Resume - Special Skills in DCS Operations

Misco Jobs

Resume #18163

CONTACT INFORMATION:
View contact information...

To: The Resources Manager And Consultants,

Respected Sir,

Sub: Application for the post of DCS-OPERATOR.

I have passed BSc. First Class from S.V. University, Tirupati on April 1995, from INDIA.

Now I have 9 YEARS experience in refinery operations. Present I am working in KUWAIT NATIONAL PETROLEUM COMPANY -KUWAIT as secondment FIELD OPERATOR.
I am having experience in DCS OPERATIONS in control Room (YOKO GAWA CENTUM & TATA HONEY WELL TDC 3000).
Earlier I was working in MANGALORE REFINERY-INDIA as PROCESS OPERATOR (With pre-commissioning and commissioning experience of SRU) & Hydrogen Plant (Catalytic Steam Naphtha Reforming)

I am very eager to join your industry for my further future improvement. I give assurance to you working promptly and sincerely.

Here with I enclosed my BIO-DATA for your perusal and consideration.

CURRICULAM VITA

EDUCATIONAL QUALIFICATION:
B.Sc., (CHEMISTRY) University Degree
University: SV University, Tirupati- Andhra Pradesh- India
Year Of Passing: 1995

TOTAL EXPERIENCE: 09 YEARS

Current: 10.0 Lacks/Pa
1) Special Experience Mainly Worked In The Erection, Pre Commissioning And Commissioning Of Mangalore Refinery.

2) Worked In The Change Over Of The Process Controls From Pneumatic To Dcs Panel In Shuaiba@ Refinery-Kuwait

EXPERIENCE & SPECIAL SKILLS
Experience (Options): Present Employer Kuwait National Petroleum Company
(KNPC) SHUAIBA REFINERY.
Designation: Field Operator. Date of Joining: 31.03.2001
Work Experience: 1. ACID GAS REMOVAL UNIT
Licenser: Ben field Corporation
Capacity: 45MMCFD
Feed: West field gas – Kuwait + Refinery Overhead LPG.
Equipments: Feed Surge Drum, Absorber, Flash Column
Regenerator, Feed Booster Compressor(LPG)

2. SULPHER RECOVERY UNIT
Licenser: Kinetic Technologies International
Capacity: 600 T/D
Feed: Acid Gas from ATU & Acid Gas Removal Unit
Equipments: Thermal Reactor, Air-Blower, Sulphur Condenser,
Claus Reactors, Thermal Incinerator, Sulphur Storage, Sulphur
Degasifying Section.

3.BURGAN GAS COMPRESSION GAS UNIT
Capacity: 40MMSCFD
Feed: Natural gas from BURGAN FIELD-KUWAIT
Equipments: Two stage centrifugal turbine compressor

4. LEAN GAS COMPRESSION UNIT.
Capacity: 20MMSCFD
Feed: Lean Natural gas from Burgan field
Equipments: single stage centrifugal turbine compressor

5.NAPTHA FRACTIONATION UNIT
Capacity: 38,700 BPSD Liquid feed.
20.40 MMSCFD Vapour feed.
Feed: Naphtha vapour & LPF gas
Equipments: Debutanizer
Fractionators
Naphtha heater(Gas fire)
Products: LPG
Kerosene
Naphtha

6.AMINE TREATMENT UNIT
Capacity: 3000 GPM
Feed: Rich MEA
HP& LP gases from the OILFIELDS -REFINERY
Equipments: 2 Regenerators/ 2 HP gas amine contactors
LP gas amine contactor
4 Amine reboilers,

7.MEROX KERO UNIT
Capacity: 20,000 BPSD
Feed: Kero from naphtha fractionation unit
Product: ATK (Aviation turbine kerosene)
Equipments: soda pre wash/Merox Reactors
Kero settler/ kero water wash
Salt filter/ Clay filter.

Previous Employer: MANGALORE REFINERY & PETROCHEMICALS LTD.
INDIA, MANGALORE.

Work Experience Duration: 26.06.1999 to 30.03.2001

1. 1.SULPHER RECOVERY UNIT
Licenser: KTI & UOP
Capacity: 105 T/D
Feed: Amine Acid Gas from ATU
Equipments: Thermal Reactor, Sulphur Condenser, Air-Blower, Claus & BSR & Select ox Reactors, Thermal Incinerator
2. AMINE TREATMENT UNIT
Feed: Riche Amine from Refinery
Equipments: Flash Column, Regenerator, L.P.G. Absorber, Filters, Reboilers.
Licenser: Engineers India Ltd.
Capacity: 460M3 / HR

3. SOUR WATER STRIPPING UNIT
Licenser: Engineers India Ltd.
Equipments: Strippers & Reboilers

Previous Company
ASIAN PEROXIDES LTD INDIA

WORK EXPERIENCE-: HYDROGEN GAS PROCESSING UNIT
(Steam Naphtha Catalytic Reforming Unit)
Duration: 20.04.1995 to 26.06.1999.
(Technical) Operating, DCS (Yeko gawa Blue Star)
Supervisory / Management: Field Operator

Special Skills & Strengths: Having experience in pre-commissioning and commissioning in Sulphur Recovery Unit from Mangalore Refinery and Petrochemical Ltd.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5001 to 5050 of 9785)

Go to Search Parameters...

Brief Description

AutoCAD, ProE, CATIA , Primavera ,DataStream 7i, MP2

Excellent English, excelent communication skill, great team player, great Marketing education background, fast learner, and highly motivated.

