3 years at Bharat Heavy Plates &Vessels Visakhapatnam a leading Fabrication Workshop in various capabilities of production, welding, inspection of materials, construction, planning, project engineering and informatics
I have 15 yrs experience in Mechanical, Strustrual, piping in projects& running field in Refinery, petrochemical, oil & gas, chemical, ship repair maintenance & new building as a Sr. mecanical engg., mech manager, Sr. piping engg.
Power Electrical Engineer (Power Transformer Designer)
Control and Participate in the operations undertaken in the Telecommunication Centre on an assigned shift and to act as focal point for the gathering & dissemination of information communicated by the Radio, Telephone and Hotline communication channel. To effectively implement the Contingency plan
Manage the Camp Administration,Team work skill,having attitude to manage.Result oriented & communication skills that to share to others
I am looking for an Internship in the sphere of transportation/storage of oil and gas. I’m eager to begin at a position of engineer assistant or any other after I get my Bachelor Degree in Transportation and Storage of Oil and Gas at Ivano-Frankivsk National Technical University of Oil and Gas
Motor mechanic, ITI, Diploma, Six years Experience
Looking for a lucrative job in a challeging environment as a Petroleum Engineer
A professional providing Leadership & Support for his team to achieve organizational goals. My primary expertise as an operations engineer at a world class Ammonia – Urea Complex is further boosted by multi-disciplinary accomplishments in fields of HSE & six sigma
DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES
ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision
Experience on Natural Gas Drilling Rig
Master (Mechanical Engineering), Employer, Bechtel Corporation & Exxon Mobil. Experience in I & C Engineer and Mechanical Engineer
Qualified heavy diesel machanic
More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist
Kahramma and Qatar petroleum Authorised Electrical Engineer with skills of Automation and 1year Experience in EHV U.G cable installation inside live substation and in infrastructure.
Bachelor of Electronics Engineering ,14+ yrs of experience in designing and commissioning complex programmable logic controller (PLC) based control Systems for Process and Machine automation.drawing tools like AUTOCAD, ORCAD.,SCADA Packages like Intellution-Fix32, Ellipse,
Full Technician in Automotive engineering/ Marine
AutoCAD 2002 and Visio Technical 2000
My resume
A qualified and internationally experienced Mechanical Engineering professional graduated from Kirikkale University (Kirikkale/TURKEY) with a Bachelour of Science Degree in Mechanical Engineering in June 1997 followed by a Master of Science Degree in Mechanical Engineering from Texas A&M University
27 years in manufacturing indusrty from panel operator to operations supervisor. Currently employed as a startup and commissioning consultant.
Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.
Auto Cad
Bsc Geology from the university of Ghana I am currently working with Newmont Ghana gold ltd as an Ore control Geologists.I have 2 yrs experience in both MIneral Exploration and Mine gelogy.
Experience in Well completion and Knowledge in IWCF&IADC with speaking 4 languages fluently
I am Electrical Diploma Holder seeking job in elctrical field. i ahve on 8+ years on hand working experince.Presently i am working in oil refinery copmany in pakistan.
Presently working as a field engineer in HLS ASIA( a joint venture firm with halliburton enenrgy services,usa.)
#1 An accomplished Administrator offering a unique combination of national and international business acumen in support of purchasing, material management, contract administration and logistics in the Oil and Gas, Marine, Pipeline and Refining Industries.
Objective: Looking for a position as a mechanical engineer in your great company where my academic background and interpersonal skills may be used and developed.
To seek a challenging position as a Mechanical Engineer, with a progressive organization using my educational background and working experience, leading to growth development and betterment of the organization.
To seek a mutually beneficial relationship in an organization where I will be able to utilize my abilities to the fullest and where my desire to succeed will contribute to the organization’s goals. Interested to work in Electronics and Instrumentation related fields.
Looking for a position in the Administration field with a well reputed organization enhance, broaden and properly utilize my previous experience and potentials over 8 years of experience working with organizations focusing primarily on administration
First   Prev   151   152   153   154   155   156   157   158   159   160   161   162   163   164   165   166   [ 167 ]   168   169   170   171   172   173   174   175   176   177   178   179   180   181   182   183   184   185   186   187   188   189   190   191   192   193   194   195   196   197   198   199   200   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com