Resume - B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated ...

Misco Jobs

Resume #17153

CONTACT INFORMATION:
View contact information...

EDUCATION/QUALIFICATIONS:
Institution: Regional Engineering College
City/Country: Silchar / India

QUALIFICATIONS:
B.E. (First Class, 73.28%) Mechanical Engineering.

DISTINCTION ACHIEVED: National Scholarship
Completed: 1991

EMPLOYMENT HISTORY:
Abu Dhabi Gas Liquefaction Co. Ltd., Abu Dhabi, U.A.E
Start Date: Jan 2001
End Date: Currently Employed
Position/Title: Machinery Specialist
Responsibilities:
* Improve existing online (Bently Nevada) and offline (CSI) condition monitoring systems and implement component condition monitoring.
* Performance monitoring, trending of parameter and vibration of critical equipment and components like rotor, bearings, seals and auxiliaries.
* Preparation and reservation of spares for Major machines (GE, MHI & Elliott turbines, Elliott and Dresser Compressors) overhauling.
* Communicate with materials department / vendor for spares and technical clarification.
* Arrange and keep records of major machinery overhaul and repair.
* Supervision of major machines overhauling contractors.

Achievements:
Improved CSI RBMsuite database and monitoring set up.
Solved chronic vibration problem of Air Compressor and Boiler Feed Pump, which enhanced the reliability of the equipment and plant.
Developed standard major machines shutdown materials reservation procedure and record keeping.
Participated in the casing and rotor upgrade of six case of GE turbine.

Supreme Petrochem Ltd., Nagothane, India
Start Date: Oct 1996
End Date: Dec 2000
Position/Title: Dy. Manager, Condition Monitoring
Responsibilities:
* Condition monitoring & predictive maintenance of critical rotating equipment.
* Preventive maintenance planning.
* To carry out regular inspection and hydro test of static equipment and keep records for statutory purpose. Actively involved in different HSE activities.

Achievements:
Played key role towards implementation of computerized condition monitoring system
Advocated for condition based PM which resulted in reduction of maintenance resources. Number of sudden breakdown was brought down to almost zero in three years
Using advanced vibration analysis (STA and Order tracking) solved problems related to slow speed gearbox.

Birla Vxl Limited, Porbandar, India
Start Date: Oct 1996
End Date: Dec 2000
Position/Title: Mechanical Engineer, NDT & Condition Monitoring
Responsibilities:
* Set up of computerized Condition Monitoring System.
* Condition monitoring of turbine, Gearboxes, pump, compressor etc., of captive power plant and production with vibration, shock pulse and NDT techniques.
* Assist project department at the time of commissioning of equipment.

Achievements:
Played key role towards implementation of computerized condition monitoring system
Developed lubrication program for lime section equipment, which enhanced bearing life from six months to two years.

Special Engineering service Ltd. Calcutta, India
Start Date: Apr 1993
End Date: Apr 1994
Position/Title: Quality Control Cum Production Engineer
Responsibilities:
* Inspection of raw materials, machined parts, spares etc
* To look after production planning of auto spares.
* Vendor development.

Universal Gear Industries and Engineering Works. Calcutta, India
Start Date: Dec 1991
End Date: Mar 1993
Position/Title: Quality Control Cum Production Engineer
Responsibilities:
* To look after day to day machining jobs
* Procurement of materials etc.

SKILL SUMMARY:

Technical skills: Condition Monitoring (Vibration Analysis, Wear debris analysis,
Rotating Equipment Troubleshooting,
Performance monitoring,
RCM and RCA.
Non-Technical Skills: ISO 9000 & ISO 14000 internal audit.
Leadership: Coordinating and motivating others.
HSE: Active participation in HSE activities.
Computer Skills: MS Excel, MS Office, MS Word, SAP
Mastertrend, RBMware, Rotalign, DM2000, PHD, Flexware, AEIMS

