Resume - I have 19 years of oilfield experience most recently on 30000ft wells in areas o...

Misco Jobs

Resume #1738

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

To obtain a position as driller for a progressive company which will fully
utilize my knowledge in the oil field.

SUMMARY:

I have 19 years of oil field experience working on numerous types of rigs under various conditions. My most recent five years have been on 30,000 foot
Rigs. I am familiar with G/D3000 and Ideco 3000 systems, Omie C-3 and slingshot derricks rated from 1.5 to 1.6 million pounds and Canrig and Varco top drive systems. I am also experienced with oil base muds, high pressure and high amounts of H2S.

CERTIFICATIONS:

IWCF Sub Surface/Surface
IWCF Surface Only
Comprehensive Survival Craft/Survival Suit Training
Helicopter Egress Training
Offshore Fire Fighting

EXPERIENCE:

1998-PRESENT DRILLER/ASSISTANT DRILLER, Parker Drilling Company,
Houston TX
Started in Africa as an assistant driller on a fly rig then transferred to Kazakhstan due to
lack of work. In 2000 I was transferred to Sakhalin, Russia and promoted to driller.
There I drilled on the “Malipac” an offshore rig in 100 meters of water. In 2001
I was transferred to the Tengiz field in Kazakhstan where I drilled until a recent
management change and reorganization bumped me back to assistant driller.
Responsibilities include: Recording data and reporting to supervisors, rig operations
supervising crew.

1983-1998 DRILLER, James Bigard Drilling company, Mt. Pleasant MI
Began as a floor hand and worked my way up ton driller working on triples,
doubles and singles the largest of which were 1200 D/E, drilling to depths of 13,000
feet.

REFERENCES:

Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4951 to 5000 of 10816)

Go to Search Parameters...

Brief Description

Senior Piping Designer PDS

Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.

Internationally experienced purchasing manager with experience managing an office that supports multiple sites. Experience with exporting goods to most countries in South America. Excellent people skills.

A Quality Assurance Professional Professional with Over 25 years of experience in Health, Safety & Environmental, Quality assurance, Quality control system development, implementation and maintenance of project HSE & QA/QC Standards. Preparation of Project HSE and QA Plan & procedures, Job Safety Al

Maintenance and operation of 33/11kv injection sub-station,Operation of high voltage switch gears,Restoration of faulty network.

CAESAR II , Autocad

I have completed Diploma in Mechatronics from NTTF coimbatore (India) . I have total 3.5 years of experinec in the field of Industrial Automation,( PLC,Robotics,SCADA,Hydraulics,Control sys,Instrumentation).Presently working with Siemens Infrastructure logistics in Dubai (UAE) as Team Leader .

Landman and Title Experience

About 2 years experience with PETROFAC in handling EPC Feed and detailed Engineering Design for the Oil and Gas Industrial projects.

Process Engineer with 3 year exp[erience

Piping design engineer

ndt

I have a diversed Edcational Background in Civil Engineering, Industrial Technolgy, And Avionics Electronics, And Air Force Leadership School.

I have obtained B.Eng. in Mechanical Engineering (2nd Class Upper) and HND in Mechanical Engineering (Upper Credit) , I also have three years working experience in Production Company

Drilling fluid engineer

MECHANICAL GRADUATE SEEKING FOR A JOB ,

AWS CWI /Welding Inspector /Piping Inspector/ QC,Welding Engineer

Seeking position in chemical operational field where I could apply all major principles and my specialized interested areas of material application by which I can apply my wide knowledge and professional expertise in the field of Chemistry.

Exp. in Fire & Gas System and field Instrument in more then 6 year's

I am a Petroleum Engineer and i can use a good number of software programming languages like Visual basic, Material balance software and I finished in University of PortHarcourt with Second class upper, Bachelor of Engineering.

I am very skilled in using PDMS software and I have been modelling for Electrical, Instrument and Telecom for 3 years now. I have work experience in Philippines and in Norway. I have a small experience also in Pipe design and Cable tray supports.

ON site project experience,Knowledge of AutoCAD and CADWorx

Mechanical Maintenance Engineer/contract and Procurement Engineer

Professional Project Manager, PMP certification, More than 15 years of domestic and international oil & gas industry experience

I have been working in design and construction of instrumentation and control systems for pipelines and industrial plants (oil & gas), for more than ten years. My experience includes specification, design, configuration, and programming of complex control systems with DCS, PLC, and SCADA systems.

Chemical eng degree and an overall work experience of almost 10 years in worldwide operations (Congo, Gabon, Nigeria, Libya and Peru at present) for more details please see my resume). I speak italian, english, spanish and french.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

M.Tech(Applied Geology) from IIT Roorkee,Computer Geeoscientist with 18 month exposure on Geographix Software(Oil and Gas interpretation software), Geologist, GEOGRAPHIX System administration,

Five years of work experience on board of AHTS’s, OSV’s, ROV/Survey, Pipe Lay Barge, Container, Con-Ro and other vessels as 2nd Mate, Chief mate, DPO and Relief Captain.

Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.

Senior Geophysicist with 8 years experience in E&P company, solid background in structural and petroleum geology. Experienced in prospect generation and evaluation, total command over Windows Office suite (Word, Excel, Power point), fluent in English written and oral..

HSE Officer with experience in Oil and Gas and Construction Industry. Skills - Design and Implementation of HSE Management System for Oil and Gas Industry and Implementation of ISO 14001, OHSAS18001 & ISO 9001 for Construction Industry

Petroluem Engineering

I am a Field Service Engineer with over 12 years of extensive Offshore/Onshore field experience in various aspects of drilling, completion, wellhead installation, maintenance and well servicing operations

Instrumentation Engineer with 5+ yrs experience in Automation industry and Power Plant Industry.

Electrical Engineer ( project & design) with 15 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

Oil & Gas Process Technology / Senior Process Engineer

Documentum 5.3, DDMS (Digital Document Management System), Electronic Filing System, Library Automation, Develop Library Web Page through Frantpage, Develop Information Portal In-house

Versatile professional with more than 10 years responsible experience in OilField operation management. Good background petroleum geology, wellsite geology, geophysical and seismic interpretation, stratigraphy, petroleum engineering principles, prospect evaluation and report writing.

My main areas of expertise are negotiations, sales and account management. I have worked for many years as an entrepreneur being responsible for all operations in the Benelux region. So, business development experience is an essential part of my assets.

Operational Risk Manager

I am Geologist with Master degree at Texas Tech University and I am working in Reservoir Engineer and Petrophysics. I have 10 experience at oil industry

I have 19 years of oilfield experience most recently on 30000ft wells in areas of high pressure and high H2S. My familiarity with many rig types and conditions and ability to work without direct supervision makes me an asset to any progressive drilling company.

i graduated from university in July 2001 after successfully completing bachelors and masters degrees in mechatronics engineering, i am extremely interested in a career in the offshore industry especially in the area off drilling and MWD/LWD

job for radio operator, orany entry leveljob such as asst purser, storeman,galley hand, steward

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

A competitive technical position in the Engineering field, where my skills can be further applied and developed.

Piping/Civil/Structural design and drafting. AutoCad 2002 certified.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 [ 100 ] Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out