Resume - Drilling professional for 20+ years; extensive international well construction s...

Misco Jobs

Resume #18240

CONTACT INFORMATION:
View contact information...

Experienced drilling engineer / manager with a record of success in the design and construction of complex wells.

Managed the construction of China's first horizontal, underbalanced, multilateral coal bed methane well. Successfully completed on time, within budget and with no LTA's.

An analytical and independent creative thinker with a record of providing innovative solutions from concept to completion.

Multi-skilled with technical, commercial and leadership experience in a diverse range of international locations.

CAREER DETAILS:
2004-Date: DRILLING PROJECT MANAGER: Asian American Coal Inc., China
* Design of horizontal multilateral underbalanced geosteered coal bed methane well:
-Evaluation of well functional requirements
-Analysis of offset vertical well data
-Identification of risks, hazards and preparation of contingencies
-Preparation of well plans, detailed procedures and time estimates
-Evaluation of hydraulics, torque/drag, casing requirements
-Specification and procurement of drilling and completion equipment
-Preparation of AFE
-Evaluation of proposals, negotiations with service providers, preparation of contracts

* On-site well construction supervision and management of multi-disciplinary team:
-Drilling
-Underbalance
-Geology
-Completion
-Production
-Contracts / Budget
-Materials / Logistics
-Local Liaison / Regulations
-Data Management and reporting

Responsible for team organisation, reporting structure, definition of roles and responsibilities, allocation of tasks.
Constant evaluation and analysis of drilling operations in order to achieve continuous improvement.
Supervision and monitoring of the performance of employees and contractors (drilling contractor, horizontal directional drillers, geosteering, special tools for shallow extended reach drilling).

* Special responsibility for on-site HSE management:
-HSE Pre-spud rig inspection; supervision of required remedial action
-Emergency response planning
-Introduction and coordination of Job Safety Analysis system
-Introduction and coordination of Hazard Observation System
-Preparation of Safety Awareness Posters
-Safety Meetings
-Specification of special safety regulations for underbalanced drilling
-Preparation of HSE daily report

*Post-well technical and commercial management:
-Supervision and preparation of operations reports
-Technical operations review; capture lessons learned
-Service Contractors payment negotiations

1998-2004: REGIONAL MULTILATERAL DRILLING MANAGER: Halliburton, Asia Pacific
* Technical and commercial management of multilateral well construction services
* Complex well planning
* Risk assessment and contingency planning
* Timing estimates
* Ordering, mobilisation, assembly and testing of equipment
* Member of multidisciplinary well construction teams
* Operations supervision; HSE compliance
* Performance appraisals, goal setting for personnel
* Development of business plans & strategies
* Analysis of market, identification of new markets & opportunities
* Presentations to customers and colleagues
* Preparation of proposals, tenders
* Monitoring of service quality including KPI reporting and analysis
* Supervision of business development personnel
* Selection and organisation of personnel for MLT training
* Implemented innovative solutions for projects in Malaysia, China, Indonesia

1997-1998: MULTILATERAL DRILLING MANAGER: Sperry-Sun, Canada & Global
* Managed and mentored a team of 3 MLT engineers
* Co-ordinated project in Colombia
* Preparation, presentation of training schools, equipment demonstrations
* Analysis of operational problems, implementation of remedies

1996-1997: MULTILATERAL DRILLING ENGINEER: Sperry-Sun, Canada & Global
* Responsible for planning and deployment of MLT globally including Norway, UK, Canada, Venezuela
* Support for projects in the Middle East
* Design and testing of new ML technology
* Drilled well to test new short radius and CT equipment
* Drilled well to test new ML technologies
* Disseminate best practices; write procedures and technical manuals

1993-1996: DRILLING ENGINEER: Sperry-Sun, Europe
* Drilling engineering support for directional operations: BHA analysis, recommendations; hydraulics analysis; directional planning; failure analysis of downhole tools
* MLT Co-ordinator on Europe's first multilateral well
* Temporary Directional Drilling Co-ordinator for NAM offshore team

