Resume - MSc Petroleum Engineer

Misco Jobs

Resume #17344

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE

Nov'04 - Sept'05 Visiting Scholar at Institute of Petroleum engineering, Heriot-Watt University (UK)
* Researching the impact of scale management on intelligent wells (IW).
* Illustrating IWsT application by analysis of Operator supplied case studies.
* Improving Interval control Valve (ICV) operability and flow integrity in cases when it can be affected by scale formation due to Controlling or delaying seawater breakthrough.

Dec' 01 – June' 03 Geolog Engineer, Oil Field Instrumentation (OFI)
* Real time monitoring of different drilling and mud parameters.
* Detection and analysis of gas encountered during drilling in a high-pressurised gas zone.
* Reporting back to the well site geologist and to the oil company in written reports.
* Operating and maintaining a real-time computer-based data acquisition system that records all aspects of rig activity.
* Basic geology by identifying and describing samples, analysis including check of fluorescence and cut, shale factor, shale density and calcimetry.
* Pressure evaluation and prediction of over pressured zones.

EDUCATION

2003-2004 Master of Science (MSc) in Petroleum Engineering, Institute of Petroleum Engineering IPE), Heriot-Watt University
1997-2001 Bachelors of Engineering in Petroleum Engineering, Maharashtra Institute of Technology (MIT) College of Engineering

INDUSTRIAL PROJECT
MSc Petroleum Engineering
"Viscous Dominated Steady-State Upscaling"
Objective: To investigate the feasibility of two-phase upscaling. This project was concerned with verifying different upscaling techniques for small-scale heterogeneities. The aim of the project was to focus on the effects of steady-state upscaling for viscous dominated floods. Different analyses were carried out on a range of 2D- models.

B.Eng. Petroleum Engineering
"GIS-Study of Rockware'99 and its Technical and Economic Feasibility for the Petroleum Industry"
Objective: Visual analysis of all past geological and drilling data of Matsyapuri basin, incorporating the spatial data into one integrated database and preparing appropriate geographic analysis.

GROUP DESIGN PROJECT
MSc Petroleum Engineering
Collaborated within a group of 7 students working on actual data from a North Sea field, similar to that which would be available to an Operator prior to a development decision. Prepared a reservoir model and designed an appropriate production system for the existing field. This exercise helped to give valuable insight into the challenges associated with compensating for incomplete data, and the integration of the various taught components of the course. It was also an opportunity to learn a range of transferable skills such as teamwork, presentation and negotiation.

INDUSTRIAL TRAINING
* Visit to Schlumberger British Training Centre (BTC), Livingston (UK) to become familiarised with logging tools & visit to Core Lab, Aberdeen to learn more about core analysis and to analyse different tests carried out on cores.
* 3-day geological tour to Hutton's unconformity, Pease Bay and Barns Ness.
* 1-month laboratory training and field familiarization training at "Institute of Reservoir Studies (IRS), Ahmedabad Project, Well Stimulation Services (WSS)" O.N.G.C, Ahmedabad, India
* 2-week site training on operations related to logging, stimulation, drilling, casing lowering, cementation, acidization and activation.
* 1-week geological educational tour to Proterozoic "Kaladagi Sedimentary Basin" in North Karnataka State, India.

AWARDS & ACHIEVEMENTS
* Member of Society of Petroleum Engineers (SPE) and one of the director within SPE Emerging Leader's Programme (ELP) Committee-Aberdeen Section for 2005-2006
* Member of Petroleum exploration society of Great Britain (PESGB).
* Member of Society of Petrophysicists & Well Log Analysts (SPWLA).
* Presented a paper entitled "GIS-A Key to Effective Reservoir Management" at MIT-SPE Student Chapter.
* Scholarship from Government of India for 4 years Bachelors' degree course at MIT.
* Scholarship from Heriot-Watt University for MSc Petroleum Engineering at HWU.

COMPUTER LITERACY
Programming Languages: C, UNIX
Operating Systems: Windows
Design Softwares: AutoCAD
Software Packages: Eclipse 100, Wellflo, Pansystem, Petrel, Terrastation, Geopseudo toolkit, MS Office (Word, Excel, Access, PowerPoint, Outlook)

INTERESTS & HOBBIES
* Aquariophily.
* Exploring the Outdoors & Motorbiking
* Exploring astronomy and science related things
* Photography.
* Also like watching & playing cricket, listening to music.

REFERENCES Available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 8301 to 8350 of 9785)

Go to Search Parameters...

Brief Description

6 years working with different equipment NCCER certified level 3

Safety Supervisor , HSE Supervisor for all oil/gas, Pipeline, Offshore Construction, civil Construction

Responsibilities and Experience :

Installation and commissioning, project management

16 years Safety Construction, Developer of Behavior Safety Assurance Formula, Bs Occupational Safety and Health

Comprehensive problem solving ability, excellent verbal and written communication skills, willing to learn and team facilitator

Sr. EHS Manager Professional, 20+ years

Of particular note for you and the members of your team as you consider the placement of a position are my strong accomplishments in my ability to operate a forklift while loading or unloading freight, production and/or shipping experience and completing orders and supplier subcontract parts.

