Resume - Graduate in Electrical Engineering, with 14 year experience, of which 6 years in...

Misco Jobs

Resume #1718

CONTACT INFORMATION:
View contact information...

SUMMARY:
Electrical Engineering Graduate (with 14 years Experience)
Oil Sector - Operation, Maintenance & Installation Experience (8 Years)
Utility Sector - Operation & Maintenance (6 years)

EDUCATION:
Bachelor of Technology in Electrical Engineering, Nov 1990.
Calicut University, Kerala, India. Secured - First Class.

EXPERIENCE
1) Electrical Technician in ADMA opco. (Zakum West Super Complex, Offshore).
Dec 2004 to Till. (42/21 Rotation)

Job Responsibilities:
Electrical Maintenance activities in Zakum West Super Complex, including Routine Maintenance, Preventive & Predictive Maintenance, Breakdown & Shutdown Maintenance.
Maintenance in Raiser /Collector Separator /Water Injection/ Power Generation/Gas Gathering /Gas injection Platforms.
Maintenance & Troubleshooting of Generators (6.6 KV (GEC make 16 MW) ), HV/LV Switchgears, Motor Control Centers, HV/LV Motors, MOV's, Transformers, UPS, Battery Chargers, Battery Units, (Lead Acid & Nical Cadmium), Emergency Generators, Plant Lighting etc.
Restoration of Power of power incase of power failure.
Plant Startup / shutdown assistance as per the requirement.
Familiar with Gas Turbine & Auxiliary systems (Starter motors, Hydraulic oil Motors, Lube oil Motors (AC & DC), Seal oil Motors etc.) (Rolls Roys – Avon).
Calibration of Relays (Over Current / Earth Fault /Overload).
Performing work permit requirements.
Performing shutdown jobs and arrangement of temporary power supply.
Familiar with conventional (hardwired relays & contactors) MCCs (Telemecaniqe) as well as new software controlled MCCs ( Like S&I make Motor manager, feeder manager & Holec make Starter Control Unit / Feeder Control Unit.).
Well versed with control & power drawings.
Familiar with Maintenance Management software.
Daily Reporting.
Coordination with Operation / Mechanical / Instruments departments as per requirement.

2)Junior Engineer in Dubai Electricity & Water Authority.
Feb 2000 to Oct 2004.

Job Responsibilities:
Operation & Maintenance of 400/132/33/11/6.6 KV Substations, Ring Main Units and Auxiliary Systems (fire alarm, DC system etc) of Substations.
SCADA, DCS & BMS system Operation.
Attending Emergency (Blackout & Brownout) outages & Normal Scheduled outages & Consumer Complaints.
Commissioning of New Installations (HV & EHV Substations – Switchgears, Feeders & Transformers, and Ring Main Units & Auxiliary Systems).
Coordination with System Control Center (Load Dispatch), Different Departments (Projects/ M.D/ DCD/T&CM), Vendors & Subcontractors.
Familiar Electricity rules and regulations.
Familiar with switchgear types (400 KV – Mitsubishi, Reyroll; 132 KV – Merlin Gerin, Siemens, ABB, Energoinvest, Hitachi, AEG ; 33 KV – GEC, ABB, Reyroll, Energoinvest 11 KV – ABB, Siemens, Tamco, VEM, Toshiba, South Wales ).
Familiar with Ring Main Unit types ( Oil type - Lucy, ABB, L & C, South Wales ; SF6 Gas Type – Tamco, Lucy, ABB, Merlin Gerin, Elmec, Ormazable etc.)

3)Electrical Engineer (with Jacarossi, Italy & Mitsui, Japan & Sunkyong, Korea) in Projects of Kuwait National Petroleum Co.

May 1995 to Feb 1999.

Job Responsibilities:
Site Supervision & Execution of Electrification of the Projects (MORG, MAFP, and AGRP) as per plan & schedule.
Preparation of MTO, Specifications, Purchase Orders, Work Schedules & Progress Reports.
Coordination with client for necessary approvals / permits.
Coordination with Subcontractors & Vendors.
Quality Control (Material & Installation) & Documentation.
Preparation of handover documents.

Project Details:
Installation, Testing & Commissioning of Package Substations (including assembly at site) & Plant Electrification systems such as motors controls, plant lighting, cathodic protection and communication systems.
Cabling works (Power & Control) including laying and termination.
Installation, Inspection, Testing & Commissioning of UPS, Battery Units & Battery Charger Systems (110/48/24 v), DC Distribution Boards.
Modification of Existing Plant systems as per the project requirement (Uprating & New addition of Transformers/Motors/Switchgears/Low Power Systems) (Plant Shutdown Jobs).
Testing and commissioning of all the plant electrification systems.

4) Assistant Engineer in Kerala State Electricity Board.
May 1994 to April 1995.

Operation & Maintenance of 220/132/11 kv Substation & Auxiliary systems.
Maintenance of Switchyards, Power Transformers, DC systems.

5) Electrical Engineer in Vijaya Electricals.
July 1991 to April 1994.