TRAINING UNDERGONE:
* Six months fellowship course on "Computer Aided Condition Based Maintenance" of plant and equipment by vibration analysis, wear debris analysis, thermography etc. at IIPM, Kansbahal, Orissa, India.
* Ten days component reliability workshop conducted by Bill Forsthoffer Associates Inc, USA.
* Two days Rotalign Pro laser alignment course conducted by Tern Technologies, U.S.A.
* Three days course on Vibration Analysis-II, at CSI (Emerson Process Management) Dubai.
* Five days seminar and workshop on reliability and failure analysis at Rotate 2004, Dubai.
* Five days RCM course conducted by EIT at Das Island, Abu Dhabi.
* Five days advanced shock pulse monitoring and lube analysis course for bearing condition monitoring, at SPM (I) Ltd. Hyderabad, India.
* Five days seminar and training on Rotating Equipment Health Monitoring by Vibration Analysis at Indian Institute of Science, Bangalore, India.
* Internal auditor course for ISO 9000 and ISO 14000

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4151 to 4200 of 10923)

Go to Search Parameters...

Brief Description

I am proficient in installation, troubleshooting and repair of electrical eqiupment.I can read prints and wiring diagrams. I am skilled in the use of electrical test equipment and electrical tools of the trade. I have WY, and MT master electrical license.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Sixteen years experience in inspection such as Piping and Structure Inspector, Pipeline Inspector, Civil & Track Work Inspector, NDT Technician Operator, Machinery Fitter for petrochemical projects, power plant, oil and gas projects, LRT-PUTRA project

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

chemical engineer

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Tender Preparation & Evaluation, Raising RFP’s, Preparing prequalification document including involvement in preparation of execution strategy, Defining scope of work, preparation of Commercial clarification, Raising commercial deviations etc. Project Monitoring: Continuous monitoring of Projects

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

I am a Slickline Operator with over 20 years of experience in Wireline/Slickline Operations. I am an holder of a diploma in Mechanical Engineering.

20+ years in drilling and completions including under balanced side trac re-entry and frac-pack sand control operations. Have worked off-shore Greece, desert locations Libya, Algeria, Saudi, and Russia

25 years Experience Materials & Logistics, Base Manager, UK, West Africa, Middle East

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

Presently working offshore China coast for the last 11 years. We have drilled & completed over 48 wells. Side tracked over half. We have drilled 8 ERD wells the furtherest is 9238m (with a horizontal displacement of 8063m June 1997) This is China record for "Deepest Measured Depth".

Contracts, Services Manager, Wellhead Maintenace, Integrity Engineer, Senior Well Engineer

I have been a cementing supervisor for Haliburton and Schlumgerger for over 20 years, I have worked mostly offshore, hpht, deep water, I have some land expierence, I am currently working in Yemen, I have a very good knowledge of all facets of cementing, tools, chemicals and equipment etc

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

* Chemical Engineer with 14 years experience in Process, Production, Commissioning, Technical Support & Service, Product Development, Quality Control, Project Management, SHE (Safety, Health & Environment), Logistics, Sales & Marketing and Production Planning area.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

API-510, API-570, API-653, AWS-CWI 25years international experience QA/QC Supervisor ,Superintendent, Coordinator

Crane operator/ outside machinist

My areas of expertise includes commissioning, start up, shutdown and operation of gas plant, refinery and oil production units.

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

Computer knowledge, documentation, teaching, research works and quick learner.

I am a mechanical Engineering graduate having seven years of experience in Petroleum storage terminal.

Ngondi Bessala is a Senior geologist with more than 20 years experience as Exploration Geologist, Operations geologist and wellsite geologist with major companies Elf then Total, Conoco Phillips as consultant, with independants Perenco, Maurel & Prom, Addax Petroleum and CMS energy

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Good organizational & management skills and able to work in team environment and independently.

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

EHS Management Expert with 14+ years of Experience

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

My training as a professional Accountant, coupled with my three years on-hand experience as an ‘Finance / Operations Officer’. (B.Sc Accounting and PE II ICAN)

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

I am 42 years old and Master Degree, currently I am still working for Valeinco as Logistic Manager and I ahave many experiences in Project Management such as Contract Services Manager, Project Manager and Project Coordinator and with my experiences I am confidence to be one of your candidate/staff.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 [ 84 ] 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out