Preparing well program and well planning. Rig site night drilling supervisor.

experience and certified rigger and craneoperator has an experience in civil, mechanical, oil and gas industries

Production & Process Operation of whole plant with the help of DCS (Experion PKS R100) & supervise all other offshore activities, co-ordination of Slick line job, BHP survey & Work over in the wells, all types of maintenance jobs, Supply Vessels, Chopper Activity, Fire Fighting Team Leader & all hot

Certified International Project manager (By the AAPM)

HIGHLIGHTS: Geology, Oil sands, Heavy oil and bitumen recovery, Drilling, Well logging, Advanced Petroleum Technology; Methodical, efficient thought procces, positive and professional attitude, job task planning and organizing

I am a Diploma Mechanical Engineer having experience around 5 years as production operator.

My job objective is be involved in a challenging and creative position where I can apply my education in innovation and Further development of existing technology - as a petroleum engineer

Mechanical engineer having experience in piping design

Project engineering and management, business development, soviet design standards, Russian speaking, oil & gas, minerals and metals

Operate fractionation plant, lean oil extraction plant, refigeration plant, instumentation work, maintenance work.

BSc Geological Engineering

Safety Engineer / Rigging & Lifting Eng

Projecr /Construction manager

Seeking a job position in the field of Instrumentation, with challenging opportunities to further enhance and optimize leadership and technical capabilities and to contribute to the success of my employer in my fullest interest and potential

Chemical Engineer with 7 years of experience in Chloralkali Plant and Caustic Concentration Flaking/Prilling Unit

I am currently a final year M.Sc. Student in Electrical Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM). My graduation is expected by May 2003 and I will be available by July 2003.

1.2 years of Experience as a Piping Engineer, 2 Year of Experience in PDS Modeling

I am a Controls and Instrumentation engineer from Pakistan. I have 3 year experience

Electrical Engineer

Application for the Post of Piping Designer .

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

LSIT, total 12 years of surveying

PIPING DESIGN STRESS ANALYSIS ENGINEER

Reservoir Engineer

I graduated from Bandung Institute of Technology (ITB) majoring Chemical Engineering on March 2004 with GPA 2,92. I have experiences as a chemical tanker chartering team and process engineer.

A senior manager with over 25 years experience in engineering management including sales and project engineering in the Middle East, North Africa & UK within the oil, gas, construction, power, petrochemical sectors with blue chip companies including Saudi Aramco, Shell UK and British Gas.

Thirteen years experience of Project Execution, Quality Assurance & Quality Control at OIL & GAS Industries at Saudi Aramco, QatarPetroleum,Parco Refineries, National Oil Refineries, PSO Plants, in Saudi Arabia ,Qatar & Pakistan involved with the FAT’s, Installation ,Testing and Commissioning of

Senior QA/QC Engineer (Welding, Inspection & NDT) / Construction Superintendent, with more than 12 years of experience in the field of Oil and Gas performed with multinational engineering companies

stat engineer (oil and gas exploration) , drilling rig move fishing

MSc GEOLOGY, RESEARCH WORK IN ELECTRICAL RESISTIVITY METHOD IN GEOPHYSICS FIELD

B.E.(Chemical), 6 years of experience in offhsore oil and gas platform of which 3 years in control room.

Over 9 years experience in Instrumentation & control in Chemical, Power, Cement, Sugar & Petrochemical industry

I have worked in Pre-Commissioning, Commissioning, Normal running Plants. In India and Abroad, both places I have worked. I have worked in Chemical, Fertilizer and oil and gas industry

QA/QC Inspection, Fabrication, Installation, Facilities Upgrade etc.

Special Skills in DCS Operations

SAP SD functional cons. resume total 6 yrs exp 3yrs in SAP SD+ IS OIL functional consultant

Medical support to clients operating in remote or hazardous and offshore environments worldwide. Maintaining adequate medical facilities. Providing services such as First aid training, Health and safety checks and enforcing the companies HSE plan, and ensuring a safe working environment.

Mechanical, Automotive, Project, Calibration, Engineering, Production

Instrument technician

I am working as safety officer at Aramco Saudi Arabia for more than 6 years. I am interested to work in your country. Please arrange my telephonic interview and if you need further documents please inform me on my email.

Operation and Maintenance of Utilities, Project Management, Energy Management, Six Sigma and IT applications

In Indian Naval Hydrographic Department, I have worked in various organizations of Naval Hydrographic Department at various capacities including survey assignments onboard ships, National Hydrographic Office as Quality Controller/Quality Assurance member and National Hydrographic School as Hydrograp

15 year career of Document Management and Control. Assisted in the development and implementation of EDMS. Held over sea positions in various European locations, Middle East and Asia. Conversant with International standards, guidelines and regulations.

A Nigerian. Qualified and experienced geoscientist with 5+years cross-functional experience.

Drilling Engineer / TourPusher

Petroleum Engineering

interpretation of isometric drawing. preparation of materials, equipment and tools for the installation. cutting and grinding as per cutting plan, lay-out f pipes and plates as per drawing, fabracation and installation of pipe spools, pipe supports and other structural supports.

Working as a piping engg. in Satnam Engg. & Fab. Pvt. Ltd. I take training for piping design and also done PDS training.i had completed my B.Tech Mechanical engineering in 2007 from U.P.T.U. Lucknow. I have one year experience in construction field and searching a job i

First Prev [ 101 ] 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out