1991-1993: ADT UNIT MANAGER, Sperry-Sun, Norway
1990-1991: SENIOR ADT, Sperry-Sun, Nigeria
1987-1990: SENIOR ADT, Sperry-Sun, North Sea
1985-1987: APPLIED DRILLING TECHNOLOGY ENGINEER, Sperry-Sun, North Sea
1984-1985: SDL ENGINEER, Sperry-Sun, North Sea
1981-1982: SURFACE DATA LOGGING (SDL) ENGINEER, Nigeria
* Monitoring and analysis of drilling operation to ensure efficiency and safety
* Constant monitoring, analysis and detection of pore pressures and fracture pressures
* Kick prevention /detection and well kill procedures
* Surface data logging and analysis
* Recommendations for optimising drilling performance
* High pressure, high temperature experience
* Shallow gas, sour gas experience
* Semi-submersible, jack-up and land rigs: North Sea, West Africa, Arabian Gulf

QUALIFICATIONS & EDUCATIONAL COURSES:

* B.Eng in Mechanical Engineering – University of Liverpool, UK
* 4 'A' levels & 9 'O' level qualifications

Training Courses:
* Business Acquisition Training (Malaysia, 2002)
* Effective Negotiating (Malaysia 2001)
* Presentation and Communication Workshop (Canada 1998)
* Well Completions, Intermediate Level (Canada, 1997)
* Directional Drilling update (Canada, 1997)
* AutoCAD LT (Canada, 1997)
* Multilateral Technology (Canada, 1996)
* Drilling Engineering (Houston, 1993)
* Drilling Fluids Technology (Houston, 1993)
* Mud Motor Mechanic (Aberdeen, 1993)
* Directional Drilling (Aberdeen, 1989)
* Applied Drilling Technology (London, 1985)
* Directional Surveying (Great Yarmouth, 1985)

ADDITIONAL INFORMATION:

* Born 3rd August 1960, Married, British
* Language skills include basic French, German, and Dutch
* Member of The Society of Petroleum Engineers since 1995
* Author of 10 published papers/articles
* Proficient in Windows and MS Office software.
* Proficient in directional well planning and drilling engineering programs, including directional BHA analysis, torque and drag analysis, hydraulics.
* Fully familiar with on and offshore drilling operations and equipment

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 9351 to 9400 of 10816)

Go to Search Parameters...

Brief Description

Over 20 Years experience in International and Domestic assignments in the Electrical and Instrumentation Fields. Assignments internation-ally have been in Project/Construction management, Supervision, QA/QC and commissioning. Project experience is diverse and in-cludes mining and extraction/ recov

In-service / shutdown inspection of most of the static equipments in a plant, such as pipe works, pressure vessels, hydrogen crackers, reactor vessels, storage tanks, reformer tubes, risers, topside structures, well head parts, valves, etc. , Inspection of all plant construction related activities

12 Years Maritime Experience • Crew Training and Management implementing. Marine Safety, Salvage, Port and Offshore Operations • Policy and Procedure Enforcement/Compliance

A qualified professional with 6 plus years of expertise, with sound technical and commercial practices with consulting experience in Change and Project Management in the areas of EHS management, Sustainability and Corporate Governance with due imp. to CSR, HR and Social Environment.

Engineering graduate experienced in installation ,pre-commisiioning ,commissioning

Geologist

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

Adaptable to various working conditions including a multi-national workforce and a minimal supervision. I enjoy learning new skills and want to improve my drilling skills in international posting. I’ll be a good asset for my employer as I am a proven team player available to work world-wide.

Application for Heavy Equipment operator and mechanics.

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

A dynamic professional with over 18 years of rich experience in Procurement, Vendor Development and Inventory Control.

I'm a recent graduate in Metallurgical Engineering and have an extensive Internship experience in the Oil and Gas Industry.

Drilling Crew

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Controls I&C Engineer

Electronics/Instrumentation Technician Specialist

Quantity surveyor, estimation and land surveying works

Consultant, Project Management, Mechanical, Marine Engineering, HSE and Quality.

