Resume - I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, ...

Misco Jobs

Resume #1753

CONTACT INFORMATION:
View contact information...

OBJECTIVE: An interesting position with a growing company

EXPERIENCE: Wolverine Drilling Co Kendmare, ND,USA
Floorhand, Motorman 10-01-01 to 11-02-02

Cleere Drilling Co Pleasanton, TX, USA
Floorhand, Motorman 01-01-00 to 09-24-01

South Texas Drilling Co San Antonio, TX, USA
Floorhand, Motorman, Derrek, asst driller 01-01-95 to 11-25-00

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 7851 to 7900 of 10849)

Go to Search Parameters...

Brief Description

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

qualification: B.E (Chemical Engg.) Industrial Training: Cipla ltd. (one month)

Electrical Fitter with experience as a Condition Monitoring Technician/Project Manager since 1994. Highest skill level in Predictive Diagnosis. (Vibration Analysis, Oil Analysis, Wear Debris Analysis, Thermography, Ultrasonic Detection, High Voltage and Low Voltage motor testing).

Formation damage, workover candidate selection, hydraulic fracturing, production optimization, R&D for drilling, completion and production enhancement based on nano-technology, coiled tubing, matrix acidizing, acid fracture, cementing, multiphase flow simulation and programming.

I am a Bachelor degree holder in Computer Information Systems from Ajman University of Science and Technology in Abu Dhabi / UAE 2002 with excellent Analysis, Developing and English communication skills. I feel that I could be very useful to fulfil the work you are doing within your departments.

Present Assignment: Specialist – MTBE Operations Department MTBE Malaysia Sdn. Bhd.(From April 2001 – Till date) (a wholly owned subsidiary of Petronas Malaysia)

Totco Institute of Secretariat Studies .Diploma in Computer Science. Ladoke Akintola University of Technology, Ogbomoso.B Tech in Chemical Engineering Oil and GAs recording Using Oracle Database Programme. Calculation of deferment in Oil and Gas Computation Well Test monitoring and surveillance.

I have worked on oil and gas rigs for 8yrs. I have worked floorhand, motorman, Derreks, asst driller. I know how to work on motors and diesel motors. I know how to weld.

Fully qualified diesel mechanic 10 years exp.(4 years in Oil & Gas) Experience of high horsepower diesel engines, fluid pumps and associated equipment incl. hydraulics/pneumatics & electrical/electronic systems.

Objectives: As a mechanical engineer I am: - seeking an engineer position in oil & gas Industry - willing to get field experience and use gained knowledge in practice - able to study new equipment and technologies - looking for a new career opportunities

Objective: A challenging and rewarding position in a fast-paced, entrepreneurial corporate environment where my leadership and people skills will be utilized to my maximum potential.

Drilling Fluids Research.

Oil and gas exploration consultant with twenty years worldwide experience seeks project, contract, or position

To obtain an entry-level chemical engineering position in the Oil industries sector. Willing to learn and train in harsh condition. Will relocate to anywhere in the world.

C.V Diving supervisor---diving projects rep.

Public Accounting graduated at "Catolica del Tachira" University in Venezuela, Tachira state, bilingual Spanish-English.

I have work in SICPA Inks Pakistan pvt ltd as trainee production officer. Presently I work in Riaz Engineering works as a design engineer.

Objective To have the opportunity to contribute to the efficiency and productivity of a prospective employer.

Research, development, or technical support in organic analytical chemistry, particularly in the area of quality control or quality assurance [in petroleum or petrochemical products]

I have more than 7 years experience as a UNIX Administrator/Engineer. I have a 'make it work' attitude, and the experience to do it.

CV showing details of precious work experience and personal skills

OBJECTIVE Seeking entry level position in the off shore oil and gas industry. Jump start a new career with your company while becoming a mechanical engineer through on the job experience, schooling and hard work.

SUMMARY OF QUALIFICATIONS Excellent writing ability. Independent research skills. Proactive. Motivated. Goal-Oriented.

Objective: To develop the knowledge acquired and apply them in the oil industry, as a Petroleum Engineer.

B Sc. Chemical engineering • Over 3 years experience including in process development

I'm petroleum and Gas Engineer in specilty Development and Exploitation of Oil & Gas fields,taking my degree from Kuban State Technical University Krasnodar Russian Federation in 1999.From this university done 1 year advance course in the same specialty

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

Knowledge Of Autocad, Pro-engineer, Catia, Unigraphics, Ideas

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

More than one and a half year of hands-on experience in Instrumentation and Project and Sales.

Control & Instrumentation Engineer with 5 year Exp in Detailed Engineering

I'm a geophysicist.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Over 30 years of permanent and contract positions in design, operation, construction and pre-commissioning of Marine, Oil & Gas, Chemical and Offshore projects in the U.K., Canada, USA and the Middle East

Senior piping designer

Turbine tech.

Instrument Engineer with more than 27 years of experience in execution of erection, testing & commissioning/ proposals in the field of Instrumentation Projects for Oil & Gas, Refinery, Petrochemical, Fertilizers and other Chemical & Process Industries.

It is my intention to secure a career in the field of Health and Safety on an oil/gas platform. However, since I am new to the industry, I will consider any position.

B. Eng. Petroleum & Gas Engineering University of Port Harcourt, Rivers State, Nigeria.

I can work floors, motors, and derricks.

I have a very strong back and am not affraid of hard work. I am very punctal

Geology, To be graduated.

BS Chemical Engr. with 15 years onshore/offshore oil/gas production engineering support, facilities planning and design, capital project development and economic evaluation, operations, process simulation/optimization, commissioning, construction and maintenance. Also trained young Saudi engineers

chemist, AUC english course, computer course, 2008 graduation

I have 31 years of Technical, Hydraulic Specialist, Fitter experience in S.A Air Force and on Majour Ind Steel Process Plants. Would like to become ROV operator.

BS Engineering, with 11 years experience in Shell Gas LPG (pak) as Health & Safety Officer/Operations Engineer, came to Canada in 2005, initially in Toronto but relocated in Calgary due to enhancement of my career in Oil & Gas field. In Toronto worked in ITN Food Corporation till June 2006.

Skill: I have worked as Production Shift Supervisor in Gas processing plant from 01-07-2000 to 31-03-2006. Successfully completed Basic Offshore Safety Induction & Emergency Training (OPITO Approved) conducted by MSTS ASIA in Malaysia, Nutec Group. Qualification: B.Sc. Engineer (Chemical), BUET.

More than 2.5 + years of experiences in the field of Planning as a Planning Engg(BE Mechanical Engg.). Analysis of Resource requirement, Performance analysis, Progress measurement, Monitoring & Reporting of EPC deliverables and activities of Pipeline projects

Mechanical Engr: Fabrication works as Mech w/Shop manager ,drawing study,planning,procurement,supervision QA/QC ,erection.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

First Prev 151 152 153 154 155 156 157 [ 158 ] 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out