Respected Sir, I have come to know through some of my close sources about the post of a rig worker Under your kind control & I am applying for the same by forwarding my curriculum vitae. I am requesting you to please give me a chance.

i had just completed my B.Tech in electronics and instrumentation engineering from IET bhaddal punjab state india. My six months industrial training was on PLC Programming and working, installation and troubleshooting of field sensors interfaced with PLC's OR PC's.

Experienced Latex and PU Plant Manager

I wish to continue to expand my skills and further myself within the field of diesl fitting

Instrumentation Field Engineer

Civil Engineer with Project Control experience and knowledge of Primavera (P3)

MSc Petroleum Engineer

Certified General Contractor, Concrete finisher, Underground Utillities, Reliable, Creative,dependable

20 years management experience including Construction Management, Project management, estimating and planning

Senior Contract Engineer Trilingual English/French/Spanish Oil and Gas industry, experience in Africa, South America, Europe. Working for a major international engineering company. Mainly contract formulation and admin. but also project and construction management, cost control and planning.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

A broad professional knowledge and experienced in Civil QA/QC and Field Engineering Construction in infrastructure, defence and oil/gas/petrochemical plant construction projects.

Chemical engineer with 3 years of experience in the fields of R&D, pilot plant, process design, basic & detailed engg., project management & procurement in chemical, bulk drug & pharma industries

Contract Administration- Tender Bidding Exercise

water and waste water power plant, steam, laboratory, analysis chemical chemist

Unloading trailers, Recieving, shipping of product, conduct daily activity of 12 employees in a warehouse, some knowledge of mechanical and electrical systems, some knowledge of computer systems, capable forklift operater, class b license.

Emergency Response instructor/ Safety Instructor/ Security consultant

Florida P. E. No. 54962 & Texas P. E. No. 29648; Degree: Bachelor of Science in Civil Engineering - University of Texas, El Paso; Graduate Studies: 12 Hours-Civil / Ocean Engineering - University of Houston; Languages: Fluent in English and Spanish; Beginning French and Arabic

Project maintenance manager/planner/trainer

9 years in Oil & Gas industry gaining extensive experience in warehouse management, logistics, procurement and supply chain management. Progression has been made from a 'shop floor' position to become part of the company materials management.

Mudlogger I`m able to work in any company

B.Tech-Mechanical Engineering, CSWIP-3.2 Senior Welding Inspector and LEAD Auditor-ISO 9000 having a 16 years experince in various levels in EPC projects ion Oil.GAS, Petrochemicals,Refinery and Pipeline in India, UAE,Nigeria, Saudi Arabia and Qatar.

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

4 1\2 years of fiberglassbody design for vehacles(BMW racingcars ADAC) ,plus managment for Airbrush art and Design. 2years as an technicalasistent for industrie wenting and airconditioning. Speek German and write German 100% , too.

I have done my B.Tech from the Indian Institute of Technology Delhi(IIT DELHI) in May 2007, a prestigious institute of India. Detailed information with regard to my studies, experience etc is enunciated in the annexed Biodata,Currently working as a Planning Engineer in Leighton International Limited

I am interested in pursuing a geological career and will be graduating with a Bachelor’s degree in geological sciences from Arizona State University in May 2008. I will be a great asset to your company because I am a fast learner with strong work ethics.

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

Complete Facility Maintenance

Country Manager, Nigeria, The Olive Group. Formerly Chief of Security, River Ranch diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

A professional team member, excellent skills, hoping to bridge Canadian / UAE markets in Oil and Gas - training and development

NEBOSH level 6, NEBOSH Level-3, IOSH Managing Safely, Diploma in Fire Engineering, Diploma in Industrial Sfety

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

Management/Business Development of Engineering/Consulting Services

Experienced Petroleum Production Database Admistrator and Petroleum Geoscience Professional

document controller / information manager / fluent English and Erench/ experience oil project FPSO / vendor engineering hyundai documentation/ final documentation/ client link on final documentation/ vendor support for final documentation

Metallurgical Engineer

Maintenance of all rotating machines of ammonia, Urea, Utilities, bagging plants including pumps, turbine, compressors, gear boxes, gas turbine etc, and detail is as:

I have 30 safe Years as a Manager, Engineer type,Supervision, Safety, and a Heavy Crane Operator that excels working on Lift Studies, Safety, Meetings, Man Power, Crane Assembly/Dissemble/Boom Changes, and written Lift Procedures.

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Engineer Project / Instrument

Civil/Structural Field Engineer. Construction Management with large EPCM projects

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 [ 167 ] 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out