Project Controls Cost Engineer / Analyst (EVMS, Change Management, Cost Forecasting Planning and Budgeting)

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

Senior level managerial assignments in Project Finance/ Company Secretary/Finance & Accounts / Auditing & Taxation / MIS with an organisation of repute. ƒ¶ Hands-on manager with expertise in accounting systems development & financial reporting.

29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.

Have vast experience in sales,construction,contract bus service provider company,timber industry and presently with working with real estate and builder

Highlight: Thirty-Six Years Continued Experience in the petro-chemical, power generation, mining and commercial industrial sectors, working with several major companies at various levels of responsibility in the procurement/supply/distribution/and management of materials.

Geologist with good expertise in planning, follow-up and reporting of geotechnical and geophysical site-/soil-investigations.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

I want to start working on a Oil Rig as a Roustabout and work my way up. I am willing to make a long term commitment and pursue this career for as long as possible. I want gain enough experience to become a Driller.

Work History: July 2002 to December 2002 PDVSA INTEVEP Trainee August 2001 to October 2001 PDVSA INTEVEP Trainee Education: UNIVERSITY ESTUDIES Petroleum Engineer: Central University of Venezuela. Faculty of Engineering. School of Petroleum.( March 2003)

To obtain a challenging position that utilizes proven experience and skills.

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

Electrical engineer (electronics) experience in the equipment of the Processing and quality control Activity area: Petroleum (2D & 3D land seismic data acquisition), skills: problem solving, self motivated, able to work under pressure in a challenging and a diverse cultural environment

A dedicated team player with excellent problem-solving skills. Valuable mechanical engineering experience in a variety of work environments: fabrication, project management, design in high tech, aerospace, automobile and offshore industries, cost control, QA/QC. AutoCAD, SACS, Inventor, Solid Edge

I’ve experienced in pipeline projects, sewage network system, drinking water network system hydraulics, river water and air quality models and EIA studies, etc.

PLC, HMI, SCADA, SENSORS

To your team I bring business, economic and industrial development knowhow. To complexity I provide logical reasoning and cultural competency. I apply monitoring and evaluation research methods and tools. My thought-work enables decision-making. It maximizes impacts, outcomes, and change.

Primavera Experience

11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.

Have certificate in Mechanical Engineering drafting with 12years experience in handling Autocad programme. currently based in Riyadh, KSA and handling drawing for Architectural, C&S & MEP.

I am an experienced gas plant operator and a well test night operator and have been in the oilfield for almost 6 years. I have 3 years of sour service experience

I have completed B.E,(Electrical & Electronics Engg) in may 2006 with 70% as the aggregate from Anna University(Kamban engg College) India.Having 2 years experience in transformer manufacture, Being given to understand that you are entertaining candidates for various positions

B.E. / 24Yrs / REC, Motilal Nehru, Allahabad. Work Experience: Projects/ Construction/ Consultancy/ Planning – 10yrs. Maintenance/ Planning/ ISO 9000 Implementation – 12yrs. Trainer / Q A & Q C /Turnover Documentation – 2yrs.

B.E. (Mechanical) with Piping Engineering from Indian Institute Of Technology, Mumbai.

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

Good in AutoCad, 6 years experince in 4 shipyards with main activity shipbuilding and repairing, youg, able to lear and fast adapting in diferent conditions.

Telecommunications Engineer, with Bsc. In Telecommunications and Electronics, present occupation on Telecommunications Network Resource Management, Planning & Design Telecommunication Circuits Serving Electrical Networks. Consultant Engineer: Alarabi Engineering Consultants.

Senior Electrical Engineer with over 20 years of manufacturing, industrial, chemical, and power plant field experience.

I have extensive experience in Environmental Sciences. I wrote my Thesis between the Universities of Zaragoza and Bordeaux 1 (France), which gave me the ability to work with people from different countries.

Secure a challenging engineering position where my team player attributes, experience, and communication skills can be utilized in obtaining personal career goals and those of the employer

First Prev 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 [ 188 ] 189 190 191 192 193 194 195 196 197 198 199 200 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out