Done Projects related to of Plant Electrification Systems in Cochin Refineries Ltd.
Installation of Fire alarm Systems, Lighting Systems, and Motor Control Centers etc.
Installation of Grounding Systems and Lightning Protection Systems.
Installation of Power & Control Cables.

SKILLS
Manpower & Material optimum utilization.
Planning, scheduling & execution of work as per the normal & emergency conditions.
Knowledge about safety standards & work procedures of Gas pant, Refinery & Utility.
Ability to handle tight schedules.
Good coordination ability with clients/vendors/subcontractors.
Reporting (Daily / Weekly)

PERSONAL
Driving License: UAE, Kuwait & India
Software Proficiency: Ms Windows & Office, MAXIMO
Sea Survival Course: Valid up to Dec 2007.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2551 to 2600 of 9785)

Go to Search Parameters...

Brief Description

I am Associate Engineer in Electrical, Certificate of Competency as Electric Supervisor and Certificate of Competency as 3rd Class Boiler Engineer and 11 years experience in Power generation plant Operation and Maintenanace department with SIEMENS pakistan and Albario Engineering Ltd.

Materials Coordinator +-14 Years, Drilling Logistic, Materials Controller

Pipeline Construction, Horizontal Directional Drilling, surveying, ground surveying, for number of River crossings in India & abroad

Experienced mud engineer

Over 8 yrs. experience in Inspection & QA/QC functions encompassing inspection of equipments for oil\gas and power generation projects, NDE of piping, pipelines and structural welding, qualifying WPS, PQR, WQT, dev. of inspection methodology & QA procedures for oil -gas projects

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

I am an AWS CWI Certified Welding Inspector (#05110391), API 510 Pressure Vessel Certified Inspector (#27442), API 653 Above Ground Storage Tank Certified Inspector (#26681), API 570 Piping Certified Inspector (#27026), API 571 Corrosion and Material Certified Inspector (#30167), API 580 Risk-Based

Structural/piper with pdms & cadworx training

Mechanical Engineer specialized on Design of Pressure Vessels and Heat Transfer equipments for oil, gas and petrochemical Projects.

Reservoir and Production Engineer

yokogawa DCS engineer in maintenance department ,cs3000 and familiar with difrent type of PLC

2 Officer - over 5 years of maritime experience at the LPG/LNG tankers

I DIploma Electrical Engineer. I am also qualified for inspection and approval of Equipments in Hazardous Area Location. I have very good experience in E&I Inspection and Field Engineering - E&I.

QHSE Adviser

Working in BPCL Refinery India as a field operator

Construction ,Production team lead ,Qa Control , Safety Training, Safe Food ,USDA

wireline specialist and downhole gauges engineer

Wellsite supervision -specializing in drilling supervision

Mechanical/Piping descipline engineer with 6 years experience in oil&gas industries.

Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.

Operations Technician for Refinery and LNG/Gas Plant with 15 years of experience with Instrumentation and Electrical background

I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them

Having an Overall inspection experience of 9 years in the Paint Industry and Construction Companies, out of which 8 years in India with Multinational companies and 1 year Overseas experience in handling different projects like Petrochemical, Refineries, Oil & Gas, Chemical Plants, Wind Energy Forms,

For the past 6 Years have experience in Gulf like SAUDI and UAE. Had been worked 5years in "AL NAJIM SAUDI INTERNATIONAL COMPANY "(NASICO) at Dammam, K.S.A.

Plant Operator Chemical

I have 9 yrs Exeperience to work in Polymer Laboratory.I have good analytical skill to analyze Ziegler -Nata catalyst.I have also working and analytical exeperience of PP,LDPE,HDPE polymer product.

Mechanical Supervisor, offshore, FPSO experience.

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Excellent Engineer, with great oil & gas field experience. good management skills and communication. big experience of down stream and upstream.

Facility Engineer for oil and gas

Emergency response advisor and fire training instructor, a multi diciplined fire fighter with 25 years of actual expericnce.

Sheet Metal /Insulation Supervisor

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Instrrumentation design, detailed engineering, procurement, construction, commissioning

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

4years experience as a Rig Electrician, primarily in the onshore drilling - production industry. I have a strong background in power generation of up to 600 VAC in engine generator sets of up to 5 for parallel use: CAT-KATO.

13 years experience. 3 years in oil and gas uk citizen.

HSE Marine

Research land ownership and titles, Interpret land surveys and plats, Effectively build relationships with landowners, Negotiate leases and settlements, Discuss legal issues involved in negotiating land leases, Competent understanding of real property, oil and gas, contract and case law

To summarize my work experiences in the attached file, I have been working for almost 7 years. Most of my experiences are based on the safety and investigative background but nature depends on my official assign task to me. I'm in. Im also a member of PADI im a commercial diver or underwater cons

Skilled in using Hysys, Microsoft Office , VBA, AutoCAD, RSI Indiss, Somcon X;2. Ordinary in using ASP, HTML , C/C++, Visio, VB, CS3000, TDC3000, PKS, petrochemical process operation .

My experience include but not are not limited to ensuring and maintaining healthy, incident and injury-free environment, as well as implementing the company’s safety policies and procedures.

Contracts and procurement, contract administration, expediting, negotiation,

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

First Prev 51 [ 52 ] 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out